The AEC1112- Computerized Universal Testing Machine with a maximum load capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton with the provision of testing various samples of metals and its different alloys for the testing in tensile mode for round and flat specimens as per the national and International standard like ASTM, DIN, ISO, EU and IS standards etc. capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton.
1.Model:WDW-100 2.Product name:computerized electrical universal testing machine 3. Applications of testing machine This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration. 4. Features of testing machine 1) Adopting aluminum alloy cover, with attractive streamline structure 2) Mainly used to test mechanical properties for metal, non-metal and composite materials 3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications 4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out. 5) With remote control box to realize speed adjustment of crossbeam, flexibly and freely switched 6) With functions of automatic return to original position, intelligently, efficiently, quickly 7) With limit position function of any working position and over voltage, over current protection functions, reliable and safe 8) With many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control 9) Switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison. 5.Spec. of testing machine
Force Capacity: 50N, 100N, 200N, 500N, 1kN, 2kN, 5kN Load Frame Configuration: 1 column, Table-top, Electromechanical Test Space: single zone Typical specimens: plastics, fine wire, fibers and threads, biomaterials, thin films, adhesives, foam, packaging, paper products, consumer products Features Complete selection of stiff, compact 1 column load frame configurations High-speed, low-vibration electromechanical drives World-class, maintenance-free AC servomotor and amp Precision, pre-loaded ballscrews Non-clutched drives, rated for full speed at maximum force Linear motion guides for superior alignment Versatile, easy-to-use software with standards-compliant method library (ASTM, ISO, DIN, EN, BS, and more) High-resolution, digital closed loop controls (integrated into load frame) Automatic limit checking of crosshead position, overload, over temperature, over voltage, etc. Complete selection of grips, fixtures, environmental systems and extensometers Durable test space protection Fully compliant with the latest global safety directives.
Parameters WEW-100 Accuracy 1% of indicated value Measuring range of force(kN) 2-100kN Subsection of force 1,2,5,10 Accuracy of deformation measurement 0.5%F.S Clamping diameter for round specimen(mm) ;6-22 Clamping width of flat specimen(mm) 40 Clamping thickness of flat specimen(mm) 0-15 Testing space Tension 550 Compression 500 Platen size 100 Distance of bending by pass roll(mm) 30-400 Piston stroke(mm) 250 Power supply : 50Hz Working environment Room temperature : relative humidity Overall dimension(mm) Frame machine730x500x2000 Control System 1070x810x1730 Weight(Kg) 1370
1. Max cpacity (kn) 1000 600 300 2. Measuring range (kn) 0 ~ 200 , 0 ~ 500, 0 ~ 1000 0 ~ 120 , 0 ~ 300, 0 ~600 0 ~ 60 , 0 ~ 150, 0 ~300 3. Accuracy (from 20% of the full testing range) grade 1 grade 1 grade 1 4. Time for load maintained (s) í² 30s í² 30s í² 30s 5. Max. Distance between flexible clips (including ram travel) 500 500 500 6. Distance between upper and lower platens 0 ~ 500 0 ~ 500 0 ~ 500 7. Distance between two fulcrums of bending test 100 ~ 420 100 ~360 100 ~360 8. Cliping diameter for round specimen ª¦20 ~ª¦60 ª¦13 ~ª¦40 ª¦8 ~ª¦32 9. Cliping thickness for flat specimen 0 ~ 40 0 ~ 15 0 ~ 15 10. Max. Ram travel (mm) 200 200 150 11. Max rising speed of the ram (without load mm/min) 0 ~ 80 0 ~ 80 0 ~ 80 11.Dimensions (l*w* h) main frame (mm*mm*mm) 960*620*2150 880*600*2020 740*460*1970 Console (mm*mm*mm) 600*660*1780 600*600*1780 600*600*1780 12. Net weight (kg) main frame 2200 1700 1200 11.Dimensions (l*w* h) main frame (mm*mm*mm) 960*620*2150 880*600*2020 740*460*1970 Console (mm*mm*mm) 600*660*1780 600*600*1780 600*600*1780 12. Net weight (kg) main frame 2200 1700 1200
