Product Introduction MBTS is an accelerator of NR and SR. It has level and middle cure rate and higher Vulcanization temperature. It operates safely disperses easily and does not contaminate. It is aging resistant. White or light yellow powder or granule with slightly bit-ter taste, nonpoisonous. Application Mainly used in manufacture of tires, rubber tubes, rubber shoes, rubber cloth and other technical rubber goods. Accelerator MBTS works as plasticizer and delayed action activator in poly-chloroprene. Packing: In knitted bag lined with plastic bag or Kraft paper bag. 25kgs/bag or at buyer's request.
Product Introduction DPG without odour and poison. Density:1.13-1..19g/m.Easily soluble in acetone ethyl acetate; Soluble in benzene, ethanol; Slightly soluble in ; Insoluble in water and gasoline Application Generally used for natural and synthetic rubbers. Mainly used in manufacture of tires, slab rubber, rubber shoes and other technical rubber products. Packing: In knitted bag lined with plastic bag or Kraft paper bag.2.5kgs/bag or at buyers' request.
Product Introduction CBS(CZ) is an accelerator with high activity and has greatly delayed action, high anti-scorching quality, processing safety, short cure time. its activity can be reinforced by thiuram and dithiocarbamate type alkaline accelerators. Application CBS(CZ) mainly used in manufacture of tires rubber shoes rubber tube cable and other technical rubber goods. Packing: In knitted bag lined with plastic bag or Kraft paper bag.2.5kgs/bag or at buyers' request.
Chemical Name: 2-4-Morpholinodithio benzothiazole Specification: Item Powder Oiled powder Granule Appearance Light yellow powder(granule) Initial M.P. �¿C â?¥ 125.0 125.0 125.0 Loss on drying % â?¤ 0.30 0.50 0.30 Ash % â?¤ 0.30 0.30 0.30 Residues on 150�¼m sieve, % â?¤ 0.10 0.10 -- Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 1.50 Properties: Light yellow powder (granule).Density is 1.51g/m3.Soluble in chloroform, partly soluble in CS2,acetone,insoluble in Sherwood oil, benzene, alcohol and water. Application: Fast-curing primary or secondary accelerator for Nr, SBR, Nitrile and EPDM. Less scorch, blooming and good processing safety. Can be used in CR as an anti-scorching agent. The efficiency sulphur content is 11%. Packaging: 25kg plastic woven bag , paper with plastic film bag. Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1year.
Chemical Name: Tetrabenzylthiuram disulfide Specification: Item Powder Oiled powder Granule Appearance Light yellow powder(granule) Initial M.P. �¿C â?¥ 124.0 124.0 124.0 Loss on drying % â?¤ 0.30 0.50 0.50 Ash % â?¤ 0.30 0.50 0.50 Residues on 150�¼m sieve, % â?¤ 0.10 0.10 -- Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 1.50 properties: Light yellow powder(granule),specific gravity:1.40 Application: Developed to replace thiurams such as TMTD for the presence of nitrosamines is of concern The dibenzylnitrosamine is not carcinogenic according to published literature. It is the primary or secondary accelerator in NR, SBR and NBR system. It is safer to progress, and can provid longer anti-scorch time than TMTD. Sometime used as the retarder in the vulcanisation of PVC rubber. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: The product should be stored in the dry and cooling place with good ventilation, avoid the packaged product to direct sunlight. The product with pallet should not be stacked. Stacking of palletized material or temperature of above 35C can cause unusual compacted product. The validity is 2 years.
