Fiber optic media converter 10M/100M media converters and 1000M media converters Products capability: According with the protocals: IEEE 802.3 IEEE 802.3u Fast Ethernet and IEEE802.3ab Support long data packet Easily for setting and debugging Technology specification: Wavelength:1310nm and 1550nm LAN port speed:10M/100M and 1000M Transimission distance:20km 40km 60km 80km 120km
Features: -Broadcast filtering, address auto learning and auto-update feature and th operating mechanism of store and forward. -Cache size: 256KB, address table size: 4KB -Ethernet 10Base-T or 100Base-TX or 1000Base-T to 1000Base-LX fiber optic media converters -Support IEEE 802.3, IEEE 802.3U, IEEE 802.3X, IEEE 802.3z/AB, IEEE802.1d -Supports full-duplex or half-duplex backpressure flow control flow control, and with Auto-Negotiation function -Interface supports 1000Mbps, 100Mbps, 10Mbps, can use with notthe same rate. -TX/RX dual-header Standard SC interface -Electronical interface supports 10Mbps, 100Mbps, 1000Mbps -Automatically adapt , optical interface work rate 1000Mbps port -Integration of high-quality photovoltaic modules to provide good optical properties and electrical properties to ensure reliable data transmission -Status LEDs on link/connection status, dynamic data transfer/ full duplex / half duplex/rate status. -Provides one RJ-45 interface supports auto-electrical cross connect switches, hubs -Power Consumption: 4.5 W (Power adapter input AC-85V~ 265V) -Over 50,000 hours consistent working period. Transmission fiber: Multi-mode: 50/125, 62.5/125 or 100/140166;204;m Single-mode: 8.3/125, 8.7/125, 9 / 125 or 10/125166;204;m Operating temperature :0-50 161;227; C Storage temperature: -40-70 161;227; C Humidity: 5% -90% non condensing.
Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly. Features: Web, SNMP, Console management Hot-swappable module Available with ST, SC, or WDM Simplex SC single-fiber connectors Auto MDI/MDI-X on copper port Auto-negotiation on copper port LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision Link-Fault Signaling illuminates to indicate link failure Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link Local and remote loopback
Features: Lead-free Wavelength selectable to c-band itu-t grid wavelength No reference clock required Cold start up wavelength compliance Dwdm-rated eml transmitter and pin receiver Link length: 80km With rohs directive-compliant
Bandwidth: 40-1000mhz Ctb: 65db Cso: 61db 110 channels flat Vo: 30dbmv. 4pcs per box
Bandwidth: 40-1000mhz Ctb: -66db Cso: -65db 110 channels flat, optical power receiveing at -1dbm, measured at 547.25mhz for ctb, 548.5mhz for cso. Vo: 28dbmv. 2pcs per box
And have a monomode otical input suitable for 1290 to 1600nm wavelengths, a teminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75ª+
The amplifier supply voltage pin Connect to 24V (DC).The modules have a monomode optical input Suitablefor 1290 to 1600nm wavelengths, a terminal to monitor the photo diode current and an electrical Output having a characteristic impedance of 75ª+.
Optical cable Application: CATV Test equipment Metro Applications Active device termination Local Area Networks (LANs) Data processing networks Premise installations
PHYSICS OF FIBER OPTICS TRAINER is designed to learn basic physics of fiber optics including fiber end preparation. Students can also study the construction of transmitter & receiver to form analog & digital link. Ample number of experiments can be performed with this kit by referring to the exhaustive manuals provided with the kit. Features: 01. On-board Function Generator. 02. Transmitter : 1 No. 03. Receiver : 2 Nos 04. Fiber Optic Analog Link. 05. Fiber Optic Digital Link. 06. Signal strength indicator. Technical Specification: 01. Transmitter : 1 No. LED. Peak wavelength of emission 635 nm Red visible. 02. Receiver : 2 Nos. silicon photo detectors 03. Modulation : Intensity modulation. 04. Driver Circuit : Analog and digital configuration for 635 nm LED. 05. Analog Bandwidth : 35KHz. 06. Digital Bandwidth : 50KHz. 07. On-Board Function Generator : 08. Sine Wave &TTL Square Wave : 09. Frequency Range : 1Hz to 10Hz, 10Hz to 100Hz, 100Hz to 1 K H z , 1 K H z t o 10KHz 10. Amplitude : 0 to 4Vpp. (Except Square) 11. Voice Communication : Fiber Optic voice link using dynamic MIC &SPEAKER 12. Signal strength indicator : 8 LED's provided to m e a s u r e o p t i c a l power. 13. Fiber Optic Cable: 14. Type : 1000 micron Step Index, Multimode Plastic Fiber 15. Fiber Lengths : 1&5 Meter. 16. Power Supply : GND, +5V, +12V, -12V at100mAINT.
