«contrrust» is environmentally-friendly rust converter based on natural products and water . It converts rust into bluish-black, protective, natural polymer which stops further rusting and also can be used as primer. Ideal for iron or steel. Will not work on aluminum, copper, stainless steel, or galvanized metal. Key advantages: - “green” product, not toxic, not polluting - no mineral acids, no damage to surface - no need for additional surface preparation and after-treatment - work in hardly accessible places - no additional equipment is needed - life time of the steel is 6-12 times longer compared to using competitive remedies. Application areas Industrial fabrication Machinery & equipment manufacturing Building construction Ports & docks Shipping industry Automobile industry Locomotive and railways Installation of petroleum and petrochemical industries Oil & natural gas installations Spreading rate: 60-200 g/m2 (depending on thickness of rust layer) 5, 20, 50, 100 or 1000 liters container.
Rust converter, paints.
Maximum active power - 4.8 kW; Maximum power consumption - 7.4 kVA; Voltage regulation range in MIG mode - 13-23.5 V; MIG welding wire nominal diameter - 0.6-1.0 mm; Maximum diameter of MIG filler wire - 1.2mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 2.5-13 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-160 A; Welding electrode diameter - 1.6-4 mm; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 25% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V. Number of power transistors - 6; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW; Maximum power consumption - 6.6 kVA; Voltage regulation range in MIG mode - 13-22 V; MIG filler wire nominal diameter - 0.8-0.9 mm; Max.MIG filler wire diameter - 1.0mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 1.5-9 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-140 A; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V; Number of power transistors - 4; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW Maximum power consumption - 6.6 kVA Voltage regulation range in MIG mode - 13-22 V MIG welding wire nominal diameter - 0.6-1.0 mm Max.MIG filler wire diameter - 1.0mm Welding wire type - copper-plated / flux-cored Wire feed speed - 1.5-9 m / min Diameter of wire spools to be installed up to - 200 mm Current regulation range in MMA mode - 20-140 A Welding electrode diameter - 1.6-4 mm Modes of operation MIG - 2T / 4T / Spot time Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC) Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC) Efficiency - 88% Hot start - yes Anti stick - yes Arc force - yes Open circuit voltage - 65 V Number of power transistors - 4
Heating area - up to 3 sq.m. Weight - 3 kg Dimensions - 750mm x 130mm x 14mm Power consumption - 157 Watt Manufacturer Warranty - 5 years Electric skirting panels warm up walls and help eliminate mold, fungus, moisture, and condensate in rooms that usually have cold corners or cold external walls. Heating such a room with an ordinary oil-filled radiator, electric water boiler, or electric fan heater will not solve the problem. Three different models of UDEN-S skirting panel heaters range between 100W, 150W, and 200W in power capacity. They can be used not only as a stand-alone heating system but also combined with other UDEN-S heaters for efficient heating and a comfortable feeling in the room. Beautifully designed, our skirting panel heaters are only 13cm in height and only 14 mm in thickness. They come in white color as standard but a customer can order any color from our rich palette (over 100 colors and shades) that will match the customer's interior.
Heating area - up to 4 sq.m. Weight - 3.5 kg Dimensions - 998mm x 130mm x 14mm Power consumption - 200 Watt Manufacturer Warranty - 5 years Electric skirting panels warm up walls and help eliminate mold, fungus, moisture and condensate in rooms that usually have cold corners or cold external walls. Heating such a room with an ordinary oil filled radiator, electric water boiler, or electric fan heater will not solve the problem. Three different models of UDEN-S skirting panel heaters range between 100W, 150W, and 200W in power capacity. They can be used not only as a stand-alone heating system but also combined with other UDEN-S heaters for efficient heating and comfortable feeling in the room. Beautifully designed, our skirting panel heaters are only 13cm in height and only 14 mm in thickness. They come in white colour as standard but a customer can order any colour from our rich palette (over 100 colours and shades) that will match the customer's interior.