Main function and characteristic: This machine adopts hydrocylinder underneath type, the assembly key of oil-fountain-oil-pump motor setíóflooding valveíóchange-direction valve are the brand products, the computer measure display of amplifier is ourselves produce, in good interface. It can display test forceíótest force peak valueíóloading speed. It according with the requirements of the standard of< GB/T228-2002 Metallic materials- Tensile testing at ambient temperature>,it used do tensileíópressureíóbending and cutting for metal and non-metal materials. Main Technical Parameters: Max. test forceú¦ 1000kN Scope of test force measureú¦4-1000kN Accuracy of measure test forceú¦í+1% Journey of piston ú¦ 250mm Max. journey speed of pistonú¦50mm/min Displacement measure distinguishú¦ 0.01mm Deformation measurementú¦Four-shelves measure, each shelf full measuring span of 20%, í+0.5%FS Max.tensile spaceú¦750mm (Include piston journey) Max.pressure spaceú¦ 580mm Thickness of flat specimenú¦ 0-40 mmú+ Dia. Of round specimenú¦ ª¦13-ª+60mm Size of platenú¦ ª+160mm Distance of bending testing rollsú¦60mm-700mm Width of rollsú¦ 140mm Beam travels speed about: 120mm/min Mode of clampú¦Hydraulic pressure clamp Size of outlineú¦ 1000í-700í-2350mm
Its new floor type universal material testing machine which applied by latest design and producing skill to have strong structure, saving transmission power and electric current without specific power system. Undoubtedly we still keep the advantage for testing precision, simply operation, expand strong. Its the best choice for material testing machine.
Application: For static and cuasi-static test (low frequency fatigue) for high loads in many types of tests. Specially indicated to switch test mode, thanks to its dual space design. Double test space frame: With high structural stiffness,4 columns and 2 screws with double testing space The upper space is intended for tensile tests, and the lower for compression, shear, bending, folding, etc. Manufactured according to Standards EN 10002-2; ASTM E4, ISO 7500-1; DIN 51221 and BS1610 guide. Mobile crossbar separates the two test zones and is positionable in height by means of two spindles driven by an integrated electric motor frame.
This series materials testing machine product group was primarily developed for standardized tests on ma- terials and components. Used in conjunction with the intuitive KStest software. Typical test applications for wide range of tension, compression, bending, shearing and low cycle test, include metal, rubber, plastic, spring, high strength steel (HSS), aerospace and automotive structures, screws, nuts, etc. Standards: ASTMA370, ASTME4, ASTME8, ASTME9, ISO6892, ISO7438, ISO7500-1, EN10002-4, GB/T228-2002, GB 16491-2008, HGT 3844-2008 QBT 11130-1991, GB13-22-1991, HGT 3849- 2008,GB6349-1986, GB/T 1040.2-2006, ASTM C165, EN826, EN1606, EN1607, EN12430 etc
This electronic universal testing machine consist of host machine, mechanical limit switch, electrical system, test accessaries, etc . It is suitable for tensile, compression, bending and other mechanical property for metal and non-metal material, such as steel, aluminum,copper,geotextile,plastic,rubber,thread,wood,alloy,PVC,spring,electrical wire and cable, composite material, profiled bar, waterproof roll and all ASTM, ISO, JIS, DIN, BS, EN relative material mechanical testing standards. The machine is calibrated according to international norms requirement as ASTM E4, ASTM E83, ISO7500-1, ISO9513 and supply a full detailed calibration certificate. They are essential testing instruments for quality control section, university and college, research institution and mining enterprise quality lab.
We are the reputed supplier and importer of Universal Testing Machine in India - Contact us now to Get Quick quote for Universal Testing Machine in India by JJ Test. This device is ideal for measuring tension, compression, bending, peer and tear in plastics, metal wires, nylon wires textile, packaging etc.
