Application of polished anodized aluminum mirror sheet (1) Polished Mirror Aluminium Sheets' Applications: lighting, grille lamps, indoor building decoration, household appliances, nameplate, signs, reflector sheet, etc (2) Anodized Aluminum Mirror Sheet's is widely used in below fileds: lighitng, solar reflector sheet, lighting reflector, external decoration, outdoor building , solar panel, wall panel, etc (3) Mirror Cladding Aluminum Sheet is widly used in below fields: lighitng, solar reflector sheet, lighting reflector, external decoration, building material , wall panel, et
Introduction: 3-Bar aluminum checker sheet/coil is our advantage products. Alloys we apply have 1xxx series, 3xxx series, 5xxx series, 6xxx series. High goods quality makes our aluminum checker sheet highly favored in both domestic and foreign market. Alloy Series 1 series 3 series 5 series 6 series Typical Alloy 1050 1060 1100 3003 3105 5052 5754 6061 6063 6082 Temper O H12 H22 H14 H24 H114 H194 F etc Embossed Pattern Three Bars Thickness(mm) 1.0-7.0 Width(mm) 50-1800 Length(mm) 500-16000, Coil Chemical Composition of 1/3/5/6 Series Aluminum Alloy Si Fe Cu Mn Mg Cr Zn Ti Other Al Single Total 1050 0.25 0.40 0.05 0.05 0.05 -- 0.05 0.03 0.05 0.15 99.50 min 1060 0.25 0.35 0.05 0.03 0.03 0.05 0.03 0.05 0.15 99.60 min 1100 0.95 0.05-0.20 0.05 -- -- 0.10 -- 0.05 0.15 99.0min 3003 0.6 0.7 0.05~0.20 1.0~1.5 -- -- 0.1 -- 0.05 0.15 Remainder 3105 0.6 0.7 0.30 0.30-0.8 0.20-0.8 0.20 0.40 0.10 0.05 0.15 Remainder 5052 0.25 0.40 0.10 0.10 2.2-2.8 0.15-0.35 0.10 -- 0.05 0.15 Remainder 5754 0.40 0.40 0.10 0.50 2.6-3.6 0.30 0.20 0.15 0.05 0.15 Remainder 6061 0.4-0.8 0.7 0.15-0.40 0.15 0.8-1.2 0.04-0.35 0.25 0.15 0.05 0.15 Remainder 6063 0.20-0.6 0.35 0.10 0.10 0.45-0.9 0.10 0.10 0.1 0.05 0.15 Remainder Aluminum Checker Sheet Advantages 1. accurate size, good anti-slip effect,wide range of applications 2. strong plasticity, easy forming and excellent processing performance. 3. Embossed aluminum sheet can form a dense and strong oxide film on aluminum surface to prevent the intrusion of oxygen, so it has good corrosion resistance. 4. Good elongation and tensile strength, fully able to meet the normal processing requirements (stamping, stretching), high formability 5. The surface quality of aluminum checker plate is good, no oil spots, waves, scratches, roller marks, neat trimming, no burrs. Applications: 3-Bar aluminum checker plate is widely applied in transportation, construction, decoration, floor around the equipment, machinery, ship-building and other fields.
Product Details Type: Aluminium Chequered Plate for Flooring Alloy/Grade: AA1060 1050 1100 3003 Temper/Hardness: O, H14, H16, H18, H24, H26 MOQ: 6MT for each size Technique: Cold Rolling Thickness (mm): 0.28-6.00mm Width (mm): 800-2000mm Length (mm): 800-8000mm Inner Diameter: 505mm,605mm(Dimensions can be produced according to clients' requirement.) Trade Terms: FOB or CIF or CNF Delivery Time: Within 8 Days Application: Construction Materials, Home Appliances, Transportation, Signs, Electronic Products, Automobile Parts, etc. Package: Standard seaworthy exporting carton, Wooden pallets ,waterproof paper and plastic coverage or as per customer's requirement. Additional Item Customized service is available (Size,Alloy,Temper,Packing&Pallet Weight) Application of Aluminium Chequered Plate 1. Construction , decoration 2. Packaging, printing, cover material, 3. Piping, electronic elements, referigeration, air conditioner, automobile, and so on. Building Applications - Pre-painted sheet, Anodised sheet, Roofing Coil, Patterned sheet ( 5 Bar Tread plate and Propeller Plate) Road signage - Mill Finish and Linished 1.60 and 2.00 5052 H38 grade aluminium from leading manufacturers of aluminium sheet for use in the road sign industry. ALSPEC also carries complementary extrusions to suit.
