Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels.
Standard
JIS, AISI, ASTM, GB, DIN, EN, BS ETC.
Material
Incoloy 825
Specifications
Round bar
Diameter:0.1~500mm
Hexagonal bar
Size: 2mm~100mm
Flat bar
Thickness
0.3~200mm
Width
1~2500mm
Square bar
Size: 1mm*1mm~800mm*800mm
Length
2m, 5.8m, 6m, or as required.
Surface
Black, peeled, polishing, bright, sand blast, hair line, etc.
Price Term
Ex-work, FOB, CFR, CIF, etc.
Export to
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time
Standard size is in stock,prompt delivery or as order's quantity.
Package
Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment
* Hastelloy C-276 alloy is one of the few materials that can be used in hot concentrated sulfuric acid solution It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance at low and medium temperatures. Therefore, in the past 30 years, it has been widely used in harsh corrosive environments, such as chemical industry, petrochemical industry, flue gas desulfurization, pulp and paper making, environmental protection and other industrial fields.
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.
Package : Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
Product Details:
Material Grade : Super Duplex DIN 1.4462 Round Bars
Single Piece Length 6 meter, 3 meter
Thickness/Diameter : 2-3 inch, 1-2 inch, 3-4 inch, >4 inch, 0-1 inch
Shape : Round
Grade : Super Duplex DIN 1.4462 Round Bars
Packing Type : Loose / wooden Pilot packing
Surface Treatment : Black or Export Broght
Diameter 10 mm to 100 mm
Weight : depends upon length & size
Finishing : Smooth Bright finish
Steel Grade : Super Duplex DIN 1.4462 Round Bars
Surface Finish : Cold Rolled
Tolerance : H7,H11
Customisation Customised
Color : Export Bright
Material : Nickel Alloy
Condition : New
Super Duplex DIN 1.4462 Round BarsProduct Details:
Thickness/Diameter : 0-1 inch
Material Grade : Duplex and Super Duplex rods
Application : Manufacturing
Single Piece Length 3 meter
We have a wide variety stock of rebar, available dimensions from 8 mm to 32 mm,grades 60,40 ASTM A615,and BS4449, lengths 4,5,6,9,and 12 meters,plain,and deformed bars. Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry.
Product Details
Surface Finish Polished
Material Grade 304L 316L 304 316
UsageApplication Construction
Application Oil Gas Industry Construction Rail Coach Factory Pharmaceutical Chemical Industry Automobile Industry
Technique Hot Rolled
I Deal In New Only
Country of Origin Made in India
With the valuable support of adept team of experts Metal Aids India is offering a wide range of high quality SS Flat The offered flat strip is offered in varied dimensions to cater the needs of different industry segments such as metallurgy chemical petroleum medical industry This flat strip is manufactured keeping in mind the standard of industry using high class raw material latest technology The provided flat strip is well checked on several quality parameters for delivering a flawless range
Features
Optimum strength Corrosion resistance Longer life
Specifications
Diameter 554000 mm Length Max 12000 mm Hardness 91915Grades304316309310304L316L321
59055 630 Duplex Stainless Steel Bar Suppliers
Short on time? Let 630 Duplex Stainless Steel Bar sellers contact you.
* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties.
* Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel.
Material : API5L
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : �±0.1mm
Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
* Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
* Technique : Hot rolled,cold rolled
Surface Treatment
* Clean, blasting and painting according to customer requirement
Thickness tolerance
+ 0.1mm
* Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
* Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
* A179 is a steel grade produced according to American ASTM standards, which belongs to American standard. A179 Carbon steel round bar is applicable to cold drawn high-quality low-carbon seamless steel pipe for heat exchanger and condenser.
* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material : A179
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : + 0.1mm
Application :
* It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
* A214 is a steel grade produced according to American ASTM standards, which belongs to American standard.
* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material : A214
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : + 0.1mm
Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
* A53 is a steel grade produced according to American ASTM standards, which belongs to American standard. A53 Carbon steel round bar manufacturing requires parts with low stress and high toughness, such as car body, container, deep stamping vessels, pipes, gaskets, etc., which can be used for cold rolling, cold punching, cold heading, cold bending, hot rolling and other processes, as well as carburizing parts with low central strength, carbonitriding parts, etc.
* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
* Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material : A53
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : + 0.1mm
Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
Our stainless-steel channels are hot rolled for superior strength and corrosion resistance. Ideal for structural support in construction and fabrication, they provide excellent durability and load-bearing capacity. Available in various sizes to meet your project needs.
Size Range â?? 69 x 28 x 5, 63 x 38 x 6, 75 x 40 x 5, 75 x 40 x 6 mm, 100 x 50 x 5 mm, 100 x 50 x 6 mm, 50.8 x 25.4 x 4.76 mm, 50.8x 25.4 x 6.35 mm
Size Range (Inch) â?? 69 x 28 x 5, 63 x 38 x 6, 75 x 40 x 5, 75 x 40 x 6 mm, 100 x 50 x 5 mm, 100 x 50 x 6 mm, 50.8 x 25.4 x 4.76 mm, 50.8x 25.4 x 6.35 mm
All grades of Austenitic, Ferritic, Martensitic, Duplex & Super Duplex and High Alloys
* A106 GrB strength grade 415MPa. ASTM A106Gr. B carbon steel round bar is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Carbon steel round bar for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 â?³ - 28 â?³, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials.
* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material : A106Gr. B
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment
* Clean, blasting and painting according to customer requirement
Thickness tolerance : + 0.1mm
Application :
* It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing
* Waterproof paper, and steel strip packed.
* Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts
Product Details:
Thickness/Diameter 2-3 inch, >4 inch, 3-4 inch, 1-2 inch, 3 meter, 0-1 inch
Finish Customised, Polished
Shape Corrosion Resistant, Round
Condition Pharmaceuticals
Is It Anodized Anodised
Customisation New
Is It Corrosion Resistant Anodized
Application Construction, Automobiles, Manufacturing
Is It Anodised Unpolished
Minimum Order Quantity 250 Kilogram
Brand Cromonimet Steel Ltd, Imported
Payment Terms 100% Advance Against Proforma Invoice. Sorry no credits
Third Party Inspection (TPI) Allowed. Charges to be borne by buyer.
Test Certificate NABL Government approved laboratory reports can be provided.
Grade 316L, AISI 316L, SAE 316, Stainless Steel 316L, Austentic 316L Stainless Steel, SS 316L, SS316L
Size 1-10 mm, 10-20 mm, 20-30 mm, 30-40 mm, >40 mm
Unit Length 3 m / 6 m
Material Stainless Steel
We can offer 316L, AISI 316L, SAE 316L, Stainless Steel 316L Round Bar & Rods, 316L round bars, Stainless steel 316L rods, Stainless steel 316L Flat bar, 316Lstainless steel square bar, 316L rectangular bar, 316L rolled bar, 316L forged bar, 316L machined rod.
Grade 316L represents the optimum in machinability among the austenitic stainless steels. It is primarily used when production involves extensive machining in automatic screw machines. Machinability Rating (compared to B1212) is approximately 78%.
Client can procure smaller quantities of Stainless 316L steel Bar & Rod online ready stock from us at premium prices in any destination by just sending us an email.
If any requirements for 316L, AISI 316L, SAE 316L, Stainless Steel 316L Round Bar & Rods, 316L round bars, Stainless steel 316L rods, Stainless steel 316L Flat bar, 316Lstainless steel square bar, 316L rectangular bar, 316L rolled bar, 316L forged bar, 316L machined rod kindly do contact us.
Product Details:
Thickness/Diameter 2-3 inch, >4 inch, 3-4 inch, 1-2 inch, 3 meter, 0-1 inch
Finish Customised, Polished
Shape Corrosion Resistant, Round
Condition Pharmaceuticals
Is It Anodized Anodised
Customisation New
Is It Corrosion Resistant Anodized
Application Construction, Automobiles, Manufacturing
Is It Anodised Unpolished
Minimum Order Quantity 250 Kilogram
Brand Cromonimet Steel Ltd, Imported
Payment Terms 100% Advance Against Proforma Invoice. Sorry no credits
Third Party Inspection (TPI) Allowed. Charges to be borne by buyer.
Test Certificate NABL Government approved laboratory reports can be provided.
Grade 316L, AISI 316L, SAE 316, Stainless Steel 316L, Austentic 316L Stainless Steel, SS 316L, SS316L
Size 1-10 mm, 10-20 mm, 20-30 mm, 30-40 mm, >40 mm
Unit Length 3 m / 6 m
Material Stainless Steel
We can offer 316L, AISI 316L, SAE 316L, Stainless Steel 316L Round Bar & Rods, 316L round bars, Stainless steel 316L rods, Stainless steel 316L Flat bar, 316Lstainless steel square bar, 316L rectangular bar, 316L rolled bar, 316L forged bar, 316L machined rod.
Grade 316L represents the optimum in machinability among the austenitic stainless steels. It is primarily used when production involves extensive machining in automatic screw machines. Machinability Rating (compared to B1212) is approximately 78%.
Client can procure smaller quantities of Stainless 316L steel Bar & Rod online ready stock from us at premium prices in any destination by just sending us an email.
If any requirements for 316L, AISI 316L, SAE 316L, Stainless Steel 316L Round Bar & Rods, 316L round bars, Stainless steel 316L rods, Stainless steel 316L Flat bar, 316Lstainless steel square bar, 316L rectangular bar, 316L rolled bar, 316L forged bar, 316L machined rod kindly do contact us.
We are suppliers and exporters of Inconel alloy Rod, Pipes, Tubes, Plate, Fitting, Flanges, Flat etc in the grade Inconel 600, 601, 625, 718, Incoloy 800, 801, 825 etc.
Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration.
Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe.
Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes.
It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.
Classification : Hastelloy Alloy
Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60
Standard
BS4449,JIS,ASTM/A615
Length
6m,12m
Application
Widely used in construction industry for reinforcing concrete(Express way; office building, Bridge etc) Transportation By sea(20' 40' container)
Our stainless steel bright square bars are produced using cold drawing and polishing processes, resulting in enhanced mechanical properties, precise dimensional accuracy, and a flawless surface finish. These bars are centerless ground and free from surface defects, making them ideal for industries requiring perfection in every detail. With exceptional strength, durability, and uniformity, our square bright bars are perfect for construction, engineering, and precision applications. Available in various grades and sizes, they meet the highest industry standards, providing unmatched performance and reliability for your critical projects.
Size Range 6mm upto 60mm
Size Range (Inch) 5/16 to 2 1/4
All grades of Austenitic, Ferritic, Martensitic, Duplex & Super Duplex and High Alloys.
59055 630 Duplex Stainless Steel Bar Suppliers
Short on time? Let 630 Duplex Stainless Steel Bar sellers contact you.