The product includes: optical fiber, loose tube, fiber compound, cable core, strengthened steel wire, water blocking tape, steel-composite belt, sheath with Kevlar. Characteristics of technic: damp proof, Aerial ground Characteristics of the product: Optical fiber coating loose tube, fill in fiber compound, Strengthened steel wire in the middle, tube gasket around steel wire as SE intertwist, cable fiber fill in cable core, and then coating water blocking tape, double-faced PE outer jacket Best SE interwist product optical fiber away from drawing and press. Ensure the machine of optical fiber, environment function adapt damp-dry waterblocking fiber, dependable waterproof function, avoid shift, high camber, damp proof, high bulletproof.
Both X and Y axis display Large multiple & visible fiber core Turn-over display screen to use conveniently Inner light to set fiber at night Auto check end-face of fiber Auto calculate splicing loss Auto select suitable fusion program Small bulk and light weight & alternating /Direct Current available Screen menu for simple operation Concave weatherproof cover & Max. wind velocity of 15m/s
This product is used as the terminal ending and distribution of the main, optical fiber cable of the central office in the optical fiber cable, communication system. It can realize the connection, distribution, and dispatching of the fiber circuit.And it is the distribution connection equipment between the optical fiber cable and the fiber cable communication system.
Widely used in the city and country cable network The data and graph transfer system, the catv wired tv series The direct and branch connection of the indoor cable, which acts as pigtail storage and connector protection It is made of cold-rolled steel sheets by electrostatic plastic spraying And has proper structure and neatly-looking We can fix the cable by strengthening core in the terminal box, and its ports can be replaced according to the practical engineering requirements.
GLSUN SFP-25G-CWDM-1270-10-T02, CWDM 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gb/s Wavelength 1270nm~1370nm Max Cable Distance 10km Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 3.5dB Media SMF Power Consumption
QSFP28-100G-CWDM4-T02 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four CWDM with 1271, 1291, 1311, and 1331 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.
Summarize The NE100 Optical transmission platform can be as a converge center of optical transmission system in headend and hub to increase network reliability, scalability and cost-effective deployments. NE100 provide high usable module density (up to 14 modules in 4RU chassis), smart management in local or through SNMP, simplified installation, optional redundant powering, hot-swappable modules. Features Convenient: Blind-mate RF adaptors on the back-plane. Simple insertionand removal of modules; vacuum fluorescent display and navigation buttons for use as a simple interface for local status monitoring and control High Density: Capable of accommodating up to 14 application modules in a 4RU chassis Universal: Application modules can be located in any slot. Hot-swappable Modules: All application modules are hot-swappable modules, time-delay and protection circuit inside Intelligence: CPU intelligent system controller, monitoring the output voltage of power module and the system temperature; Blue-Screen VFD display the work status of the system; Element Management interface and independent TCP/IP server, ease to manage remotely High Reliability: two additional slots in the rear accommodate the AC and/or DC power supplies (120/240 Vac or -48 Vdc). One is main power supply, another is redundant, heat switched automatically Configurations Chassis Model Descriptions NE100-H