Product Details: Product Name top quality aircraft grade aluminum plate 6061 t6 prices per kg Standard GB/T3190-2008, GB/T3880-2012, ASTM B209, ENAW, etc Alloy No. 6061 6063 6062 6082, 7075, 7005, 7050, etc Temper O H112 T4 T6 T651 Thickness 0.3-200 mm Width 20-2650mm Length max.16000mm, customized MOQ 6 Ton Payment Terms T/T L/C at sight D/P Delivery Time around 30 days Packing Standard seaworthy export wooden pallets Chemical Composition Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Ga V other Min Al/ % 6061 0.4-0.8 0.7 0.15-0.4 0.15 0.8-1.2 0.04-0.35 - 0.25 0.15 - - 0.15 Remainder 6082 0.7-1.3 0.5 0.1 0.4-1.0 0.6-1.2 0.25 - 0.2 0.1 - - 0.15 Remainder Application 6061 aluminum plate is one of the advantages of Zhongxin Aluminum. The processing technology is superb. The aluminum plate has many advantages such as good oxidation effect, small deformation after processing, uniform quenching, etc. In the fields of mobile phone case, automobile wheel hub, trolley case, 3C product, etc. Zhongxin Aluminum can produce 6061-t6 aluminum plate, pre-stretched 6061-t651 aluminum alloy plate, 6061 super flat plate, 6061 hardened plate and other aluminum plates.
Introduction: 2-Bar aluminum checker sheet/coil is one of our advantage products. Alloys we commonly apply are 1xxx series, 3xxx series, 5xxx series, 6xxx series. High goods quality makes our aluminum checker plate highly favored in both domestic and foreign market. Alloy Series 1 series 3 series 5 series 6 series Typical Alloy 1050 1060 1100 3003 3105 5052 5754 6061 6063 6082 Temper O H12 H22 H14 H24 H114 H194 F etc Embossed Pattern Two Bars Thickness(mm) 1.0-7.0 Width(mm) 50-1800 Length(mm) 500-16000, Coil Chemical Composition of 1/3/5/6 Series Aluminum Alloy Si Fe Cu Mn Mg Cr Zn Ti Other Al Single Total 1050 0.25 0.40 0.05 0.05 0.05 -- 0.05 0.03 0.05 0.15 99.50 min 1060 0.25 0.35 0.05 0.03 0.03 0.05 0.03 0.05 0.15 99.60 min 1100 0.95 0.05-0.20 0.05 -- -- 0.10 -- 0.05 0.15 99.0min 3003 0.6 0.7 0.05~0.20 1.0~1.5 -- -- 0.1 -- 0.05 0.15 Remainder 3105 0.6 0.7 0.30 0.30-0.8 0.20-0.8 0.20 0.40 0.10 0.05 0.15 Remainder 5052 0.25 0.40 0.10 0.10 2.2-2.8 0.15-0.35 0.10 -- 0.05 0.15 Remainder 5754 0.40 0.40 0.10 0.50 2.6-3.6 0.30 0.20 0.15 0.05 0.15 Remainder Applications: For its lightweight, beautiful appearance, as well as good anti-correction, color coated aluminum Sheet and Coil are vastly used in construction for decoration, trasportation, household appliance, elastic cap stock etc.
