Elgiloy alloy property data sheet - product availability and request a QUOTE! :(Composition (Nominal): 40cobalt-20chromium-16iron-15nickel-7molybdenum ;( Elgiloy® alloy exhibits high strength, ductility, fatigue life, and good mechanical properties. Corrosion resistant in numerous environments.:(Specifications: ASTM-F1058):(1. Mechanical Property can be improve with Cold Worked & Aged process; (2. Rod forms fully compliance with chemical component; :(3. Annealed possible for wire & Strip
SOFT MAGNETIC - IRON COBALT ALLOY Permendur 49 : (Composition (Nominal): Fe49; V2; Co49:) :(PERMENDUR 49 exhibit the highest magnetic saturation (2.4 T) of all soft-magnetic alloys. high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss. : (Specifications: ASTM A801 Alloy Type 1 ; ( Please request a QUOTE for material Datasheet ?
COBALT CHROMIUM ALLOY ELGILOY :(Composition (Nominal): 40 Co ., 20 Cr., 15 Ni , 7 mo , Fe Balance ;( ELGILOY alloy exhibits high strength, ductility, fatigue life, and good mechanical properties. Corrosion resistant in numerous environments.:(Specifications: ASTM-F1058):(1. Mechanical Property can be improve with Cold Worked & Aged process; (2. Rod forms fully compliance with chemical component; :(3. Annealed possible for wire & Strip ;: (Product availability and request a QUOTE!
It is a cobalt-based alloy that is resistant to wear and corrosion. The first cobalt-based alloy was a cobalt-chromium binary alloy, which was later developed into a cobalt-chromium-tungsten ternary composition, and then later did the cobalt-chromium-molybdenum alloy develop. Cobalt-chromium-molybdenum alloy is a kind of alloy with cobalt as the main component, containing a considerable amount of chromium, molybdenum and a small amount of nickel, carbon and other alloying elements, and occasionally also containing iron. contact us for more information.
SOFT MAGNETIC IRON COBALT ALLOY Hiperco 50A ; (Composition (Nominal): Fe49, V2 , Co 49, :)Hiperco 50A Alloy is an iron-cobalt-vanadium soft magnetic alloy which exhibits high magnetic saturation (2.4T), high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss. :) Specifications: ASTM A801 Alloy Type 1 ;( Product availability and request a QUOTE!
Name of product : Cobalt Concentrate 10-20% and Cobalt Hydroxide 24-26% and grade 8-10%. Price of product : LME Cobalt x Co% x payable % on dry basis ex-warehouse Zambia. Exact payable % to be determined for quality required. Product origin : Zambia Key Specifications/Special Features Harmonization System (HS) Code : Minimum Order Size : 500 mt, but up to 2000 MT per month Packaging details : Big bags
F-75 Cobalt bearing sludge 100,000 pounds More details upon request
IRON-COBALT VANADIUM ALLOY - P6 Alloy ; (Composition (Nominal) 6.00 Ni, 45.00 Co, 4.80 V, Bal. Fe; ) :(A ductile, semi-hard magnetic alloy which has been used in laminations for hysteresis motors. Alloy exhibits highest efficiency (loss per unit magnetic field strength) of any known material. :(Product availability and request a QUOTE!
I would like to Introduce New Item, Tungsten Cobalt Alloys available.Offer Summary: 1) Chemical Component: Tungsten (W) 67.1% + Cobalt (Co) 26.17% Alloys 2) Country of Origin: China 3) Price: FOB (kindly request buyer target price per kg) As you know well this Tungsten Cobalt Alloys is very Important Raw Material. Tungsten-Cobalt Alloys, often referred to as Cemented Carbides or Hard Metals, are materials that combine tungsten Carbide (WC) with Cobalt (Co) as a binder. These alloys are renowned for their exceptional hardness, wear resistance, and strength, making them indispensable in industrial and machining applications. A. Key Features:1) Hardness:Tungsten carbide provides extreme hardness, enabling these alloys to cut, grind, or drill even the hardest materials.2) Toughness: The Cobalt binder gives the alloy ductility and toughness, preventing brittleness and allowing it to withstand impacts. 3) Wear Resistance: These alloys resist abrasion, making them suitable for prolonged use in high-stress environments.4) Thermal Stability: They can maintain their properties at high temperatures, making them ideal for cutting tools and machinery. B. Common Applications:1) Cutting Tools: Used in milling, drilling, and turning tools for machining metals and alloys.2) Mining and Constructions: Drill bits, cutting edges, and excavation tools.3) Aerospace: Precision machining of hard-to-work materials like titanium and Inconel.4) Wear-Resistant Parts: Dies, punches, and wear inserts in various manufacturing industries.5) Medical Devices: Surgical tools that require precise cutting and wear resistance. C. Composition: - Tungsten Carbide (WC): Provides hardness and wear resistance. - Cobalt (Co) Serves and a binder, giving toughness and enhancing the alloy's performance under mechanical stress. - Optional Additives: Elements like titanium carbide (TIC) or Tantalum Carbide (TaC) are sometimes added to tailor properties for specific applications. D. Manufacturing Process: 1) Powder Metallurgy: - Tungsten carbide powder is mixed with cobalt powder. - The mixture is pressed into desired shapes under high pressure. - The Material is sintered as high temperatures to bond the tungsten carbide particles with cobalt. 2) Finishing: - The Final product is often ground or polished to active precision tolerances and smooth finishes. E. Advantages and Disadvantages: 1) Advantages: - High hardness and strength - Excellent wear and corrosion resistance. - Long Lifespan under extreme conditions. 2) Disadvantages: - Expensive due to Tungsten and Cobalt costs. - Brittle compared to softer materials. If you are interested in please send us your LOI with your requirements, including your target price on FOB basisof course short information about your business activities. NB International
