Carbon raiser is a carbon material, produced at high temperatures and used for carburization of steel and cast iron. It is applied during the steelmaking with low cast iron content (allow of steel and carbon) in charge in oxygen converter and electrosmelting processes. In metallurgy carbon raiser (milled graphite) is widely used for slag foaming, during coal graphite production, as a filler for graphite-reinforced plastic.
FIXEDCARBON 95%MIN SULPHUR 0.3% ASH 3.5%,MAX VOLATILE MATTER 1.5%MAX MOISTURE 0.5%MAX SIZE 1.5
Talc, mica, fly ash, bauxite, calcined bauxite, potash feldspar, quartz, sand, silica sand, micro silica, silica fume, bentonite, bleaching clay, ball clay, ethyl acetate.
Total Moisture : 1% ash Content :10% Volatille Matter :17% Fixed Carbon :71% Total Sulfur : 0,07% Gross Caloric Value : 6800 Kcal/Kg
Total Moisture : 1% ash Content :10% Volatille Matter :17% Fixed Carbon :71% Total Sulfur :0,07% Gross Caloric Value :6800 Kcal/Kg
Total Moisture : 1% ash Content :10% Volatille Matter :17% Fixed Carbon :71% Total Sulfur :0,07% Gross Caloric Value :6 800 Kcal/Kg
Wood Charcoal Moisture 5% Volatile 20% Ash content 4.9% Fixed carbons 69.5% Sulfur 0.07% Gross coloric value 7000 kcal
Total Mousture =---- Ash Content : 4,26% Volatile Matter : 4,79% Fixed Carbon :90,95% Total sulfur :0,05 % Gross Caloric Value :7676 Kcal/Kg Ready for grade = AB ABC CD DE
Cement, clinker, bauxite, gypsum, fly ash, slag, steel products, kaolin, scrap, pumice stone, silica sand, dolomite, coal, anthracite coal, pet coke, wood pellets.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Garnet sand, silica sand, quartz sand, gbfs, ggbfs, fly ash, stone aggregates, basalt, gabbro, talc, dolomite, micro silica, silica fume, manganese ore, manganese oxide, manganese dioxide, manganese sulphate, lime stone, gypsum, salt, bauxite, bentonite, kaolin ore, calcined china clay, washed kaolin, industrial salt, table salt, raw salt, washed salt, salt tablet, iodised salt, free flow salt, wood pellets, blast furnace slag, copper slag.Manufacturer, processor, packaging and trading
Petroleum Coke Product Description : Petroleum coke is a byproduct of the oil refinery industry. Petroleum coke refers to all types of carbonaceous solids obtained in petroleum processing, which includes green or raw, calcined and needle petroleum coke. Petroleum coke is used in many applications, including electrodes and anodes. It is also used as a fuel in the metal and brick industries. Price of product ( USD price or FOB price) : 10.000 MT monthly market price. 100.000 MT monthly market price Less 8%. Product origin : Russia and Non Russia Key Specifications/Special Features : Fuel Grade Petroleum coke of Low/High Sulphur. Calcium Petroleum coke, Graphitized Petroleum coke. Raw Petcoke, Anode Grade, Green Grade, Carbon Grade, Cement Grade, Needle coke, etc. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.
Fly Ash generated from Power Plants. Coal Fly Ash CFA could be used in huge quantities in two areas: ash dyke construction and low-lying region filling [26,27,28]. In several affluent countries, CFA has been utilized successfully as a structural filler.
Deals in activated carbon powder, granular activated carbon, sawdust, wood sawdust, biomass briquettes, white coal, iron ore, laterite, spices, raw salt, sea salt, common salt, refined salt, bleaching earth, mill scale, hms scrap, low ash metallurgical coke, marine gypsum, silica sand, silica flour, quartz, hematite powder, bentonite powder, china clay, quartz sand, fly ash, kaolin clay.Indonesian coal, South African coal, coke fines, ground granulated blast furnace slag ,coal based activated carbon, zinc ash, zinc dust, zinc, coal dust, earthing coal, coke breeze, talc powder, dolochar, gypsum powder, plaster of pairs, aggregate, marine gypsum, gypsum powder, pop & coke fines, chemical gypsum,saw dust ,washed marine gypsum, quartz powder excavator, ggbfs, granulated blast furnace slag, fly ash, iron mill scale, bleaching carbon.
