One of the most time consuming part of mattress production is flanging the quilted panel.
With the higher demand on thicker mattress panels, overlocking of the panels became inevitable, because it becomes impossible to sew the thick panel by the tape edging. However, the conventional flanging process brings a lot of labor and inaccurate end sizes of the panel.
Full automatic process
Two Working Modes: Synchronized with your existing quilting machine
Feeding the roll of quilt
Side and Length Cutting and Sewing
4 needle double chain-stitch heavy duty sewing unit (right and left sew ing head)
4 needle double chain-stitch heavy duty sewing unit (cross sewing head)
Adjustable width and length of the quilt
Adjustable distance between left and right head with motor
Wide range of quilt thicknesses
Material exit with conveyor
Automatic thread cutting
Accurate finishe measures of the quilts
Automatic side-waste removal system to the reserve
High safety systems
Servo driven system
User-friendly software
Easy tape edging of the quilt after closing
Online maintenance and training service
One HEMMER has the capacity of 5 flangers.
There is no panel cutter needed
The finish size of panel after flanging may end up with high tolerances while it is always accurate with the HEMMER
Ability to use as panel cutter only
Unlike conventional panel cutters; with the new HEMMER, there is no possibility of skipped stitches at the cutting edge, since the hemming is before the cutting
Your tape edging is more fluffy with the HEMMER. The overlocking completely closes the edge of the material while hemming keeps your panel edge open to make the tape fluffy
Ability to adapt the HEMMER with any existing multineedle quilter.
High quality chainstitch sewing heads
Max. Speed: 20-22 seconds per panel (may change according to the filling)
Max. Material thickness: 7.5 cm (may change according to the compressibility of the material)
Number of sewing heads: 3
Max. Quilt width: 2.50 m
Min. Quilt width: 1.40 m
Min. Quilt length: 75 cm
Automatic thread cutting
Automatic side waste removal system
Full automatic process with 4 sides cutting and hemming
4 needle chain-stitch sewing head for the transversal cutting and sewing
Ability to adapt any multineedle quilter
Ability to work with pre-quilted material
Ability to set up timing of the looper-needle adjustment without any mechanical setting
Reliable OMRON Sysmac Controller
Ability to use as panel cutter only
Durable FESTO pneumatic system with low air consumption
Product video link : https://www.youtube.com/watch?v=aD9dB_5UONA
Product video link : https://www.youtube.com/watch?v=KaPEo4Dl2U4
Product Description
Double beam box type two trolley gantry crane
Double beam box type two trolley gantry crane is applied outside warehouse or railway sideways to do common lifting and unloading works, Double beam box type two trolley gantry crane is composed of bridge, support legs, crane traveling organ, trolley, electric equipment, strong lifting winch, the frame adopts box-type welding mechanism, crane traveling mechanisms are operated in the driver cabin or remote control, Power is supplied by cable or slide wire, there are different capacity double beams gantry crane for your choice according to your different use.
Electrical and Control Equipment
Double beam box type two trolley gantry crane that we are offering is designed to meet the required functions and requirement stated in your specifications, as well as for the operating conditions.
Packing & Delivery
Packing:
1. Electric parts are packed by high quality plywood crate, to reduce distortion in conveying;
2. Main beams, end beams and electric hoist are packed by plastic woven cloth. It can reduce abrasion when transport.
Delivery:
1. If the size of whole Double beam box type two trolley gantry crane are suitable for container ship, usually by container;
2. If the size is too big, usually by bulk ship or by container after truncation;
3. Transport ways are based on reducing cost for you and keep the crane performance!
FAQ
1. What's the information should I provide when inquiry?
a: Lift capacity. b: Lift height. c: Span. d: Power source. e:Working environment.
More details, better. If you have the drawing will be very better.
2. Operating methods for selection?
A: Pendent controller with push buttons.
B: Remote control with push buttons.
C: Cabin control with joystick.
3. Can you provide the various lifting tools?
Sure, we can provide any tools other specials you need, please tell us it when enquiry.
4. How to install the Double beam box type two trolley gantry crane?
Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country.
5. Safety device
Overload limiter, Limit Switch (lifting and traveling), Interlock protection device, Buffer, Overhaul cage, Rail clear plate, Protective cover, Bus bar preventer plate, Anticollision device, Main isolating switch, Emergency stop system, Motor overload protection, and so on.
Highway bridge hanging basket form traveller
Form Traveler is used Balance Cantilever Construction Method. Highway bridge hanging basket form traveller is easier to be use compare to Under Slung Model. And it is easier to be modified for future usage. Our Highway bridge hanging basket form traveller are with good quality modular connection, designed for future modification and repeated usage for many years. We supply good quality metal formwork. We also provide plywood formwork system as it is a more economical solution.
Concreting Support, self-launching operation, level adjustments are all by means of hydraulic system. Erection of the Highway bridge hanging basket form traveller on the pier top can be as short as 1 week. All major parts join together by pin connection, which promises speedy erection and high accuracy design.
Our Company
Henan Shenghua Heavy Crane Group is a big enterprise specialized in researching, developing, producing and exporting.
It mainly produces overhead crane and gantry crane, beam launcher, movable scaffolding system crane, Highway bridge hanging basket form traveller, straddle carrier, tyre transportor, beam trolley, portal crane and electric winch, electric hoist and all kinds of accessories, which widly cover machinery, metallurgy, electric power, railway, water conservancy, ports, terminals and other industries.
Shenghua Heavy Crane Group have more than 600 staff, and covers 200,000 square meters.