MF: Ni:Cr:Co Chemical Name: Nickel Chromium Cobalt Alloy Nanoparticles Purity: > 99.99% APS: < 80 nm (Size Customization possible) Form Nanopowder Product Number: NCZA126 CAS Number 7440-02-0 / 7440-47-3 / 7440-48-4
Electrolytic Cobalt , Cobalt Cathode Cobalt metal sheet scrap with SGS factory delivery Cobalt metal powder Cobalt Powder pure 99.99% 1.35um With particle size of 0.8-1.5m, and loose packi Purity: 99.95% min. Size as follows: full plate: 950~970-800~830mm cathode (cut): around 50*50*7 mm Noted: other purities and size available upon request
UNS N06059,alloy 59,nickel and cobalt alloy 2.4605,nicrofer 5923 hMo Available UNS N06059,alloy 59,nickel and cobalt alloy 2.4605 tube products forms as straight,coiled,seamless,seam welded,cold redrawn and annealed,typical manufacturing specifications ASTM B619,B622,B626,fittings B366,SB-366,plates,sheets B575,SB-575, forging bars,rods,stocks SB-564 , SB-574 , SB-462 ,SB-472
SOFT MAGNETIC ALLOY - HIPERCO 27 :) Composition (Nominal): Co 27 ; Cr 0.5 ; Fe Balance ; A ductile-high-magnetic saturation alloy which has been used in magnetic flux-carrying members, magnetic pole caps, and laminations for aircraft motors and generators. ; :) Specifications: ASTM A801 Alloy Type 2
Cobalt metal sheet scrap with SGS factory delivery Cobalt metal powder Cobalt Powder pure 99.99% 1.35um With particle size of 0.8-1.5m, and loose packing Product name: cobalt plate, cobalt sheet Material: 99.9% min cobalt Size: thickness: 0.025mm min Width: 600mm max According to your request Technique: cold-rolled, hot-rolled Condition: annealed Applications: chemical industry, mechanical equipment, chemical engineering
1. Product name: Cobalt powder 2. Purity: 99.9%min 3. Particle size: 50nm, 5-10um, 325mesh, etc 4. Cas No: 7440-48-4 5. Appearance: gray black powder Characteristic. Cobalt powder is gray and irregular, soluble in acid, magnetic, easy to oxidize in wet air. It is widely used in aviation, aerospace, electrical, mechanical manufacturing, chemical and ceramic industries. Cobalt based alloys or cobalt containing alloy steels are used as high temperature heat-resistant parts and important metal materials in atomic energy industry as blades, impeller, conduit, jet engine, rocket engine, missile component and chemical equipment of turbine. As a binder in powder metallurgy, cobalt can ensure the toughness of the hard alloy. Magnetic alloys are indispensable materials in modern electronics and mechanical and electrical industries, which are used to make various components of sound, light, electricity and magnetic materials. Cobalt is also an important part of permanent magnetic alloys. In chemical industry, cobalt isused in high alloy and anticorrosive alloy, and also used in colored glass, pigment, enamel, catalyst and desiccant. Application -Water atomized cobalt powder has a relatively coarse grain size, which can be used in welding materials to improve its toughness, impact resistance and wear resistance. -Reduced cobalt powder is in fine size and high purity, can be widely used in diamond tools, powder metallurgy,
Cobalt oxide (Co203) is an expensive cobalt oxide with a theoretical cobalt content of 71.06%, an oxygen content of 28.94%, and a density of 6.079/cm3. It is a black amorphous powder that generates cobalt oxide (Co304) after heating. Cobalt oxide is an unstable compound and cannot be freed. The cobalt oxide commonly referred to actually still contains a certain amount of cobalt tetraoxide. Co203 is only stable in a hydrated state. This hydrate will dehydrate and transform into the intermediate oxide cobalt tetraoxide (Co304) at 265�°C. Cobalt oxide is reduced to cobalt tetraoxide (Co304) by H2 at 125�°C, reduced to CoO at 200�°C, and reduced to cobalt metal at 250�°C. Cobalt oxide is insoluble in water. After dissolving in water, it decomposes into hydrates when it encounters water. It is insoluble in water, but soluble in acid and forms corresponding salts.
Our nickel and cobalt-base alloys are produced by an advanced patented technology, providing many superior mechanical and technological advantages; free samples are available; our products are ce-marked by sgs - london under iso13485;iso 90001
Based on technology innovation and professional service, ACME provides high-end industrial heating equipment for customers in various fields, such as C & SiC composites industrial heating equipment, vacuum heat treatment equipment, powder metallurgy industrial heating equipment, cemented carbides equipment, Fe & Cu based PM equipment, 3D printing powders, with annual turnover of over 300 million yuan.
PHYNOX alloy property data sheet - product availability and request a QUOTE! :(Composition (Nominal): 40cobalt-20chromium-16iron-15nickel-7molybdenum ;( PHYNOX alloy exhibits high strength, ductility, fatigue life, and good mechanical properties. Corrosion resistant in numerous environments.:(Specifications: ASTM-F1058):(1. Mechanical Property can be improve with Cold Worked & Aged process; (2. Rod forms fully compliance with chemical component; :(3. Annealed possible for wire & Strip
Based on technology innovation and professional service, ACME provides high-end industrial heating equipment for customers in various fields, such as C & SiC composites industrial heating equipment, vacuum heat treatment equipment, powder metallurgy industrial heating equipment, cemented carbides equipment, Fe & Cu based PM equipment, 3D printing powders, with annual turnover of over 300 million yuan.
