The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient. Basalt fiber roving is a new material to replace glass fiber and carbon fiber
Fiberglass mesh is made by C-glass or E-glass fibers woven roving as its basis material, and then treated with Acrylic Acid Copolymer liquid. An ideal construction engineering material, Alkali Resistant Fiberglass Mesh fabric is mainly used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications. Specifications: Opening Sizes: 3x3mm, 4x4mm, 4x5mm, 5x5mm,6x6mm, 8x8mm, 10x10mm Weight: 60 - 350g/m2 Width:1-2m Color: blue, orange, white, yellow, etc. Packing: shrink film then carton or woven plastic bag. Features: í-Excellent alkaline resistance and corrosion resistance í-High tensile strength and impact resistance í-Good dimensional stability and deformation resistance í-Good adhesion with resins and water resistance í-Temperature stability and flame resistance í-Soft, flexible and well arranged, simple and easy to apply í-Resistance to aging í-Durable, versatile and cost-effective Uses: fibergass mesh is widely used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications. Self-adhesive Fiberglass Mesh Tape: Is woven from fiberglass bulk yarn then coated with anti-alkaline resin and gum solution cut from a special machine. It could used on reinforcing wall cracks,board cracks,plasterboard cracks and marble cement,in addition to repairing drywall joints. Features: 1.It is a kind of woven fiberglass,alkali-resistant netlike fabric that has been coated with adhesive and cut into the required sizes 2.Sizes:50mm*20m,50mm*45m,50mm*90m,50mm*150m Etc. 3.Ideal material to repair damaged dry wall,cracks and holes 4.Very easy and quick to apply it 5.Packing:one roll with shrink film packing or plastic bag. Then 24 rolls or 54 rolls or 72 rolls for one carton or pallet
Description Alkali resistant fiberglass mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex. It has fine alkaline-resistant, high strength, etc. As an ideal engineering material in construction, it is mainly used to reinforce cement, stone, wall materials, roofing, and gypsum and so on. We can produce any size mesh according to requirements of customer like different mesh size and weight per square meter. We can supply special mesh as following 1. High strength mesh, 2. Fire proof mesh . 3. Strong and fl exibl e mes h We can supply specifications from 30g/m2 to 500g/m2 for mesh. Main size: 5mm x 5mm or 4mm x 4mm, 75 g/m2, 90 g/m2, 125 g/m2,145 g/m2, 160 g/m2. Application 1. Wall reinforced material (such as fiberglass wall mesh, GRC wall panels, EPS insulation with the wall board, gypsum board, bitumen) 2. Reinforced cement products. 3. Used for Granite, mosaic, marble back mesh etc. 4. Waterproof membrane fabric, asphalt roofing. Example of applications 1. 75g / m2 mesh fabric used in the reinforcement of thin slurry, to eliminate small cracks and scattered throughout the surface pressure. 2. 110g / m2 mesh cloth is widely used in indoor and outdoor walls,prevent the various materials(such as brick, light wood, prefabricatedstructure) of treatment or caused by a variety of expansion coefficient of wall crack and break. 3. 145g/m2 mesh fabric used in the wall and be mixed in variousmaterials (such as brick, light wood, prefabricated structures), to prevent cracking and scatter the whole surface pressure, especially in the external wall insulation system (EIFS). 4. 160g / m2 mesh fabric used in insulator layer of reinforcement in the mortar, through shrinkage and temperature changes by providing a space to maintain movement between the layers, prevent crack and rupture due to shrinkage or temperature change. Specification Mesh size 5x5 mesh, 5x4 mesh, 4x4 mesh, 3x3 mesh, 2.5x2.5 mesh, 1x1 mesh Weight/square meter 60g-300g Each roll length 10m, 20m, 30m, 50m-300m Width 0.5m-2m Mesh size 16x16 mesh, 15x14 mesh, 12x12 mesh, 10x10 mesh, 9x9mesh, 8x8 mesh, 6x6 mesh Weight/square meter 40g-120g Each roll length 10m, 20m, 30m, 50m-300m Width 0.05m-2m Packing plastic packing or woven bag or packing according the customer's requirements Color white,blue,green,red,yellow,
Reinforced fiberglass mesh High strength mesh, eifs mesh available, strong and flexible mesh 1.Fiberglass mesh for wall reinforces; 2.Mainly used for interior wall and external wall reinforces, eifs construction, and etc; 3. Various color available, width range:0.6m-1.1m; 4.Customized service available Mesh weight: 70gsm, 80gsm, 90gsm, 110gsm, 120gsm, 135gsm, 145gsm, 150gsm, 160gsm, 165gsm, 300gsm. Any color available. Size:1x50m/roll Mesh size:4x4mm, 5x5mm, 10x10mm, 12x12mm, etc
The fabric is made from c-glass or e-glass woven roving as its basis material, then is treated by alkali-resistant macromolecule latex. Coated by acrylic acid copolymer liquid. The properties of good alkaline resistant, good cohesion, flexibility, tensile strength, etc. Used:it can also reinforce cement, plastic, bitumen, plaster, marble, mosaic.Used in out-side wall heat insulation, roof waterproof and it is an ideal engineering material in construction.