Our advantages:
A. More than 50 R&D personnel with advanced Science and technology.
B. More than 400 sets advanced Production processing equipment and inspection equipment.
C. Independent intellectual property rights to develop energy saving bridge cranes, gantry cranes, and electric hoist.
D. Obtain ISO 9001 certificate and more than 10 series of patent certificates.
E. Efficient service and competitive products.
F. Export more than 100 countries.
Packing & Delivery
Packing
1. Hydraulic parts are packed by high quality plywood crate to reduce distortion.
2. Structure are packed by plastic woven cloth to reduce abrasion during transporting.
Delivery
1. If the size of Highway bridge hanging basket form traveller are suitable for container ship, usually by container.
2. If the size is too big, usually by bulk ship or by container after disassembly.
3. Transport ways are based on reducing cost and keep the Highway bridge hanging basket form traveller performance.
Delivery time
Could be delivered within 30 to 40 days after the receipt of deposit.
Transportation
Generally 35 days to 50 days to destination port.
animal salt mineral licking block press machine technical characteristics
1, using advanced PLC hydraulic transmission technology, high technology, low failure rate, high degree of automation, high efficiency.
2, the host structure is compact, small footprint, easy to move and transport.
3, four-oriented structure, molding pressure, high density of pressed products, not broken.
4, hydraulic pump station structure design is reasonable, highly concentrated hydraulic control valve block and a unique design of the hydraulic system to make the hydraulic system perfect, and effectively achieve the continuity of normal production.
5, replace the mold can live Participation in various specifications of the salt block, weighing up to 2kg ~ 25kg, to achieve the product diversification needs and reduce investment costs.
6, the electrical control program to achieve a human-computer interaction, simple operation, convenient and quick.
7, low failure rate, heat a small, high efficiency, energy saving and durable.
high efficiency animal salt mineral licking block press machine for livestock
high efficiency animal salt mineral licking block press machine for livestock
high efficiency animal salt mineral licking block press machine for livestock
features
1, the host rack with cast steel structure, good rigidity, high strength, will not be deformed, extending the service life of salt block press machine for livestock.
2, in the middle of the mold according to the needs of users removable , with different molds can produce different size specifications of the product, to achieve the product diversification requirements.
3, hydraulic pump station structure design is reasonable, the hydraulic valve centralized device and the optimal design of the hydraulic system makes the hydraulic system perfect, improve the performance of the equipment.
4, the perfect hydraulic system to ensure that the equipment can withstand greater load, long-term trouble-free production, improve work efficiency.
5, the configuration of the cooler to ensure that the salt mineral licking block press machine will not affect the hydraulic system due to overheating oil production failure.
6, electrical control cabinet technology to improve the use of advanced display text controller to facilitate user control, and low failure rate.
Packaging & Shipping
Hipped geomembrane for landfill closures waterproof liner 0.1mm-3mm/m2
1. Geomembrane specifications
1) Thickness : 0.15mm - 4.0mm.
2) Width : Within 8 m (1m-8m).
3) Length : 50m-100m/roll (as request).
4) Material : HDPE,( LDPE, LLDPE, PVC, EVA ).
5) Color : Black , white , red , blue , or as required.
6) Optional surface : Textued(one or two side) or smooth surface.
7) Certificate:CE/ISO9001,14001
2. HDPE geomenbrane Features
Good mechanical properties, high tear strength, deformation and adaptable, puncture resistance, anti-aging, anti-ultraviolet-resistant, Anti oil and salt, pH, anti-corrosion, high temperature-resistant, non-toxic, long service life. water, drainage, seepage, the good effect of moisture, width, thickness of the full range of specifications and low cost, simple construction.
3. HDPE Geomembrane Applications
1) Environmental protection, sanitation (such as solid waste landfills, sewage treatment plants, power plants Chi-conditioning, industrial, hospital solid waste, etc.) .
2) Water (such as rivers, lakes and reservoirs of the anti-dam, plugging, reinforcement of the canal seepage, the vertical wall of the heart, slope protection, etc.).
3) Municipal Engineering (subway, on the ground floor of the building, planted roof, the roof garden of anti-seepage, sewage pipes lining, etc.).
4) Landscape (man-made lake, river, reservoir, golf courses reservoirs of the substrate, slope protection, green lawn of the waterproof moisture, etc.).
5) Petrochemical (chemical plants, oil refineries, gas storage tanks of the anti-chemical reaction tanks, sedimentation tanks of the lining, etc.).
6) Mining (washing and pool heap leaching, the ash-field, dissolved, precipitation, the yard, the tailings seepage substrates, etc.)
HDPE geomembrane
NO. Items Value
Common Environment
1 Thickness (mm) 0.2 - 4
2 Width (m) 2.5 - 8
3 Tensile Strength(TD/MD) MPa ?7 ?¥25
4 Elongation at Break(TD/MD) % ?¥4550
5 Strength at Tear(Right-angle Tear) N/m?110
6 Carbon black content % 2.0 - 3.0 2.0 - 3.0
7 Anti-crack F20 ,1500
8 -70low temperature impact brittle prope pass
9 Oxidative Inducement Time at 200°C,m20
LDPE geomembrane
NO. Items Value
1. Thickness (mm) 0.2 - 3
2. Width (m) 2.5 - 9
3. Tensile Strength(TD/MD)MPa14
4. Elongation at Break (TD/MD) 400
5. Strength at Tear(Right-angle Tear)N/m50
6. Permeability coefficient of Vapour(g.cm/cm2.s.p)
299906 Internet Intranet Services Suppliers
Short on time? Let Internet Intranet Services sellers contact you.
DoingGroup's pyrolysis plant for waste plastic recycling is the process of pyrolyzing waste plastic into fuel oil, carbon black and non-condensable gas under the condition of anaerobic environment and utilizing the chemical reaction of pyrolysis.