LFG-50 & PT-14 Сable tracing and fault location set, can be used for locating as well as tracing underground metal communications, such as any cables with metal cores as well as metal pipes. In addition, it provides operator with a quick detection of short circuits on cables as well as with an identification of a cable in a bunch. LFG-50 is a 50 W low frequency generator with ability to inject a signal of three frequencies via direct connection to an object or via internal transmission loop antenna, which is built-in a cover lid. Basic frequencies are 491; 982 and 8440 Hz. There are options of using a single-frequency or multi-frequency signals at the output. The power of the low frequency generator LFG-50 output signal can be adjusted up to 50 W with 2.5 W steps. This signal can be transmitted constantly or broken into separate blocks of 50 % duty cycle with 1 s repetition rate. A load matching is made automatically. Main parameters, such as output power, load impedance, selected frequency are shown on OLED display. If a load is higher than 1000 Ω LFG50 automatically switches into output voltage setting mode. The output overload protection will trip, when operating on short-circuit loops (lower than 0.5 Ω). MAIN FEATURES: Portable and lightweight Moistureproof and dustproof case Advanced LiFePO4 internal battery with fast charging option High-contrast graphic OLED display Multifrequency operation Operating frequencies can be changed upon request Internal transmission loop antenna Automatic load impedance matching Ability to work with energized 0.4kV cables (inductive connection) Overload protection Сable locator PT-14 designed for fast and accurate searching for power cables and other communications, identification of coating defects and the depth, followed by mapping.
Diesel generators, gas-diesel generators, marine diesels, gas-turbine engines, boilers, transformers, isolators, turbo generator, turbines, breaker, pump, compressor, lathe, relay, contactor, automatic circuit breaker, electromagnetic starter, motor, press.
Controllers Like Heater Control Panels, Electric Control Panels.
Gas Turbine Power Plants (with Unit Capacity 2.5; 6; 15 and 16 MW), Waste Heat Boilers and Heat Recovery Steam Generators, Gas Turbine Engines Like DZh-59 (15 MW, Zorya - Mashproekt ), AI-20 (2, 5 MW, JSC Motor Sich ), NK-16-18ST (18 MW, KMPO ), MS-5001 (26 MW, General Electric ), LM6000PD-Sprint (45 MW, General Electric ), Auxiliary Equipment Like Air-Cleaning Devices, Noise-Suppression Units, ACS With Higher Level, Heat Exchangers, Convective Blocks, Economizers, Steam Superheaters, Parts of Heavy-Duty Steam Boilers Like Radiation Superheaters, Reheater Panels, High-Frequency (HF) Welded Fin Tubes, Material Such as Carbon Steel, Alloy Steel.
Power hand toos tools, non power hand tools., welding inverter and mma., consumables, cutting and grinding disks, welding electrodes.
Wood working industry (converted timber), metallurgy (metal roll), agricultural production, food products, inspection technology, diesel locomotive, wagging spares, chemical production, chemical agents for oil and gas drilling.
"Name: SWING SEAT with pillow ""Deli dralon"" Open size:209x118x162 cm Sructure in iron painted with epoxy-powders Tube: 60 mm Canopy:185 g/m2 dralon (acrylic fiber) Seat bottom: mettalic mesh convertible into a bed Cushion:sponge filling, 185g/m2 dralon (acrylic fiber) Color: frame/black , fabric/as on picture.
Granular Urea 46% in Bulk, manufacturer in Turkmenistan with price of 185$-195$ MT (it depend manufacturer). The product is of Turkmenistan origin and they are be able to supply of the Urea till 50 000 MT monthly. UREA 46% - THE TYPICAL PHYSICAL PROPERTIES Name of parameter B Grade 1. Nitrogen fraction of total mass on dry basise, %, not less 46,2 2. Biuret (Ureido Formamide) fraction of total mass,% no more 1,4 3. Loose ammonia fraction of mass, % no more for carbamide crystal - prilled - 4. Mass share water, %, no more - Method of drying 0.3 - Method Fishera 0.5 5. Friability, % 100 6. distribution of sizes,%: - fraction of total mass of granules with size,mm : 1 - 4,not less 94 2 - 4, not less 70 less than, not less 3 6-mm sieve residue, no more 6-mm sieve residue, no more 7. Static hardness of granules, kgf/granule, not less 7 Urea the most concentrated Nitrogen fertilizer, contains in form, soil converts first into into nitrate forms. It is easily soluble in water. We have ability to arrange the logistics and supply to any country with CIF conditions. The payment condition is by prepayment (preferably) or SBLC / DLC / LC (needs be discussed).
