Our company produces drywall profiles (CD, UD, CW, UW, UA). These profiles are used in construction, interior works. Products are available in different lengths and widths. For more information please contact us.
Our company produces draywall profiles (CD, UD, CW, UW, UA). These profiles are used in construction, interior works. Products are available in different lengths and widths. For more information please contact us.
Founding: aluminum billets and shaped castings by weight up to 120kg, bronze and brass alloys by weight up to 200kg, cast-iron billets and shaped components from grey alloyed high-strength cast iron by weight up to 500kg, blanking operations by blacksmithing and press forming.
The New Mil-tek Xp100s Long Cylinder Waste Compactor is a Small, Stainless Steel Waste Press Ideal for Compact, Clean Locations Such as Kitchens. The Long Cylinder Increases the Level of Compaction Within a Small Footprint Area.
Long Cylinder
Fits 240 Litre Bins
Stainless Steel Frame
Small Footprint (52 Cm2)
Densely Compacted Waste
Reduced Energy Consumption
Suitable for Kitchens & Food Preparation Areas
Product Overview
The Mil-tek X-press 100 Long Cylinder Waste Compactor is a Small Size Waste Compactor Suitable for a Variety of Locations Including Kitchens, Small Cafes, Food Preparation Sites, Hospitals, Offices, and General Waste Areas.the Stainless Steel Waste Press is Small Enough to Be Installed Indoors and in Clean, Working Environments. It is Free From Oil or Other Contaminants. With a Footprint of Less Than 52cmâ², the Xp100s Waste Press Can Easily Be Added to Working Environments Such as Food Preparation Areas, Creating a Seamless Waste Disposal Process and Minimizing Any Time Wasted Transporting Waste.the Long Cylinder of the Xp100s Waste Press Compacts Waste More Densely With Each Cycle, Creating Densely Compacted Bags of Waste Up to 50 Kg in Weight. The Long Cylinder Also Uses Less Power With Each Stroke, and Can Run on as Little as 2 Bars of Pressure. Compacted Waste From an Xp100s Can Easily Be Transported Using a Mil-tek Lift Trolley. Using a Lift Trolley, Waste Bags Are Slid From the Wagon to the Lifting Plate, Winched Up and Pushed Into Waste Bins, Eliminating the Need for Heavily Lifting.
Machine Size
Height (Mm) : 1970
Width (Mm) : 670
Depth (Mm) :704
Weight : 120 Kg
Bag Height (Mm) : 600 Mm
Bag Diameter (Mm) : 450 Mm
Weight of Full Bag : <50 Kg
Material : General / Kitchen Waste
Degree of Compression : < 90%
Noise Level : < 70 Db(a)
Pressure : 1500 Kg at 5 Bar
Approvals : Ce, as/nz 4024.1
Set Price : 4680.00 Eur
In Set Included:
Xp100s Compactor
1 Box Bags 100l (100 Pcs./box)
1000 Pcs.wire Ties
Wire Tie Twister/strapper
Optional : Ompressor Mt1 B Hd :925.00 Eur
Extra Bags, 100l, 5 Boxes (500 Pcs. ) : 245.00 Eur
Ideal for small spaces and indoor environments, the X-Press 200S compactor is tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1.
Stainless steel
10:1 compaction
Improves security and safety
Low on noise, low on energy
Air-powered, clean and hygienic
Suitable for kitchens & offshore environments
Product Overview
The Mil-tek X-Press 200S stainless steel waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 200S waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. You also reduce the number of bins and collections by 80%, reducing the cost and improving the internal logistics and productivity of your organisation.A compaction ratio of up to 10:1 has a significant impact on waste costs by reducing number of waste containers and frequency of hauls.The Mil-tek X-Press 200S is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 200S is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination.