DoingGroup's main operating temperature pyrolysis plant:
1. Use mechanical waste plastic to enter the reactor and close the inlet to prevent gas flow out.
2. Carbon, wood or fuel heating reactor, the reactor is generally 200-300 degrees began cracking reaction, when the waste tires vaporized into oil vapor.
3. Hydrocarbons entering the condensing system are liquefied into oil and collected in the tank unit. Our system has a negative pressure device, he can greatly improve the production of pyrolysis oil.
4. At atmospheric pressure can not be liquefied petroleum gas as fuel for combustion returned to the reactor, not only energy saving and environmental protection,
5. After the oil production is completed, the reactor will be cooled. When the temperature drops to 40 degrees, the carbon black will be removed automatically or manually.
The main advantages of this pyrolysis plant for waste plastic recycling
are as follows:
1. Reactor manufactured according to the standard, using 16mm thick boiler steel pipe and arc pressure head, can withstand high pressure and high temperature.
2 high standard 3-step welding process, not easy to crack, long service life.
3. Pinion rotation device, small power, no direct contact with the reactor, heat transfer less easily deformed.
4. The tertiary cooling system uses a tube condenser, also known as a heat exchanger, which is currently the most commonly used and best performing condenser in the oil industry. Can ensure that the cracked oil and gas fully cooled, high oil production.
5 safety device oil-water separator, water seal, vacuum device, to ensure the safe and efficient operation of equipment.
The most commonly available fuel, carbon black, and non-condensable gases from the operating equipment are as follows:
1. Fuel oil : Mainly used in steel mills, boiler heating, heavy oil generating units, cement plants
2 carbon black: can be used for high-pressure ball combustion can also be used for refined toner. Refined carbon powder for new tires, rubber soles and pigments.
3. Non-condensable gas: The non-condensable gas generated during equipment operation is a combustible gas, which is generally recovered by the system and reused for heating the fuel in the reactor.
The advent of cars has greatly promoted the development of society and improved the quality of our life. But on the other hand, the waste tires produced by automobiles pose a huge threat to our living environment. DoingGroup has developed a waste tire pyrolysis plant, the pyrolysis plant is the use of high temperature cracking chemical reactions, the waste tires cracked into fuel, carbon black, steel wire, combustible gas process.
The main workflow of the tire pyrolysis plant is as follows:
1. Use mechanical waste tires to enter the reactor and close the inlet to prevent gas flow out.
2. Carbon, wood or fuel heating reactor, the reactor is generally 200-300 degrees is the beginning of the cracking reaction, when the waste tires vaporized into oil vapor.
3. The hydrocarbons entering the condensing system are liquefied into oil and collected in the tank unit. Our system has a negative pressure device, he can greatly enhance the production of pyrolysis oil.
4.Liquefied petroleum gas that can not be liquefied under atmospheric pressure is returned to the reactor as fuel for combustion, which is not only energy saving and environmental protection.
5. After the completion of oil production, the reactor will be cooled. When the temperature drops to 40 degrees, the carbon black and wires will be removed automatically or manually.
The main advantages of waste tire pyrolysis plant are as follows:
1. Reactor press standard manufacturing, the use of 16mm thick boiler steel pipe and arc pressure head, can withstand high pressure and high temperature.
2 high standard 3-step welding process, not easy to crack, long service life.
3. Pinion rotation device, small power, does not directly contact the reactor, heat transfer less easily deformed.
4. The three-stage cooling system uses tube condensers, also known as heat exchangers, which are currently the most commonly used and best performing condensers in the oil industry. Can ensure that the cracked oil and gas fully cooled, high oil production.
5 safety device oil-water separator, water seal, vacuum device, to ensure the safe and efficient operation of equipment.
The final product cracked by the waste tire cracker has a wide range of uses, mainly as follows:
1. Fuel: Mainly used in steel mills, boiler heating, heavy oil generating units, cement plants and so on
2 carbon black: can be used for pressure ball burning, can also be used for refined toner. Refined toner for new tires, rubber soles and pigments.
3. Steel wire: can scrap recycling, can also be re-cast into other steel.
4. Combustible gas: the system was re-collected for reactor heating.
With the improvement of living standards, the car has become one of the essential means of transport for people traveling. On the one hand, it brings great convenience to our life. On the other hand, the waste tires on the car also pose a great threat to our living environment. In response to this serious social problem, DoingGroup uses pyrolysis principle to crack waste tires into fuel oil, carbon black, steel wire and combustible gas. Waste tire pyrolysis equipment by people from all walks of life at home and abroad more and more attention and praise.
Our waste tire pyrolysis is so popular because it has the following advantages:
1. Our pyrolysis reactor is made according to the pressure vessel production standards, using 16mm thick boiler special steel and arc compression head, can withstand high pressure and high temperature.
2. High-standard 3-step welding process, not easy to crack, long service life.
3. Pinion rotation device, power is small, not directly contact the reactor, less heat transfer, not easy to deformation.
4. The three-stage cooling system uses tube condensation, also known as a heat exchanger, and is currently the most commonly used and best performing condenser in the oil industry. Can ensure that the cracked oil and gas fully cooled, high oil yield.
5. Our equipment has the following safety devices: water separator, water seal, vacuum device. They can prevent oil and gas from flowing backwards
Pyrolysis, also known as pyrolysis, pyrolysis, pyrolysis, pyrolysis, refers to the pyrolysis of organic matter in an oxygen-free environment, and is a chemical process that converts one sample to another. Waste tire pyrolysis equipment is the process of pyrolysis of waste tires into oil, non-condensable gases and carbon black and steel wire by heating at high temperatures.