DESCRIPTION: CMIs Fiberglass Mesh is a ready-to-use, thin, strong yet flexible alkali-resistant mesh for reinforcement of joints, corners, coves and hairline crack repair. It has a high resistance to tearing and stretching, protects the surface from cracking and improves its mechanical strength. In addition, it does not decompose and will not rust over time. USES: Reinforces joints and high stress area of AAC blockwall listed below: #Joint between block wall to reinforced concrete structures (beams, columns & slabs) #High stress areas such as corners and bottom of openings (doors or windows) #Wall chases #Hairline crack repair
The fiberglass alkaline-restance mesh fabric is on the basis of c-glassor e-glass woven fabric, then coated by acrylic acid copolymcrliquid. Mesh size:3x3mm 4x4mm 5x5mm 10x10mm Weight:30-300g Length:50m-100m Width:20cm-200cm Color:white, orange, blue, etc.. Packing 1. Shrink only. 2. Shrink and woven bags. 3. By shrink film first each roll, then put into carton Delivery:within 15 days after receipt of deposit.
Fiberglass self-adhesive mesh tape, fiberglass alkali-resistance mesh, wall patch, flexible metal corner tape, sanding screen, and sanding sponge.
The fiberglass alkaline-restance mesh fabric is on the basis of c-glassor e-glass woven fabric, then coated by acrylic acid copolymcrliquid. Mesh size:3x3mm 4x4mm 5x5mm 10x10mm weight:30-300g length:50m-100m width:20cm-200cm color:white, orange, blue, etc.. Packing 1. Shrink only. 2. Shrink and woven bags. 3. By shrink film first each roll, then put into carton delivery:within 15 days after receipt of deposit
Urea n46, diesel en590 10ppm, jet fuel a1, dap, basalt fiber products, nitrocellulose centralite ii wind turbine gearbox accessories.Import and export of goods and technology
Physical presentation : Granular Color : White (yellowish) Percent % : min 97% Application : Textile Auxiliaries.
Gas lighter, led screen protector ( not even in domestic ), refill paper cups, table runner, earing brass clamp, auto brass electric parts, cashew nuts, wire mesh, petha sweet, niwar, mohini powder, vermicompost, dry bath incubator, test tube plastic, sordium citrate tube, health care product, ornamental freshwater fish, safed musli, used polymer bag, cotton linter, auto hood cover, areca plate, rice.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Fiberglass Reinforced Plastic grating is made by interlacing glass fibers and molded by resin casting. With its many rectangular and square spaces, it provides two-dimensional homogeneous mechanical characteristics. The typical size of the product is - 1220 x 3660 mm. However, it is available in different mesh sizes and thickness - Advantages - Easy to assemble - High Load-bearing capacity - Easy to install and maintain / repair - Durable in harshest environments - Suitable for ventilation and natural lighting
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
LED light.
Pvc doors, doors with mdf molded door skins- with grains, white enamel painted, melamine faced, natural wood veneer, artificial veneer. Steel security doors. Flush doors Solid wooden doors with: oak, red cherry, sapelli, golden teak, merbau, walnut, rosewood, teak etc. Various panel designs. Door with frame. Moulds (casing).
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
1> Feature : Adjustable 2> 90° wall mount hinge , 180° glass to glass 3> Glass thickness : 8 mm~12 mm 4> Max door weight : 36 kg (with 2 hinges) 5> Material : Solid Brass 6> Some models do have auto self-closing function within 25° at both sides 7> Mickey Mouse ear design.