Housing (only),no power NE100-H1 Housing, 1 NE100-PSAC NE100-H2 Housing, 2 NE100-PSAC NE100-H3 Housing, 1 NE100-PSDC NE100-H4 Housing, 2 NE100-PSDC Powering Modules Model Descriptions NE100-PSAC AC Power Supply 180~264V,50/60Hz NE100-PSDC DC Power Supply,-48v Application Modules Module Descriptions TFT100-(output power,mw) Forward 1310nm Optical Transmitter 4~20mw TFR100 Forward optical receiver TRR100 Single Reverse Optical Receiver TRR120 Dual Reverse Optical Receiver TRT100F Reverse Optical Transmitter,FP TRT100D Reverse Optical Transmitter,DFB TRT100C Reverse Optical Transmitter,CWDM NE100-H Chassis Technical Specifications Items Specifications Dimensions(Hí-Wí-D) mm 177í-437í-550 Slots 14 Power supply AC,180~264v 50/60 Hz, or DC,-48V RF Connectors F-Type Weight kg 20 Ordering Information: Model Number Descriptions NE100-H Chassis (only),no power NE100-PSAC AC Power Supply 180~264V,50/60Hz NE100-PSDC DC Power Supply,-48v NE100-H1 Chassis, 1 NE100-PSAC NE100-H2 Chassis, 2 NE100-PSAC NE100-H3 Chassis, 1 NE100-PSDC NE100-H4 Chassis, 2 NE100-PSDC PS100 AC & DC Power Supplies Summarize The PSAC and PSDC are power supply modules that provide AC and DC voltages for the NE100 optical broadband transmission platform, the module is installed in the rear of the Housing accommodates two power supplies for true power source redundancy. When two power supplies are used, the load is shared between both supplies. If one supply fails, the other immediately picks up the additional load. Features 1. High reliability. 2. Low output voltage 3. Dual power supply hot-switched Specifications Input Voltage 180-270V 50HZ AC 40-72VDC DC Output +24.4V7A +5.4V 8A -5.4V 8A Efficiency >85% Note: PSDC-48V, -48V DC Power Supply. 10KG
Powellenses is one kind of opticaruling lens, xi'an lingyue machinery&electr.Ltd.Cnsupply powellenses that divergence angle from 10íp to 100íp, the standard have 30íp\45íp\53íp\60íp\70íp\85íp\90íp. When 1mm laser bean get through the powellenses, it is optimized transformed a line which is uniform, stability, straight .Lineation by powellenses is better than aspheric lensse, as by powellense can cancelling centrahotspot of gaussian beams and fade-marginadistribution. Applied range: Laser scriber Machining -position by makeing Building- graticule by makeing Laser scanning system Customs can order by index following Divergence angle Work distance Beam wavelength or beam diameter Width of lineation. Standard: Divergence angle materials 30íp bk7 45íp sf6 53íp bk7 60íp sf6 70íp sf6 85íp sf6 90íp sf6.
Features: Suitable for the protection of fiber cables, the scope of application includes aerial, underground, pipeline, and hand hole Fixed and sealed by insert plates and bolts Standard splice trays with single tray access and up to 192 fibers splicing Up to six inlet/outlet ports, configured with one set plastic seal fittings Adopts the turnover structure, convenient for fixing sleeve, winding fiber cable, enlarging and repairing High quality PC material Easy operation Specifications: Housing dimensions (L x W x H): 450 x 216 x 160mm Cable inlets/outlets: six pieces Diameters of cable inlets/outlets: ª+23 (2), ª+20 (2), and ª+16mm (2) Splice trays available: 12 and 24 cores Number of trays: one to eight pieces Splice capacities: 12 to 192 cores
1> Long distance and local light transmission network 2> Data Transmission network, various kinds of testing and self-control system 3> Realizes connection of transmission of fiber optical 4> Simplex and duplex patch cords available 5> multimode and singlemode optional 6> Single mode fiber :8/125,8.3/125,8.7/125,9/125 um Multimode fiber :50/125 ,62.5/125 um 7> Connector: ST/SC/FC/LC/DIN/MTRJ/ D4/MU/E2000/SMA optional 8> made by advanced ceramic sleeve 9> PC, UPC, APC polishing cartons