The final product of waste tire cracker is fuel oil, carbon black, steel wire and combustible gas. These materials have a wide range of uses in our life and can be used in a variety of industries.
Fuel oil : Can be used in steel mills, cement plants, boiler heating, heavy oil generator combustion heating.
Carbon black: can be used for pressure ball burning, and refining flour. Which refined flour and can be used for new tires, rubber soles, pigments of raw materials.
Steel wire: Can be used for scrap recycling and re-casting.
Combustible gas: will be recycled back to the equipment for reactor heating.
Our equipment has different specifications, designed for each customer's different needs of different capacity, customers can choose according to their needs and budget. Any questions about the machine, please feel free to contact us.
The China HSHCL 1500 ton concrete bridge launcher crane hydraulic is used to construct prefabricated spans up to 60m long. It is designed and fabricated in order to ensure high performances, efficiency, safety, flexibility and multiple successive utilization.
Independent supports relocation system.
Independent stressing platform handling system.
Service overhead crane.
Radio remote controls for all operations.
Radio remote controlled spreader beam for segment positioning.
Safety Features
Safety is the most important issue for China HSHCL 1500 ton concrete bridge launcher crane hydraulic. To ensure the safety, the following safety devices are equipped in 1500 ton concrete bridge launcher crane hydraulic.
Crane traveling limit switch.
Overload protection device.
Lifting height limit device.
Voltage lower protection function .
Phase sequence protection function.
Emergency stop function.
Rain cover for outside hoist, driving units, electric cubicle.
Warning indicator : flashing nights and warning sounds.
Wire-less infra-detector for anti-collusion.
FAQ
1. Whatâ??s the information should I provide when inquiry about the China HSHCL 1500 ton concrete bridge launcher crane hydraulic?
we need the Bridge Drawing, the Maximum longitudinal slope and the Maximum Transverse slope.
The Girder/beam drawing.
2. How many kinds of construction methods for bridge launcher?
1. overhead segmental.
2. underslung segmental.
3. balanced cantilever erection segmental launching gantry.
4. full span.
3. What are inspection standard for load test of bridge launcher?
a. Dynamic load test
1.1 times rated load, main girder does not down deflection, all mechanisms work well, performance parameters meet the design demand, all limit switches and safety protection interlock devices are reliable, all spare parts does not have cracking and flexible connection, all motors and contactors are not overheat.
b. Static load test
1.25 times rated load, all mechanisms work well, the crane stops 20-30 min as trial load is lifted 10 cm high, then measure main girder down deflection(theodolite, ruler). Put down trial load to measure main girder upper camber, repeat 3 times, steel structure does not have permanent deformation;
4. How to make highway bridge concrete girders?
Highway Bridge concrete girders could be made by 4 methods:
Full span prefabrication.
Segment girder prefabrication.
Full span cast-in-place girder.
Segment cast-in-situ.
5.How about maintenance of bridge launcher?
a. Lubricating. b. Steel wire rope. c. Spreader. d. Pulley block. e. Wheels. f. Brake.
Johnson stainless steel Slot Continuous screen for sand control (customized):
Johnson Wedge wire screen also be named Vee-Wire screen pipe,Continuous slot Vee-wire screen tube,Water well screen, Wire wrapped screen,Wire wound screen,water filter, etc.
It is made up of Vee-shaped wrapped wire and round rod in each intersection,welded together.
Accurate slot and high filtration precision.
1.Inroduction:
The welded stainless steel water well screen is made up of support wire and filter wire. with the material of stainless steel 302,304,316,304L,316L.
2.Component:
The support wires can be round wires, triangular wires or trapezoidal wires, while the filter wires is triangular wires(V shape wires).
3.Characteristics:
precise aperture size, high filter precision,firm structure, high-temperature resistance, corrosion resistance and mechanical performance is good,long service life, safe and reliable, etc. Can be used in various media filtration and screening.
4.Specifications for your reference:
outside diameter Sewing Standard length Specifications of filter wire Specifications of support wire
4'' ,6'' ,8'',
10'',12''
and etc. 0.1-35mm 50-6000mm 2.2*3.0mm,
2.3*3.0mm,
3.0*4.6mm,
3.0*5.0mm 3.8mm/22pieces,
3.8mm/32pieces.
3.8mm/48pieces,
3.8mm/50pieces
5.Application of Wedged wire screen/Johnson screen pipe/Water Filter tube:
Separating , filtering;
Dewatering;
Classifying;
Straining , drying ;
Water intak;
6.Feature of Vee type Johnson slotted wire screen tube:
Non-clogging surface.
Large open area.
Low pressure drop.
Hydraulic efficiency.
High flow rates.
Mechanical strength.
Abrasion-resistant.
Easy cleaning.
8.Feature of Vee type Johnson slotted wire screen tube:
Non-clogging surface.
Large open area.
Low pressure drop.
Hydraulic efficiency.
High flow rates.
Mechanical strength.
Abrasion-resistant.
Easy cleaning.
9.Testing:
1.when raw materials arrive at our factory, we will inpsect the chemical component and then loaded into our warehouse.
2.our inspector will check during all the procedure.
3. before be packaged, our sales manager will inspect the goods with inspector again, approved ones will be labled and packaged.
4.we have person to inspect the loading into container to avoid damage during transportation.
For every different slot opening a new tooling is necessary. So continuous cylinders are only interesting for large quantities. For lower quantities a cylinder is more cost effective.