Main technical parameters: Notechnical parametertld-20a 1max load20kn 2accuracy gradegrade 1 3measuring range0.2%~100% 4load measuring accuracyr.O.�0.5% 5testing force resolution1/200000fs 6range of testing speed0.001�?500 mm/min 7speed accuracyr.O.�0.5% 8measuring accuracy of displacementr.O.�0.5% 9measuring system of deformation5~800mm 10measuring accuracy of deformationr.O.�0.5% 11mechanical structuregate model 12valid testing space1200mm 13valid testing width350mm 14position limit protectionselectronic position limit protection 15over current protectionexceed 20% voltage, machine will stop automatically 16overloadexceed 10% max load, machine will stop automatically 17power supplysingle phraze 220v�10% 18power0.75kw 19weight190kg 20dimension0.8*0.5*1.6 Other functions All machines are controlled by microprocessor, it can be controlled independently, menu operation, flexibly set, lcd, english interface. All the machines equipped with micro printer to print the result. May match pc, the special software can measure the performance data of various materials. May match macro-deformation measure system Additional load cell can expand the measuring range of load. According to different voltage, the user can chose the different power adaptor.
Product Code PRS-EU8050 : Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph. PRS-EU8300 : Electromechanical Universal Test Machine, 300 kN, 220-240V, 50-60Hz, 1 ph. STANDARDS : EN ISO 6892-1, EN ISO 15630-1 and 2, EN ISO 7500-1 PRS-EU8050, 50 kN and PRS-EU8300, 300 kN capacity fully automatic Electromechanical ParsRos Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. PRS-EU8050 and PRS-EU8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories. Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories. These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor. Advanced closed loop control system assures accurate load or displacement pace rate on sample. The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models. The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC. The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately. PRS-EU8050 supplied with; � Compression Platens � Load Cells 50 kN Capacity PRS-EU8300 supplied with; Compression Platens Load Cells 300 kN Capacity ACCESSORIES Electromechanical Universal Testing Machines are suitable for difference tests on various materials as Uniaxial Tests, Triaxial Tests, Steel Re-bars, Cement and Concrete, Soil (CBR), Asphalt (Marshall, Indirect Tensile, Duriez), Tiles, Flat Blocks etc. General Accessories; 1.PRSGM-0040 Load Cell, 5 kN Capacity 2.PRSGM-0042 Load Cell, 50 kN Capacity 3.PRSGM-0043 Load Cell, 300 kN Capacity 4.PRSGM-0115 Compression Platens, used to perform uniaxial and unconfined compression tests. 5.PRSM-0500 Extensometer for universal testing machine, 50 mm gauge length, 10 mm travel (to use with max �:22 mm specimens) 6.PRSM-0520 Extensometer for universal testing machine, 50 mm gauge length, 100% strain feature, standard temperature range: -40°C to +100°C (-40°F to 212°F).
PRS-EU8050 Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph. PRS-EU8300 Electromechanical Universal Test Machine, 300 kN, 220-240V, 50-60Hz, 1 ph. PRS-EU8050, 50 kN and PRS-EU8300, 300 kN capacity fully automatic Electromechanical ParsRos Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. PRS-EU8050 and PRS-EU8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories. Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories. These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor. Advanced closed loop control system assures accurate load or displacement pace rate on sample. The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models. The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC. The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.
PRSM-4000 Hydraulic Universal Testing Machine,600 kN, 220-240V PRSM-4000/110 Hydraulic Universal Testing Machine, 600 kN, 110V PRSM-4001 Frame for 600 kN Hydraulic Universal Testing Machine PRSM-4002 Hydraulic Grips Jaw Faces Set for Round Specimens PRSM-4003 Hydraulic Grips Jaw Faces Set for Flat Specimens PRSM-0500 Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.01 mm), PRSM-0510 Extensometer for Universal Testing Machine, 100 mm Gauge Length (Accuracy 0.01 mm) PRSM-0520 Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.001 mm) PRSM-4000 Universal Hydraulic Tensile Test Machine is designed to test the ferrous materials for structural values such as yield strength and tensile strength. Apart from tensile tests, Universal Test Machines can also be used for compression tests up to the capacity of the machine. Maximum security is maintained on 600kN capacity Universal Test Machine by limit switch on the lower grip and piston as well as the safety check valves on the hydraulic system. Hydraulic power unit works silently.0-40 mm flat and 8-32 mm round samples can be tested with a user friendly hydraulic jaws that comply with standards. Load cell is used for load measurements. Strain measurement is done by the electronic displacement transducer built in the machine if required external extensometer fitted to the specimen also can be used for strain measurement. Strain measurements can be done directly from the extensometer fitted to the specimen. Tests can be done fully automatic by digital control unit or computer. Machine complete the test with the set pace rate and turns to start position automatically. PRSM-4000 Hydraulic Universal Testing Machine, features two test spaces for tension tests and compression tests. User can quickly change between tension and compression testing without having to remove heavy fixtures. This flexible design also helps to ensure safety, reduces operator effort and improves productivity. The distance between the grips can be set by motor driven hand set system. With open front hydraulic wedge grips user can load specimen easily.