Features Of Fly Ash Fly ash, also known as flue-ash is a residue which is generated during combustion and consists of fine particles. There are impurities in coal which mostly consist of clays, limestone and dolomite particles. These turn up into ash as they cannot be completely burned. Fly ash is useful in a number of ways and is one of the most researched upon mineral source. It is mainly a pozzolanic substance which contains aluminum and silicon material which in return due to the presence of water can take form of cement. A lot of research and development initiative have been taken place across the globe to build and develop technologies that can utilize the full potential of fly ash. Royal Mineral takes care to ensure flawless production stages.
Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of Australian coal.LAMC is Green fuel and 100% Eco Freindly Fuel. Coke is made by destructive distillation of a blend of selected Bituminous coals (called Coking coal or Metallurgical coal) in special high temperature ovens in the absence of oxygen until a greater part of the volatile matter is driven off. The resulting product, COKE, consists principally of Carbon with sizes ranging from basketballs (foundry coke) to fine powder (coke breeze). Coke is primarily used to smelt iron ore and other bearing materials in blast furnaces, acting both as a source of heat and as a chemical reducing agent to produce pig iron or hot metal. We currently operates non polluting non recovery type coke ovens . The raw material requirement is met by importing prime coking coal of Australian origin. The distinct features of our coke are as under: Meticulous coking cycle and relatively higher oven temperatures results in superior coke quality. Complete combustion of coking coals resulting in almost negligible levels of pollution. Advance In-house lab for complete analysis and to rectify minute changes in chemical specifications. We are planning to develop new trends as far as improved coke quality is concerned. Completely RCC coal & coke yard which ensures that the coke quality is maintained. Exclusive mechanized machines for exact sizing and screening of coke. Excellent infrastructure facilities like steel duct & stack and big size ovens which increases the efficiency as well as the quality of coke. We have expertise in producing different coke qualities for the requirements of blast furnaces, foundries, Ferro alloys. We are also diversifying into different activities and moving towards an eco friendly energy by setting up a power plant with the stack emissions of our coke oven. Low Ash Metallurgical Coke (Met Coke) is required for metallurgical and chemical industries and is used as the primary fuel where high temperature and uniform heating is required. The industrial consumers of LAMC include integrated steel plants, industry/foundries producing Ferro Alloys, Pig Iron, Engineering Goods, Chemicals, Soda Ash,Cement Industries,Zinc units and also used in Tea and hotel restaurants & etc.
We inform you that we are in a position to carry out immediate and effective procedures for the sale of ANTHRACITE with an initial production capacity of 35,000 tons per month with the possibility of progressive increases. Commoditie: ANTHRACITE Origin: PERU Incoterm: FOB Port of Salaverry, Peru. Initial requirement: 35.000 MT (thirty-five thousand tons per month) Contract: For 60 months (with the possibility of R&E). Price: Negotiable 100% CAD Against documents. Shipping time 60 (sixty) days after signing the contract and confirming the letter of credit. Characteristics of the analysis Volatile matter: 4.5% Ash: 8.0% Sulfur: 0.8 Overall Humidity: 8.0 Size, mm: 10-100 Calorific Power: 7000-7400 Kcal/Kg
by-product sourced from fuel powered energy plants
Anthracite Coal is the highest grade of coal, known for its high carbon content, low impurities, and energy efficiency. It burns cleaner and hotter than other types of coal, making it ideal for heating, industrial applications, and producing high-quality coke for steel manufacturing.
Fly Ash: Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries. The Major Utilization Areas Of Fly Ash : - Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC). - Part replacement of OPC in cement concrete. - High volume Fly Ash concrete. - Roller Compacted Concrete used for dam & pavement construction. - Manufacture of ash bricks and other building products. - Construction of road embankments, structural fills, low lying area development. - As a soil amender in agriculture and wasteland development. Types of Fly Ash: - According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties. - Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product. - Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash. - Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics. Minimum Order Quantity : 1 container