According to statistics, in 2013, the amount of waste tires produced in China was 10.18 million tons, and it is estimated that more than 20 million tons will be exceeded in 2020. Where is the growing number of used tires? In response to this social problem, DoingGroup used chemical cracking reactions, R & D out of waste tire cracking equipment. Our waste tire refining equipment, by more and more people's attention, every day from around the world to visit our factory visit our equipment, our equipment is so popular, is Because of its following advantages:
1. Reactor is produced according to the pressure vessel production standards, the use of 16mm thick boiler steel pipe and arc pressure head, can withstand high temperature and pressure.
2. High standard three-step welding process, not easy to rupture, long service life.
3. Pinion rotation device, small power, no direct contact with the reactor, heat transfer less easily deformed.
4. Three-stage cooling system with tube condenser, is the most commonly used in the oil industry, the best performance of the condenser. Make sure the fuel vapor is fully cooled and produces high volumes of oil.
5. Safety devices have oil-water separator, water seal, vacuum device. To ensure safe and stable operation of equipment.
Refinery equipment process:
1, First of all, the waste tires from the feed door into the host reactor, close the feed door, sealed. Heat the main furnace with fuel coal or wood in the heating chamber.
2, When the temperature reaches 220 , oil and gas precipitation, into the buffer chamber, residual oil (containing some slag) sink to the residue tank.
3,Light oil automatically enters the cooling system, condensed into oil.
4 Non-condensable gas, it will return to the reactor, as the heating reactor fuel.
After the above process, you can get fuel, carbon black, steel wire, combustible gas, which cracked the material from the waste tires has a wide range of uses:
1. Fuel oil can be used in steel mills, boiler heating, heavy oil power plants and cement plants to produce refined diesel for further processing and diesel generators, light fuels, heavy machinery.
2. Carbon black can be used for pressure ball burning, refined toner. Can be used for new tires, rubber soles, pigments made of refined toner.
3. Steel wire is mainly used for scrap recycling, and re-cast into other steel.
4. Combustible gas is mainly used for circulating heating reactor.
Outstanding highlights of our equipment is energy saving, low investment and high yield. Market prospects will be more and more broad, any machine problems, please contact us !!!
Plastic pyrolysis oil is the chemical technology that converts plastic waste into pyrolysis oil, carbon black and hydrocarbon gases. The reaction takes place inside the pyrolysis reactor. The following is the reaction of the specific process:
1. Use mechanical waste tires into the reactor, closing the entrance to prevent gas from flowing out.
2. Carbon, wood or fuel heating reactor, the reactor generally reach 200-300 degrees is the beginning of the cracking reaction, when the waste tires vaporized into oil vapor.
3. Oil and gas into the condensing system, liquefied into oil, was collected to the tank device. Our system has a negative pressure device, he can greatly improve the production of pyrolysis oil.
4. The liquefied petroleum gas that can not be liquefied under normal pressure will be returned to the reactor as fuel for combustion, which not only saves energy in environmental protection.
5. After completing the oil production, the reactor will be cooled. When the temperature drops to 40 degrees, the carbon black and wire will be removed automatically or manually.
This technology has not only solved a long time, a variety of difficult to degrade the pollution of the environment on the issue of pollution, and after pyrolysis of the new energy source can ease the energy crisis, has been widespread concern and praise from all sectors of society. But also because of its own advantages:
1. Standard pressure vessel, Q245R standard boiler plate steel, the thickness of 16mm.
2. Seamless welding process, not easy to crack, long service life.
3.360 degree omnidirectional insulation cover, thermal insulation effect is more prominent.
4. A negative pressure, water seal device to ensure safe and efficient operation of equipment. And negative pressure equipment can increase the oil rate.
5. Environment friendly, energy efficient. Our equipment has a special dust deodorant device that can achieve the waste liquid waste disposal, will not cause any harm to the environment.
These advantages make this device will have nearly 10,000 yuan a day income, the market prospects are very broad. Through this equipment cracking reaction and condensation system, will produce a large amount of fuel oil, carbon black, combustible gas. They are used in all walks of life.
Plastic products are widely used, everywhere plastic waste. There is a serious impact on our environment from both visual pollution and potential hazards. Visual pollution means the aesthetic perception of a living city that is affected by waste plastic everywhere. Potential hazards mainly refers to waste plastics resistant to degradation, affecting crop nutrient and water absorption, reduce production; otherwise, animals will be unconscious death. The recycling of waste plastics has increasingly become an important part of environmental protection. DoingGroup has developed a waste plastic processing equipment in addition to plastic waste. The device can also handle waste solid waste organic waste such as waste tires / waste rubber / waste acrylic / garbage / medical waste / oil shale, the operation of the device is as follows:
1. Use mechanical waste tires into the reactor, closing the entrance to prevent gas from flowing out.
2. Carbon, wood or fuel heating reactor, the reactor generally reach 200-300 degrees is the beginning of the cracking reaction, when the waste tires vaporized into oil vapor.
3. Oil and gas into the condensing system, liquefied into oil, was collected to the tank device. Our system has a negative pressure device, he can greatly improve the production of pyrolysis oil.
4. The Liquefied Petroleum Gas That Can Not Be Liquefied Under Normal Pressure Will Be Returned To The Reactor As Fuel For Combustion, Which Not Only Saves Energy In Environmental Protection.
5. After Completing The Oil Production, The Reactor Will Be Cooled. When The Temperature Drops To 40 Degrees, The Carbon Black And Wire Will Be Removed Automatically Or Manually.
The Device Is Not Only Able To Degrade The Plastic Waste In Life, Reduce Environmental Pollution, But Also Produce More Renewable Energy To Ease The Energy Crisis, More And More Because Of Its Own Advantages As Follows:
1. Reactor Is Made According To The Standard Of Pressure Production, Using 16mm Thick Boiler Special Steel And Arc Compression Head, Can Withstand High Pressure And High Temperature.