1. Applications of testing machine This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration. 2. Features of testing machine 1) adopting aluminum alloy cover, with attractive streamline structure 2) mainly used to test mechanical properties for metal, non-metal and composite materials 3) adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications 4) after test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out. 5) with remote control box to realize speed adjustment of crossbeam, flexibly and freely switched 6) with functions of automatic return to original position, intelligently, efficiently, quickly 7) with limit position function of any working position and over voltage, over current protection functions, reliable and safe 8) with many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control 9) switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison.
1. Equipment usage: This testing ± 1/500000, Relative error of indication: better than ± 1% of the indication, 2 displacement (moving crossbeam, excluding stretching fixture), Measurement range: 0-700mm, Resolution: 0.0025mm, 3 Test speed: Speed adjustment range: 0.01-500mm/min (stepless speed regulation), Accuracy: better than ± 0.5% of the indicated value, Displacement rate control accuracy: within ± 1.0% of the set value when the rate is less than 0.1mm/min; When the speed is 0.1mm/min, within ± 0.2% of the set value, 4 Control: Force control speed regulation range: 0.005-5% F.S/S, Force control rate control accuracy: within �± 2% of the set value when the rate is less than 0.05% FS/S; When the rate is 0.05% FS/S, within the set value of ± 0.5%/ ± 1.0%, Deformation speed regulation range: 0.005% FS/S, Deformation rate control accuracy: within ± 2% of the set value when the rate is less than 0.05% FS/S; When the rate is 0.05% FS/S, it is within ± 0.5% of the set value, Constant force, constant deformation, and constant displacement control range: 0.5% -100% FS/S, Constant force, constant deformation, and constant displacement control accuracy: within ± 0.1% of the set value when the set value is â 10% FS; When the set value is less than 10% FS, within ± 1% of the set value. 5 Effective test space (with fixture): Effective stretching space: 700mm, Effective compressed space: 700mm, 6. Working environment: Room temperature 10~35 , humidity 20%~80%, 7. Power supply for the entire machine: single-phase, 220V ± 10%, 50Hz, 8 Host size: 530 370 1400mm, 9 Weight: 140 kg,
The universal testing machine can test multi types mechanical strength of metal or non-metal material, it mainly can test tensile, compression, bending strength. Normally the max loading is 300kn, 600kn, 1000KN. Hydraulic driven, digital display, manual oil control, test report print output.
It is computer-controlled precision testing machine, suitable for extensive metallic & nonmetallic materials for tension, compression, bending, shearing and cycle test etc. It features high precision, high stability as well as high reliability. Equipped with PC system & printer, graph, test result display, data processing and printing can be done easily. Complete with modulus for metal, spring, textile, rubber, plastic and other material testing. It is widely used in many fields of R&D, QC and QA and education institutes. Single Column Type:Size (mm)384,550,1415 Weight (kg)55 Table Type:WDW-1/2/3/5/10/20 780x500x1737 140mm WDW-25/30/50 840x600x1944 230mm WDW-100 950x700x2120 250mm Floor Type:WDW-50 900x500x2000 580mm WDW-100 950x600x2050 650mm WDW-200/250/300 1100x650x2400 950mm WDW-500/600 1320x840x2500 1800mm.
This testing machine adopts a column structure, uses hydraulic loading (computer directly controls the loading speed or rate), and the computer displays the test results. It is convenient to operate and the test readings are accurate and reliable. It can be used for general steel, bolts, anchoring agents and other metal materials. Tension, compression, bending and shear tests, as well as compression and bending tests for general materials, plastics, cement and concrete.