Introduction: Hammered aluminum sheet, also called pebble embossed aluminum sheet, is one of our advantage products. Alloys we commonly apply are 1xxx series, 3xxx series, 5xxx series. High goods quality makes hammered aluminum highly favored in both domestic and favor market. Alloy Series 1xxx series 3xxx series 5xxx series Typical Alloy 1050 1060 1070 1100 1200 3003 3105 3103 3005 5005 5052 5754 Temper O H12 H22 H14 H24 H16 H18 H32 H34 H36 etc Surface Types Mirror finish hammered & plain hammered Embossed Pattern Hammer tone, pebble Thickness(mm) 0.1-1.5 Width(mm) Max.1500 Length(mm) Max.12000, Coil Chemical Composition of 1/3/5/6 Series Aluminum Alloy Si Fe Cu Mn Mg Cr Zn Ti Other Al Single Total 1050 0.25 0.40 0.05 0.05 0.05 -- 0.05 0.03 0.05 0.15 99.50 min 1060 0.25 0.35 0.05 0.03 0.03 0.05 0.03 0.05 0.15 99.60 min 1100 0.95 0.05-0.20 0.05 -- -- 0.10 -- 0.05 0.15 99.0min 3003 0.6 0.7 0.05~0.20 1.0~1.5 -- -- 0.1 -- 0.05 0.15 Remainder 3105 0.6 0.7 0.30 0.30-0.8 0.20-0.8 0.20 0.40 0.10 0.05 0.15 Remainder 5052 0.25 0.40 0.10 0.10 2.2-2.8 0.15-0.35 0.10 -- 0.05 0.15 Remainder 5754 0.40 0.40 0.10 0.50 2.6-3.6 0.30 0.20 0.15 0.05 0.15 Remainder Applications: Hammered aluminum sheet is widely used for decorative lighting, solar reflector, architectural appearance, interior decoration: ceiling, wall panels, furniture, cabinet, nameplate, luggage, automobile decoration, household appliances, freezer, microwave oven, sound equipment etc.
1050 aluminum sheet belongs to commercially pure wrought family with a purity of 99.5% Aluminum. Except Al, 0.4% of Fe is added to 1050 aluminum sheet/coil, thus, it has high electrical conductivity. 1000 series aluminum group offers the best correction resistance compared to any alloy group, so does the 1050 aluminum sheet/coil. Zhongxin can manufacture and supply high quality 1050 aluminum sheet/coil with 18 years experience. Besides, different tempers are available, such as O (annealed), H12, H14, H18, etc.
Introduction: Aluminum checker plate, also called aluminum tread plate, is our advantage products. Alloys we apply have 1xxx series, 3xxx series, 5xxx series, 6xxx series. High goods quality makes our aluminum checker plate highly favored in both domestic and foreign market. Alloy Series 1 series 3 series 5 series 6 series Typical Alloy 1050 1060 1100 3003 3105 5052 5754 5083 5086 6061 6063 6082 Temper O H12 H22 H14 H24 H114 H194 F etc Surface Types mirror finish 5 bar, plain 5 bar Embossed Pattern small 5 bar, big 5 bar Thickness(mm) 1.0-8.0 Width(mm) 50-2100 Length(mm) 500-16000, Coil Chemical Composition of 1/3/5/6 Series Aluminum Alloy Si Fe Cu Mn Mg Cr Zn Ti Other Al Single Total 1050 0.25 0.40 0.05 0.05 0.05 -- 0.05 0.03 0.05 0.15 99.50 min 1060 0.25 0.35 0.05 0.03 0.03 0.05 0.03 0.05 0.15 99.60 min 1100 0.95 0.05-0.20 0.05 -- -- 0.10 -- 0.05 0.15 99.0min 3003 0.6 0.7 0.05~0.20 1.0~1.5 -- -- 0.1 -- 0.05 0.15 Remainder 3105 0.6 0.7 0.30 0.30-0.8 0.20-0.8 0.20 0.40 0.10 0.05 0.15 Remainder 5052 0.25 0.40 0.10 0.10 2.2-2.8 0.15-0.35 0.10 -- 0.05 0.15 Remainder 5754 0.40 0.40 0.10 0.50 2.6-3.6 0.30 0.20 0.15 0.05 0.15 Remainder 6061 0.4-0.8 0.7 0.15-0.40 0.15 0.8-1.2 0.04-0.35 0.25 0.15 0.05 0.15 Remainder 6063 0.20-0.6 0.35 0.10 0.10 0.45-0.9 0.10 0.10 0.1 0.05 0.15 Remainder Applications: Aluminum Checker Sheet is a high-cost modern materials, there are many types of furniture in a wide range of uses, such as refrigerators, air conditioners, cars, platforms, packaging pipes, screen skeleton, a variety of hanging beams, table legs, Handle, cable trough and cover, chair, and so on.