Chemical Name: Tetraethyl thiuram disulfide Specification: Item Crystal Oiled crystal Granule Appearance Light yellow crystal(granule) Initial M.P. �¿C â?¥ 66.0 66.0 66.0 Loss on drying % â?¤ 0.30 0.40 0.30 Ash % â?¤ 0.30 0.40 0.40 Residues on 840�¼m sieve, % â?¤ 0.00 0.00 -- Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 2.50 Properties: Light yellow crystal(granule). Odorless. Specific gravity: 1.27--1.30. Soluble in benzene, toluene, carbon disulphide, acetone and chloroform; Insoluble in water, dilute acid and alkali, partly soluble in gasoline and alcohol. Sensitive to skin and mucosa. Have certain toxicity, good storage stability. Application: A primary accelerator and curing agent for NR, SBR, nitrile and EPDM. The efficiency sulphur content is 11%. Closely resembles Accelerator TMTD in its applications. Have high catalytic action to acids and guanidine type accelerator. Less scorch and blooming, good processing safety. Can be used in CR as an anti-scorching agent and as raw material for germicide, pesticide and medicine. Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The product with pallet should not be stacked. Stacking of palletized material or temperature of above 35â?? can cause unusual compacted product.The validity is 2 years.
Density: 1.34g/cm3 Boiling Point: 378.1ºC at 760mmHg Refractive Index: 1.631 Vapor Pressure: 6.45E-06mmHg at 25°C HS Code: 2934999090
DPG (D) GRANULE AND POWDER CHINA , Technical Name: Diphenyl guanidine Appearance: White or grayish white powder or granule, Melting point:144.0 Generally used for natural and synthetic rubbers. Mainly used in manufacture of tires, slab rubber, rubber shoes and other technical rubber products.
Acceleration Sensor Shock Damper ( Front ) For " Porsche " Part Number : 99160611100
Pedal And Bracket - Accelerator For " Land Rover & Jaguar "' Part Number : LR046109
Rubber accelerator dpg Chemical name:diphenyl guanidine Molecular formula:c13h13n3 Cas no:102-06-7 Specification: Appearance Gray-white powder Initial m.P. Oc 144.0 Heating loss 0.40 Ash 0.40 Residues on sieve(150m), % 0.10 Properties:grayish-white powder. No taste, no poison. Densiy is 1.08-1.19. Soluble in acetone, ethyl acetate, benzene, alcohol, slightly soluble in ccl4; insoluble in water and gasoline. Application:used as a secondary accelerator with thiazoles and sulphenamides in nr and sbr compounds. Exhibits better storage stability compared to thiuram and dithiocarbamates but is not so active. Dpg can be used in latex as secondary gelling agent (foam stabilizer) in the silico-flouride foam process Packing: 25kg in kraft paper bag with pe bag inside, or 25kg in plastic woven bag with pe bag inside, or as customers request. Storage:keep in a cool, well-ventilated place. The shelf life is 2 years. Notes: the products could be oil coated powder, as per customers request.
Dibenzothiazole disulfide Cas no: 120-78-5 Specification: no. Itemunitspecification 1appearance light-yellow powder 2initial m. P. (min)c162.0 3loss on drying (max)%0.40 4ash (max)%0.50 5residues on 63um sieve (max)%0.50 6oil content (*)%0; 1.0--2.0 Properties: a little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: given flat, moderately fast cures in nr and sr. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synth etic polymers. Better scorch safety than mbt. Storage: keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions. Packaging: 20kg bag.
Chemical Name:N-Cyclohexyl-2-benzothiazole sulfenamide Molecular Formula:C13H16N2S2 Molecular Weight: 264.41 CAS NO:95-33-0 EINECS NO.: 202-411-2 Specification: Appearance Gray-white powder Initial M.P. oC min98.0 heating loss % max 0.30 Ash% max 0.30 Residues on sieve(150μm), % max 0.10 Application:CBS has excellent scorching property, high curing rate, high modulus of vulcanized rubbers, wide range of application. It is a sulfenamide accelerator with the highest activity in EPDM. Packing:25kg in kraft paper bag with PE bag inside.