Machine size
Height (mm) : 2025
Width (mm) : 810
Depth (mm) : 779
Weight : 150 kg
Bag height (mm) : 600
Bag diameter (mm) : 570
Weight of full bag : <60 kg
Material : General / Kitchen Waste
Degree of Compression ; < 90%
Noise level : < 70 dB(A)
Pressure : 1500 kg at 5 bar
Approvals : CE, AS/NZ 4024.1
SET PRICE : 4800.00 EUR
In set included:
XP100S COMPACTOR
1 BOX BAGS 200L (100 PCS./BOX)
1000 PCS.WIRE TIES
WIRE TIE TWISTER/STRAPPER
OPTIONAL:
COMPRESSOR MT1 B HD : 925.00 EUR
EXTRA BAGS, 200L, 5 BOXES (500 PCS.) : 312.00 EUR
Ideal for small, indoor environments, Mil-tek X-Press compactors are tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1.
10:1 compaction
Improves security and safety
Low on noise, low on energy
Air-powered, clean and hygienic
Compact general and hazardous waste
Suitable for kitchens & offshore environments
Product Overview
The Mil-tek X-Press 200 waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 200 waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. You also reduce the number of bins and collections by 80%, reducing the cost and improving the internal logistics and productivity of your organisation.A compaction ratio of up to 10:1 has a significant impact on waste costs by reducing number of waste containers and frequency of hauls.The Mil-tek X-Press 200 compactor is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 200 is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination.
Machine size
Height (mm) : 1825
Width (mm) : 830
Depth (mm) : 800
Weight : 135 kg
Bag height (mm) : 600
Bag diameter (mm) : 570
Weight of full bag : <60 kg
Material : General / Kitchen Waste
Degree of Compression : < 90%
Noise level : < 70 dB(A)
Pressure : 1500 kg at 5 bar
Approvals : CE, AS/NZ 4024.
SET PRICE : 4800.00 EUR
In set included:
XP100S COMPACTOR
1 BOX BAGS 200L (100 PCS./BOX)
1000 PCS.WIRE TIES
WIRE TIE TWISTER/STRAPPER
OPTIONAL:
COMPRESSOR MT1 B HD : 925.00 EUR
EXTRA BAGS, 200L, 5 BOXES (500 PCS.) : 312.00 EUR
Ideal for small, indoor environments, Mil-tek X-Press compactors are tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1.
10:1 compaction
Improves security and safety
Low on noise, low on energy
Air-powered, clean and hygienic
Fixed frame unit & sliding wagon
Suitable for kitchens & offshore environments
Compact general, kitchen and hazardous waste
Product Overview
The Mil-tek X-Press 300 waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 300 waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. The fixed frame unit and sliding wagon allows the X-Press 300 to be securely bolted in place making it ideal for shipping, offshore environments or uneven surfaces.The Mil-tek X-Press 300 compactor is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 300 is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination.
Machine size
Height (mm) : 1850
Width (mm) : 670
Depth (mm) : 1155
Weight : 107 kg
Bag height (mm) : 600
Bag diameter (mm) : 450
Weight of full bag : <50 kg
Material : General / Kitchen Waste
Degree of Compression : < 90%
Noise level : < 70 dB(A)
Pressure : 1500 kg at 5 bar
Approvals : CE
Set Price : 4990.00 Eur
In Set Included:
Xp100s Compactor
1 Box Bags 100l (100 Pcs./box)
1000 Pcs.wire Ties
Wire Tie Twister/strapper
OPTIONAL :
COMPRESSOR MT1 B HD : 925.00 EUR
EXTRA BAGS, 100L, 5 BOXES (500 PCS.) : 245.00 EUR
The E319 Cardboard & Plastic Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a steady stream of cardboard and plastic waste and packaging.