Good deep drawing aluminium circle /disc/disk A1050 1060 1100 3003 All chemical compostion ,mechanical property ,size tolerance ,flat tolerance etcStrictly as per ASTM OR EN standard . Width: 20-1200mm Application: Cookware ,Kitchen Utensils ,Road Sign etc Size can be produced as per clients requirement
Brand Zhongxin Alloy number 1050,1060,1070,1100,1235, 3003,3004,3102, 5005,5052,5754,5083 6061 8011 Temper O H18 H22 H24 H26 H32 H112 Diameter 100mm-1000mm Thickness 0.5-6mm Quality control ISO9001 SGS QC Qualified tensile strength and elongation Packing Seaworthy wooden package with paper interleave,film before wooden package. Payment 100% irrevocable L/C at sight or 30% T/T in advance as deposit and 70% in balance Delivery time 20days after receipt of advance deposit Applications: CC Treatment quality Recessed lighting High bay industrial lighting Stress lighting Traffic light reflectors Sports lighting. DC Treatment quality Restaurant cookware, Rice cooker, Pressure cooker, Pan, Bakeware, Bread Makers, Road sign, Traffic sign, Auto parts, Appliance
Product Aluminum Plate Property Anti-Corrosion,Heat Resistant Surface Mill Finish Production Process Cold Rolled,Hot Rolled Temper O,H14,H24,H32,H112 Etc;T4,T651 Etc Thickness 0.3mm - 300mm Width 100mm - 2600mm Length 1000mm - 12000mm MOQ 7 tons(According to specifications) Payment Term TT,LC at sight,WestUnion,KunLun Bank Package Export wooden pallets,Craft paper,Anti-Blushing Agent. Delivery Time Future goods:20-30 Work days,Ready Stock:7-10 days. Quality of Material Totally free from defects like white rust,adge damage,camber,dents,holes,break lines,scratches . Kind Attention Specification can be custommized as the customer's requirements.