Product description: Caseinates is a dairy protein ingredient, converted into caseinates by dissolving the acid casein, curd with water and dilute alkali and then drying the solution (Extrusion method). Caseinates is multifunctional highly nutritious milk protein. Properties: Caseinates contribute a high degree of emulsification, emulsion stability and stabilizing properties. They are also effective in binding water and offering whipping and aeration stability to food emulsions. Application Dairy industry: Stabilizer, emulsifier, binder for production of ice-creams, yogurts other dairy products. For higher yield in hard cheese production; Processed cheese and imitation cheese production Meat industry: in production of meat products ( sausages, hams, hamburgers, etc.) has the unique property of substantial water, jelly and fat absorbency. Bakery: caseinates helps to improve and control texture and uniformity, the source of protein. Food concentrates: excellent emulsifier and foaming agent in whipped toppings, soups, salad dressings, dessert mixers. Food additives production: high nutrition protein in diet and sport food; stabilizer in coffee creamers production.
Pts controller over fuel dispensers and atg systems for petrol stations is a forecourt controller intended to be used in connection with third party control system for petrol station (pos system, cash register, opt terminal, etc) to provide simultaneous remote control over petrol, diesel, cng and lpg dispensers and automatic tank gauge (atg) systems installed at petrol, cng and lpg stations and storage depots. Pts controller provides control using the single common communication protocol. Pts controller works as a protocol converter and provides conversion of its common communication protocol into various proprietary communication protocols of fuel dispensers and atg systems. Pts controller is supplied with a rich set of api (application programming interfaces) developed under most popular programming languages and environments in order to make comfortable and quick implementation of pts controller into control systems for petrol stations (pos system, cash register, opt terminal, etc). For more information please visit our website www.Technotrade.Ua
Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers. Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows. The heating system is FANCOIL heaters connected to classical heating system. Basic equipment convectors as follows: • box (making possible options: fiberglass, metal powder-coated); • copper-aluminum heat exchanger; • flexible connection hoses with shut-off valves; • tangential fans (in models with forced convection) Optional equipment: • oak grill or duralumin (different colors, roll or longitudinal) • Electronic room thermostat; • converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300); • converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120); • smooth speed control of fans. Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting. Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors: • box of fiberglass-50 years • box with powder coating 10 years • wooden box (floor) - 2 years • copper-aluminum heat exchanger 10 years • aluminum grille-5 years • wooden lattice - 1 year • electrical parts - 5 years • valves - 1 year Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter. 9kg for 1 m.P sizes upon request
Pressure-Volume and Flow-Volume, displayed waveforms can be cycled instantly with a touch of a button 3.Standard integrated metallic modular respiratory circuit; completely solves the problem of gas sealing under high temperature disinfection, easy to clean and disinfect 4.Power Failure Support Functions: Automatically converts to backup power mode during AC power outages 5.Equipped with electronic pressure differential flow sensor, imported respiratory control valve, stable and reliable, rapid response time 6.High precision five tube flowmeter, fitted with interlocking oxygen-nitrous oxide supply, guarantees oxygen output is never lower than 21% 7.Nonhazardous environmentally friendly frame, precise construction, elegant design, equipped with automated self-checking function during startup and an automatic self-calibrating sensor 8.Alarms: Audible and/or visual alarms for tidal volume, airway pressure, oxygen concentration, asphyxia, power failure, oxygen failure and other alarms, also features a alarm query function 9.Vaporizer: Imported tank components assembled locally; Enflurane, Isoflurane and Sevoflurane (Halothane optional). Also possesses self-compensating functionality 10.Advanced and stable Adjustable Pressure Limiting (APL) valve, suitable for low and ultra low flow anesthesia 11.Equipped with advanced international rotating Na-lime tank, easy-operate, requires only one hand, and uses imported PPSU material and temperature resistant to 134�°C 12. Multi-parameter Patient Monitor: Optional
Fuel dispensers' pumpheads (electronics and indicators) unicon-tit are designed for provision of control over fuel dispensers (pumps) to deliver liquid and liquefied petroleum products and visualize this process on indicators of the dispensers. Modes of operation: -autonomous: delivery of petroleum products is made at removal of dispenser nozzle or using a switch start; -autonomous from a preset keyboard: mode of petroleum products delivery (delivery of certain volume, delivery for a certain sum of money, delivery up to a full tank), order's amount and allowance for a delivery are set from a keyboard of the device; -from a control system: mode of petroleum products delivery, order amount and allowance for a delivery are set by a remote control system (cash register, pos system, control panels, etc); -from a control system at setting a doze amount on a keyboard of the indicating device: in this case operation mode of a fuel dispenser and an order amount are set on a keyboard of the indication device and allowance to make delivery of petroleum products – from a remote control system (cash register, pos system, control panels, etc). For more information please visit our website www.Technotrade.Ua