Chemical Name:Zinc diethyl dithiocarbamate Molecular Formula:C10H20N2S4Zn Molecular Weight: 361.93 CAS NO:14324-55-1 EINECS NO.: 238-270-9 Specification: Item Powder Oiled powder Granule Appearance (visual inspection) white powder(Granule) Initial M.P. oC� 174.0 174.0 174.0 heating loss %� 0.40 0.40 0.40 Zinc content % 17.5-19.0 17.2-18.7 17.2-18.7 Residues on sieve(150μm), % � 0.10 0.10 Residues on sieve(63μm), % � 0.50 0.50 Oil content, % \ 1.0-2.0 Granule diameter, mm \ \ 1.5-2.5 Properties:White powder (granule). Density is 1.41. Soluble in 1% NaOH solution, CS2, benzene, chloroform, slightly soluble in alcohol, insoluble in gasoline. Application:ZDEC is used as primary or secondary accelerator for NR, SBR, IIR or EPDM; also used for natural rubbers or synthetic latex; as anti-oxidant for rubber-based adhesives. Packing:25kg in kraft paper bag with PE bag inside. Storage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Chemical Name:N-Cyclohexyl-2-benzothiazole sulfenamide Molecular Formula:C13H16N2S2 Molecular Weight: 264.41 CAS NO:95-33-0 EINECS NO.: 202-411-2 Specification: Appearance Gray-white powder Gray -white granular Initial M.P. oC� 98.0 98.0 heating loss %� 0.30 0.30 Ash%� 0.30 0.30 Residues on sieve(150μm), % � 0.10 Properties:Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. M.P.: 98oC above. Soluble in benzene, boluene, chloroform, CS2, CH2Cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water, gasoline, acid / alkali with lower concentration Application:CBS has excellent scorching property, high curing rate, high modulus of vulcanized rubbers, wide range of application. It is a sulfenamide accelerator with the highest activity in EPDM. Packing:25kg in kraft paper bag with PE bag inside. Storage:Stored in cool, dry and draughty place; avoid direct sunlight; protect against moisture or high temperature. The validity is 2 years.
Dibenzothiazole disulfide Cas no: 120-78-5 Specification: no. Itemunitspecification 1appearance light-yellow powder 2initial m. P. (min)c162.0 3loss on drying (max)%0.40 4ash (max)%0.50 5residues on 63um sieve (max)%0.50 6oil content (*)%0; 1.0--2.0 Properties: a little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: given flat, moderately fast cures in nr and sr. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than mbt. Storage: keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions. Packaging: 20kg bag.
Rubber accelerator cbs Chemical name:n-cyclohexyl-2-benzothiazole sulfenamide Molecular formula:c13h16n2s2 Cas no:95-33-0 Specification: Appearance Gray-white powder Gray -white granular Initial m.P. Oc 98.0 98.0 Heating loss % 0.30 0.30 Ash% 0.30 0.30 Residues on sieve(150î¼m), % 0.10 Properties:gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. M.P.: 98oc above. Soluble in benzene, boluene, chloroform, cs2, ch2cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water, gasoline, acid / alkali with lower concentration Application:cbs has excellent scorching property, high curing rate, high modulus of vulcanized rubbers, wide range of application. It is a sulfenamide accelerator with the highest activity in epdm. 25kg/bag
Rubber accelerator tmtd Specification: Chemical name:tetramethyl thiuram disulfide Cas no: 137-26-8 Specification: no.Itemunitspecification 1appearance-white powder 2initial m.P. (min)c142.0 3loss on drying (max)%0.40 4ash (max)%0.30 5residue on 150m sieve (max)%0.10 Properties:no odor and poison. Irritating to the skin and the respiratory tract. Specific gravity: 1.38--1.44. Soluble in chloroform, acetone, benzene; hardly soluble in carbon tetrachloride, ethyl alcohol & insoluble in water or gasoline. Application:can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and ev cure systems. Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for epdm. May be used as a retarder in the vulcanisation of polychloroprene rubber with etu. Storage:keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
We produce various kinds of Rubber accelerators,including M,DM(MBTS),CBS(CZ),TMTD,NOBS(MBS),NS(TBBS),Stearic Acid,Coumarone,Sulphur and other Chemical products with reliable quality and competitive price.For more information,please contact us!
We produce various kinds of Rubber accelerators,including M,DM(MBTS),CBS(CZ),TMTD,NOBS(MBS),NS(TBBS),Stearic Acid,Coumarone,Sulphur and other Chemical products with reliable quality and competitive price.