2. 2 High-standard 3-step Welding Process, Not Easy To Crack, Long Service Life.
3. Pinion Rotation Device, Power Is Small, Not Directly Contact The Reactor, Less Heat Transfer, Not Easy To Deformation.
4. The Three-stage Cooling System Uses Tube Condensation, Also Known As A Heat Exchanger, And Is Currently The Most Commonly Used And Best Performing Condenser In The Oil Industry. Can Ensure That The Cracked Oil And Gas Fully Cooled, High Oil Yield.
5. Safety device oil-water separator, water seal, vacuum device, to ensure safe and efficient operation of equipment.
Engraving speed : 0-30mm/min Laser Type :CO2 Industrial Laser machine
Laser Power(W) : 60-130 Brand Name : YueMing
Certification :CE,ISO,FDA After-sales service :Overseas office
Control system : Self-developed Smart Carver software and motion controller
Application : Laser engraving machine for jewelry
Working environment :Clean , Less dust; Temp:5-40â??ï¼? Humidity : 5-80%
Feature:
a. Support work time preview and interruptible engraving recovery after power-off
b. Support dynamic display of trajectory and coordinate points ,real-time work track display
c. Specially designed and configured power-driven lifting platform makes it easier for customer to hollow
and engrave materials with different thickness
d. Support Ethernet (10/100M) and USD2.0 transmission , the maximum speed is 12M, longest distance 5m.
High efficiency and no signal distorted in long distance transmission
e. Self-developed Smart Carver software and motion controller with high-speed motion interpolation
algorithm to achieve high speed and stable working .
f. Optional professional rotary device for engraving or cutting the cylindrical products such as laser engraving
machine for jewelry.
Packaging & Delivery
Packaging Details
Standard packing wooden case
Delivery Time
Shipped in 15 days after payment
Applicable Material :
Laser engraving machine for Jewelry and Non-metallic materials like wood , paper , leather , fabric ,fur, plastic , rubber and plexiglass etc
Company profile :
GD HANâ??S YUEMING LASER GROUP CO., LTD ,
A subsidiary of Hanâ??s Laser Technology Co., Ltd(stock code:002008),is as hi-tech enterprise focus on laser machine manufacturing and R&D since 2001.The product varies from laser cutting machine to laser marking machine manufacturer .Hanâ??s YueMing has been always sticks to its mottos â??win the market with advanced technology, reward customers with best serviceâ?? . So far , 78931 sets laser machines have been sold to more than 100 countries . scb2018ym
Strong holding force neodymium countersink magnet with screw hole
Neodymium magnet is also named NdFeB magnet,rare earth magnet or permanent magnet.it is kind of sintered magnet.Neodymium magnet is the strongest permanent magnet in the world so far,which belongs to the fouth generation magnet.Besides its powerful strength, it is very tractable,it can be machined into different shapes, sizes, or with countersink holes,or edge and corner processing. we can do custom magnet to meet your requirements.
Specifications:
Product:Countersink magnet
Grade:N33 N35 N38 N40 N42 N45 N48 N50 N52
Size:As per customer's request
Shape:round/disc,block,Cylinder,Bar,Ring,Countersunk,Segment,Ball,hook,Cup, Trapezoid,custom shape)
Surface Coating:Nickel, Zn, NiCuNi,Epoxy,Rubber,Gold,Sliver and so on
Tolerance:± 0.05mm
Magnetization Direction:Thickness/Axially/Diametrally/Multi-poles/Radial Magnetized
Working Temperature: 80°C (176°F)--220°C (428°F)
Sample: Available
Lead time:5-8 Working days after payment
Shippment: Express via DHL/FedEx/UPS,or by sea.Fast door to door service.
Why choose us?
1.Professional neodymium magnet manufacturer and exporter since 2008.
2.Competitive price with high quality neodymium magnet with REACH, ROHS and SVHC Certificate.
3.High graded raw material to ensure the long-term stability of magnetic properties.
4.DHL, Fedex, TNT, sea shippment and Multi-channel transportation.
5.One-stop magnet solution provider from production to shippment.
About us:
Fourearth Magnet Co.,ltd is founded in 2008,Which is a leading manufacturer of high performance permanent magnet with ISO9001:2008, ISO/TS 16949 and ISO14001 certificates in China. Fourearth serves a variety of markets from consumer electronics, industrial automation, automotive, green energy, household appliances, medical, aerospace and telecommunications. Fourearth's magnets are used in motors, speakers, generators, sensors, compressors, MRI, magnetic chucks and separators etc.
To meet the more and more demanding markets, Fourearth has been concentrating on manufacturing technologies for quality stability and cost reduction. Over the last ten years Fourearth export more than 90% of the magnets to American, European, Asian and African countries. With such wide range of magnetic material options, our professional technicians are available to help solve your magnetic needs and choose the most cost effective solution for you.
Strong neodymium pin magnet skittle pot magnet
Neodymium magnet is also named NdFeB magnet,rare earth magnet or permanent magnet.it is kind of sintered magnet.Neodymium magnet is the strongest permanent magnet in the world so far,which belongs to the fouth generation magnet.Besides its powerful strength, it is very tractable,it can be machined into different shapes, sizes, or with countersink holes,or edge and corner processing. we can do custom magnet to meet your requirements.