High compaction pressure
Electric: almost silent running 57 dB (A)
Electric: no hydraulic oil
Plug'n'Press: modern control system
Constant Pressure: Locks pressing plate in place
Safe and easy built-in bale ejection
Product Overview
The Electric E319 is a quiet-running electro-mechanical baler. Featuring a spindle-driven pressing plate, the E319 quietly compresses material with up to 15 tonnes of pressing force.Suitable for cardboard, plastic and other recyclable material, the E319 has a modern control system to start the machine and activate the pressing cycle. The pressing plate has a constant pressure feature, which locks the pressing plate in place to further compact material, without any additional electrical use. The E319 electric baler features a magnetic safety switch and inductive sensors, additionally, customized functions can easily be switched on/off. This unique construction allows for the smaller height, while still featuring a large feed opening and heavy bale weight.As it is powered by electricity, without using hydraulics, the E319 baler is suitable for locations that do not already have a source of compressed air. The lack of hydraulics mean that the E319 operates quietly, without interfering with the natural workflow, and can be located in hygiene sensitive areas. At just 1.85 metres high, the E319 electric baler has a low working height and can be installed in most locations with relative ease.
The E619 Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a large volume of waste cardboard and plastic packaging material.
High compaction pressure
Low: Total machine height just over 2m
Electric: quiet & free from hydraulics
Constant Pressure: Locks pressing plate in place
Easy-open: User-friendly door for simple loading
Product Overview
The Electric E619 is a high capacity electro-mechanical baler that is ideal for large volumes of waste cardboard and plastic packaging.It has a large door opening that facilitates large boxes or bags of plastic packaging, and the spindle-driven pressing plate compacts material with up to 25 tons of pressing force. Eight hooks are built into the walls of the chamber to hold compacted material in place.With a total height of just 2.07m, the E619 can be installed in most locations and, operating at approximately 65 decibels, operates relatively quietly without interrupting the working environment.The control system for the E619 electric baler is a simple and modern design. In addition, the normal pressing cycle, it can also be set to 'auto-start' or to 'constant pressure', which locks the pressing plate in place to further compact material, without additional electrical use.In accordance with EN16500 safety standards, the E619 features a magnetic safety switch, inductive sensors and additional safety elements to ensure user safety.
Design. The fully automatic face mask production system designed for robust high-production mode.
Material. You can combine materials to achieve face masks with needed for you requirements �¢?? for medical or everyday use. Face masks. You receive multi-layer face masks of non-woven fabric, filter cotton or filter paper, nose rib, elastic ear string.
Production. 3000 per hour
Dimensions (L*W*H). 3500*6900*2000
Weight. 1tn.
Power consumption. 8kwh
Warranty. 24 months
After-sales support. We provide installation support and training on site, if requested and after-sale maintenance services.
The device is designed to be used for paper rolls with a width from 60 to 120, possibly wider, with a depth of 40-70� mm� and more without a feed conveyor, min.� height depends on the filling of the box, to which 100 mm must be added for pulling through with tapes and folding, max.� height without feeding conveyor up to 350 mm.
Complete set:
Length ~2500 mm / width ~1000 mm / height ~1500 mm\\.
Working height: 1150 mm.
Motors: 2 pcs.
Conveyor belts.
Frequency converter: EMERSO UNIDRIVE M200.
Optical sensor: S51-PA-2-B01-PK MOQ 10.
Adhesive: HB 5010 Buhnen Klebesystem.
Total consumed electrical power: 3.5 kWt.
Automatic Packaging Line With Feeding To A Film Wrapping Machine
The line is intended for feeding skirting boards and door laths for stamping and forming packs according to specific parameters
Modifications are possible according to the customers needs and dimensions of boards
Programs 9 and more
Cooperation with
FESTO
MOTOWARIO
WILLSENSOR
SIEMENS
INDUSTRYPLAST
TECHVITAS
The line is designed to simplify the overturning, crushing, weighing and transport of finished products to the warehouse. With this equipment you can safely transport and weigh the product, which simplifies the work process and saves human resources that are essential for the company and use human resources in another essential place.
Packing ~ up to 35 Pack / min
Power ~ 3,2kW
Air pressure in operation ~ 5 Bar
Block form tipping  ~ 2.5pcs / min
353 Aluminum Machinery Suppliers
Short on time? Let Aluminum Machinery sellers contact you.