We can produce the thickness from 0.03mm to 3.0mm, the width from 30mm to 1800mm, the paint including PE/PVDF/HDPE/EPOXY. The Alloy No. is 1000 series, 3000 series 5000 series and 8000 series . All the series can accept OEM and ODM, they are widely used in construction, decoration, packing and advertisement areas. Product name Alloy 3105 Color Coating Aluminum Coil for Advertisement areas Thickness 0.2-5.0mm Width 8-1850mm Diameter Standard dia:1200mm/Interior dia: 150mm,405mm, 500mm, 505mm, 510mm/outer diameter: 1200mm Weight 2.5 T/coil,3.0 T/coil Coating thickness PE:>=16 micron , PVDF:>=25 micron Protective film As per customers request Coating paint PVDF, PE(Polyester), epoxy, polyamide, polyurethane Color RAL color or by customer requirements. Surface Embossed, mill finish, coated, mirror finish Gloss 10-100% Coating Hardness (pencil resistance) More than 2h Coating adhesion 1J Impact Resistance No peeling or cracking(50 kg/cm) Properties of Customized Color Coating Aluminum Sheet/Coil CHEMICAL COMPOSITION ALLOY Si Fe Cu Mn Mg Cr Ni Zn Ti AI 1050 0.25 0.40 0.05 0.05 0.05 / / 0.05 / 99.50 1060 0.25 0.35 0.05 0.03 0.03 / / 0.05 / 99.60 1070 0.20 0.25 0.04 0.03 0.03 / / 0.04 / 99.70 1100 Si+Fe:0.95 0.05-.020 0.05 / / 0.10 / / 99.00 1200 Si+Fe:1.0 0.05 0.05 / / / 0.10 / 99.00 3003 0.60 0.70 0.05-0.20 1.00-1.50 / / / 0.10 / Remainder 3105 0.60 0.70 0.30 0.30-0.80 0.20-0.80 0.20 / 0.40 0.10 Remainder 8011 0.50-0.9 0.6-1.0 0.10 0.20 0.05 0.05 / 0.10 0.08 Remainder Feature For its lightweight, beautiful appearance, as well as good anti-correction, color coated aluminum Sheet and Coil are vastly used in construction for decoration, trasportation, household appliance, elastic cap stock etc. More information pls visit our website: https://zxalu.com
Aluminium Ingots are sourced from South Africa
Priority International Co. W.L.L, full member of BIR (compliance to ISRI Standards), our reputation is one of excellence with our field and well respected within the recycling community & oil field throughout the Far East, North America, Europe, The middle east & the Indian Sun-Continental. Yearly we handled in excess of more than 40000 tones of ferrous Scrap, 15000Tonnes of non-ferrous Scrap, 30000Tonnes over the last five years of spent catalysts & Bulk cargo shipment of petrochemicals commodities. We are ready to supply all kinds of copper scrap such as Millberry copper scrap, Berry copper scrap, Birch copper scrap and more on regular basis. We are ready to offer the best prices for quality scraps. You are free to visit our yard to inspect the quality and grade of these scrap materials before purchasing. Genuine copper scrap buyers contact us immediately.
We have a regular stock of tons of all kinds of aluminium and brass scrap in our yard. We can supply any quantity of scrap materials on a regular basis. Shipment and packaging will be made based on your request. Details are given below for weekly shipments: 1. 2x20FT Cont. 48MT(+/-10%) Brass Honey / Zinc Die Cast (Each Cont. 20MT Honey & 4MT Zinc) 2. 2x40FT Cont. 40MT(+/-10%) Alum Trump with 5% FE Loose, Clean 3. 2x40FT Cont. 40MT(+/-10%) Alum Tense, max 5% FE 4. 4x40FT Cont. 72MT(+/-10%) Alum Ext 6063 Loose, Clean 5. 1x40FT Cont. 18MT(+/-10%) Alum 6061 6. 1x20FT Cont. 20MT(+/-10%) Alum Litho Sheet, loose 7. 1x20FT Cont. 20MT(+/-10%) Alum Pure Radiator 8. 2x20FT Cont. 40MT(+/-10%) Alum Taint Tabor 9. 2x40FT Cont. 36MT(+/-10%) Alum Talk Fe 10. 2x40FT Cont. 50MT(+/-10%) Alum UBC 11. 2x40FT Cont. 42MT(+/-10%) Alum Telic 6063, clean, packed into small bags 12. 2x40FT Cont. 40MT(+/-10%) S. Steel 304 Loose
IN ALL COLORS 0.3 MM TO 0.7 MM WIDTH : 1000-1250 1500 MM
ZINC 40 TO ZINC 275 THICKNESS : 0.3 MM TO 3.75 MM WIDTH : 1000 - 1250 -1500
WIDTH : 1000 - 1250 -1500 THICKNESS : 0.8 TO 20 MM
8 mm to 32 mm GRADE : B500B GRADE 40 GRADE 60
3sp 4sp 5sp