Specifications:
Product:Pin magnet
Grade:N33 N35 N38 N40 N42 N45 N48 N50 N52
Size:As per customer's request
Shape:round/disc,block,Cylinder,Bar,Ring,Countersunk,Segment,Ball,hook,Cup, Trapezoid,custom shape)
Surface Coating:Nickel, Zn, NiCuNi,Epoxy,Rubber,Gold,Sliver and so on
Tolerance:± 0.05mm
Magnetization Direction:Thickness/Axially/Diametrally/Multi-poles/Radial Magnetized
Working Temperature: 80°C (176°F)--220°C (428°F)
Sample: Available
Lead time:5-8 Working days after payment
Shippment: Express via DHL/FedEx/UPS,or by sea.Fast door to door service.
Why choose us?
1.Professional neodymium magnet manufacturer and exporter since 2008.
2.Competitive price with high quality neodymium magnet with REACH, ROHS and SVHC Certificate.
3.High graded raw material to ensure the long-term stability of magnetic properties.
4.DHL, Fedex, TNT, sea shippment and Multi-channel transportation.
5.One-stop magnet solution provider from production to shippment.
About us:
Fourearth Magnet Co.,ltd is founded in 2008,Which is a leading manufacturer of high performance permanent magnet with ISO9001:2008, ISO/TS 16949 and ISO14001 certificates in China. Fourearth serves a variety of markets from consumer electronics, industrial automation, automotive, green energy, household appliances, medical, aerospace and telecommunications. Fourearth's magnets are used in motors, speakers, generators, sensors, compressors, MRI, magnetic chucks and separators etc.
To meet the more and more demanding markets, Fourearth has been concentrating on manufacturing technologies for quality stability and cost reduction. Over the last ten years Fourearth export more than 90% of the magnets to American, European, Asian and African countries. With such wide range of magnetic material options, our professional technicians are available to help solve your magnetic needs and choose the most cost effective solution for you.
China strongest neodymium magnet NdFeB magnets N35-N52
Neodymium magnet is also named NdFeB magnet,rare earth magnet or permanent magnet.it is kind of sintered magnet.Neodymium magnet is the strongest permanent magnet in the world so far,which belongs to the fouth generation magnet.Besides its powerful strength, it is very tractable,it can be machined into different shapes, sizes, or with countersink holes,or edge and corner processing. we can do custom magnet to meet your requirements.
Specifications:
Product:Neodymium magnet/NdFeB Magnet
Grade:N33 N35 N38 N40 N42 N45 N48 N50 N52
Size:As per customer's request
Shape:round/disc,block,Cylinder,Bar,Ring,Countersunk,Segment,Ball,hook,Cup, Trapezoid,custom shape)
Surface Coating:Nickel, Zn, NiCuNi,Epoxy,Rubber,Gold,Sliver and so on
Tolerance:±0.05mm
Magnetization Direction:Thickness/Axially/Diametrally/Multi-poles/Radial Magnetized
Sample: Available
Lead time:5-8 Working days after payment
Shippment: Express via DHL/FedEx/UPS,or by sea.Fast door to door service.
Why choose us?
1.Professional neodymium magnet manufacturer and exporter since 2008.
2.Competitive price with high quality neodymium magnet with REACH, ROHS and SVHC Certificate.
3.High graded raw material to ensure the long-term stability of magnetic properties.
4.DHL, Fedex, TNT, sea shippment and Multi-channel transportation.
5.One-stop magnet solution provider from production to shippment.
About us:
Fourearth Magnet Co.,ltd is founded in 2008,Which is a leading manufacturer of high performance permanent magnet with ISO9001:2008, ISO/TS 16949 and ISO14001 certificates in China. Fourearth serves a variety of markets from consumer electronics, industrial automation, automotive, green energy, household appliances, medical, aerospace and telecommunications. Fourearth's magnets are used in motors, speakers, generators, sensors, compressors, MRI, magnetic chucks and separators etc.
To meet the more and more demanding markets, Fourearth has been concentrating on manufacturing technologies for quality stability and cost reduction. Over the last ten years Fourearth export more than 90% of the magnets to American, European, Asian and African countries. With such wide range of magnetic material options, our professional technicians are available to help solve your magnetic needs and choose the most cost effective solution for you.
China factory strong rare earth neodymium magnet
Neodymium magnet is also named NdFeB magnet,rare earth magnet or permanent magnet.it is kind of sintered magnet.Neodymium magnet is the strongest permanent magnet in the world so far,which belongs to the fouth generation magnet.Besides its powerful strength, it is very tractable,it can be machined into different shapes, sizes, or with countersink holes,or edge and corner processing. we can do custom magnet to meet your requirements.
Specifications:
Product:Rare earth neodymium magnet
Grade:N33 N35 N38 N40 N42 N45 N48 N50 N52
Size:As per customer's request
Shape:round/disc,block,Cylinder,Bar,Ring,Countersunk,Segment,Ball,hook,Cup, Trapezoid,custom shape)
Surface Coating:Nickel, Zn, NiCuNi,Epoxy,Rubber,Gold,Sliver and so on
Tolerance:± 0.05mm
Magnetization Direction:Thickness/Axially/Diametrally/Multi-poles/Radial Magnetized
Working Temperature: 80°C (176°F)--220°C (428°F)
Sample: Available
Lead time:5-8 Working days after payment
Shippment: Express via DHL/FedEx/UPS,or by sea.Fast door to door service.
Why choose us?
1.Professional neodymium magnet manufacturer and exporter since 2008.
2.Competitive price with high quality neodymium magnet with REACH, ROHS and SVHC Certificate.
3.High graded raw material to ensure the long-term stability of magnetic properties.
4.DHL, Fedex, TNT, sea shippment and Multi-channel transportation.
5.One-stop magnet solution provider from production to shippment.
About us:
Fourearth Magnet Co.,ltd is founded in 2008,Which is a leading manufacturer of high performance permanent magnet with ISO9001:2008, ISO/TS 16949 and ISO14001 certificates in China. Fourearth serves a variety of markets from consumer electronics, industrial automation, automotive, green energy, household appliances, medical, aerospace and telecommunications. Fourearth's magnets are used in motors, speakers, generators, sensors, compressors, MRI, magnetic chucks and separators etc.
To meet the more and more demanding markets, Fourearth has been concentrating on manufacturing technologies for quality stability and cost reduction. Over the last ten years Fourearth export more than 90% of the magnets to American, European, Asian and African countries. With such wide range of magnetic material options, our professional technicians are available to help solve your magnetic needs and choose the most cost effective solution for you.
Description
Product details
HC-AHR Slurry pump parts
Pump TypeFrame plate linerPart Code
HC-1.5/1B-AHRFrame plate linerHC-B1036
HC-2/1.5B-AHRFrame plate linerHC-B15036
HC-3/2C(D)-AHRFrame plate linerHC-C2036
HC-4/3CD-AHRFrame plate linerHC-D3036
HC-6/4DE)-AHRFrame plate linerHC-E4036R
HC-8/6E-AHRFrame plate linerHC-F6036
HC-10/8F-AHRFrame plate linerHC-F8036
HC-12/10ST-AHRFrame plate linerHC-G10036
HC-14/12ST-AHRFrame plate linerHC-G12043
HC-16/14TU-AHRFrame
h
i
na (Mainland)
Theory: Centrifugal Pump
Structure: Single-stage Pump
Usage: mining,dredging,water treatment and so on
Standard or Nonstandard: Standard
Fuel: Depend on customer
Pressure: High Pressure
Application: Slurry Pump Spares
color: depend on customer
Packaging & Delivery
Packaging Details:PLY Wood Case/Sandwich Plate
Delivery Detail:in 15 days
Supply Ability:3000 Piece/Pieces per Year
Port:TIANJIN
Payment Terms:L/C,T/T
Specifications:
Material:Natural Rubber,kinds of rubber
Superior Erosive Resistance
Product Advantages of Slurry Pump parts:
1.Important wet part of slurry pump, fit for slurry pump.All sizes available.
2.It is abrasive-proof,applied in abrasive working situation.
Flexiable rubber material can be offered,natural rubber,EPDM liner rubber, etc.
3.Natural rubber is used for liner, possessing superior erosive resistance in fine particle slurry applications.
4.The quality of threaded hole is superior for ease of liner change-out.
5.This liner is installed as a single unit to reduce over all maintenance costs and maximize wear life.
Our Service
1. Quick Reply
Your inquiry related to our products or prices will be replied within 12 hours.
2.We have a group of high quality technicians with rich experience who can solve everything during the whole process.
3.Guarantee quality, All the products have proved by ISO 9001:2008, CE, SGS. And also will be inspected strictly before delivery.
4.Perfect after -sales .We will be responsible for the whole life period
5.OEM order.Many material are available ,like High chrome, rubber , stainless steel and etc.Steely alloy,
ESDESD generator is used to evaluate the electrostatic immunity performance of electrical components and electronic equipments by simulating real electrostatic discharge as defined in the standard IEC/ EN 61000-4-2. Kindly find below features & technical data of our model ESD 30K.
Features:
1) User friendly 7 Touch Panel Display
2) Support multi-language & facilitate users
3) Built-in environment self-test program
4) Programmable operation
5) Pre-programmed IEC/ EN 61000-4-2 test settings
6) Very convenient to replace the discharge modules to meet different standards of the test requirements
7) RS232 / USB Port, PC control operation & printable test report
Technical data
1) Model: ESD 30K
2) Standard: IEC61000-4-2,GB/T 17626.2
3) Operation: 7 Touch Panel Display
4) Output voltage: 0.2~±30kV
5) Polarity: Positive/ negative/ alternating
6) Energy storage capacity: 150pF
7) Discharge resistor: 330Î
8) Discharge current rise time: 0.6~1ns
9) The first peak current (±15%): 7.5A at 2kV/ 15.0A at 4kV/ 22.5A at 6kV/ 30.0A at 8kVÂ
10)Â Current at 30ns (±30%): 4.0A at 2kV/ 8.0A at 4kV/ 12.0A at 6kV/ 16.0A at 8kV
11) Current at 60ns (±30%): 2.0A at 2kV/ 4.0A at 4kV/ 6.0A at 6kV/ 8.0A at 8kV
12) Holding Time (air discharge): 5s
13) Discharge Modes: Contact Discharge & Air Discharge
14) Operating Modes: Single discharge & repetitive discharges
15) Discharge Trigger: Manual, automatic or remote
16) Working Mode: IEC level mode/ user mode/ program mode/ voltage rising patterns
17) Discharge Interval: 0.05~9.99s
18) Discharge Count: 1~9999
19) Power Supply: AC220V± 10%,50/60Hz
20) Ambient Temperature: 15~35
Our sevice:
1) Our product engineers and application technicians answer various questions and deal with emergencies in real time.
2) Professional engineers will guide the installation & debugging of equipments so that users can operate devices independently and solve problems in daily test.
3) Free warranty for 1 year and lifelong maintenance.
4) Free upgrade service for the users is available as per international standard updates requirements.
If you have any further query on EMC/ EMI testing equipments, esd simulators, pls do not hesitate to contact us at lindashinegilcom
Â
We look forward to working with you sincerely!
299906 Internet Intranet Services Suppliers
Short on time? Let Internet Intranet Services sellers contact you.
