The buyer would like to receive quotations for -
Product Name: Fiatagre G 210 Tractors Gear Box
Quantity Required : 100 Unit/Units
Shipping Terms : CFR
Destination Port : Bangladesh
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Sohrab Bin Hossain
Please quote for the following wholesale product requirement -
Product Name: Hydraulic Oil And Gear Oil
Specifications:
Quantity: 210 Liters
Quantity Required : 210 Liter/Liters
Shipping Terms : CIF
Destination Port : India
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Sri Lanka
Contact : Digantar Thorat
D2, jp54, mazut, rebco, lng, lpg, crude oil, urea, dap, npk, gasoline, d6, ethylene glycol, mixed aromatics solvents, engine oil, gasoline motor oil non detergent, oehc nd 40 & nd 50, gasoline motor oil sn, diesel motor oil, gear oil, hydraulic oil, oehc iso r&o 32, 46, 68, oehc aw 32, aw 46, aw 68, grease, oehc lithium ep mp2 (amber), oehc hi temp mp2 (red), atf fluids, oehc atf dexron iii/ mercon, oehc atf mercon v, tractor fluid, oehc tractor fluid j 20c, heavy equipment, transmission fluids, oehc to 4 sae 30, 50
The buyer would like to receive quotations for -
Product: Mosquito Warping Knitted Fabric Material PES
Specifications:
Fiber Material: 100% Polyester Filaments
Yarn Fineness: Laying Bar 1 to 3: 6.7 tex to 8.33 tex, semi-matte
L1: 1+-0/0-1//
L2 0-0/1-1/0-0/3-6/2-2/3-3//
L3: 2-2/1-1/2-2/0-0-1-1/0-0//
Stitch Row Density: 210/10 cm
Stitch Column Density: 90/10 cm
Area Weight: (58 +6) g/m²
The light mesh size of 1 mm x 1 mm (-10 %) must be strictly adhered to.
2.3 Finishing
2.3.1 Dyeing
2.3.1.1 Color of the finished warp knitted fabric:
Bronze green, RAL 6031-F9 as a reference
2.3.1.2 Dyeing Process: Yarn dyeing or piece dyeing
Width : 172,5 cm +1 cm
Quantity Required : 8000 - 16000 meters first trail
Quantity Required : 8000 - 16000 Meter/Meters
Shipping Terms : CIF
Destination Port : Germany, Germany
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Tobias Trommer
Please quote for the following wholesale product requirement -
Product Name: Tight Head Steel Drums
Specifications :
Quantity : 35 Million Barrels With in 4 months
Size: 210L
Specification: :
Classification : Close & Open Top ( Lined / Unlined )
Steel Quality: Prime grade cold rolled steel, as per JIS G 3141 SPCC â?? SD
Normal Drum Capacity: 210 Liters (55 Gallons)
Steel Thickness (Body) : 0.7mm - 1.4mm
Steel Thickness (Top & Bottom) : 0.7mm - 1.4mm
External Height :883 mm +/- 3 mm
External Diameter: 592 mm +/- 2 mm
Internal Diameter : 572 mm +/- 2 mm
Hoops :Two Rolling Hoops
Corrugation: Set of 4 Corrugation on either side or rolling hoops expanded in the body
Bungs: Two sets, fitted to the top of the drums ( Excluded in Open top)
Bungs Size (Large) : 2
Bungs Size (Small) : 3/4
Color: As per customer's standard ( 2 - Colors / 3- Colors)
External Surface : Painted with specially formulated Stoving Enamel Paint to the color specified by customer
Internal Surface : 1. Plain 2. Primer Coat 3. Single or double coat of Epoxy Phenolic Lacquer Lining
Top & Bottom Seam : Triple Seamed
Body Seam : Electrically Welded
Quantity :1000000000 to 15000000000 Drums
Delivery : Saudi Arabia Dammam-KSA
Delivery price : $5
Transport Conditions : CPT
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Dammam-Ksa, Saudi Arabia
Payment Terms : LC, TT
Looking for suppliers from : Worldwide
Contact : Rajnikant J Parekh
Buyer is interested to receive quotations for the following RFQ -
Product Name : Tight Head Steel Drums
Specifications :
Classification : Close & Open Top ( Lined / Unlined )
Steel Quality: Prime grade cold rolled steel, as per JIS G 3141 SPCC â?? SD
Normal Drum Capacity: 210 Liters (55 Gallons)
Steel Thickness (Body) : 0.7mm - 1.4mm
Steel Thickness (Top & Bottom) : 0.7mm - 1.4mm
External Height :883 mm +/- 3 mm
External Diameter: 592 mm +/- 2 mm
Internal Diameter : 572 mm +/- 2 mm
Hoops :Two Rolling Hoops
Corrugation: Set of 4 Corrugation on either side or rolling hoops expanded in the body
Bungs: Two sets, fitted to the top of the drums ( Excluded in Open top)
Bungs Size (Large) : 2
Bungs Size (Small) : 3/4
Color: As per customer's standard ( 2 - Colors / 3- Colors)
External Surface : Painted with specially formulated Stoving Enamel Paint to the color specified by customer
Internal Surface : 1. Plain 2. Primer Coat 3. Single or double coat of Epoxy Phenolic Lacquer Lining
Top & Bottom Seam : Triple Seamed
Body Seam : Electrically Welded
Quantity :1000000000 to 15000000000 Drums
Delivery : Saudi Arabia Dammam-KSA
Delivery price : $5
Transport Conditions : CPT
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Saudi Arabia
Payment Terms : LC TT
Looking for suppliers from : Worldwide
Contact : Heba Asfar
Please quote for the following wholesale product requirement -
Product Name: EPS Raw Material Expanded Polystyrene
Specifications:
EPS Raw Material For Low-Density
EPS PEADS (For Filling Bean Bags). looking to reach expanded beads of 10 g/l (even 9 g/m)
Quantity Required : 1 Twenty-Foot Container(sample)
Shipping Terms : CIF Or FOB
Destination Port : France
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Jalabert Aymeric
Plastic resin like ABS, SAN, EPS, EVA, PP, GPPS, HIPS, MB, PC resin
Please quote for the following wholesale product requirement -
Product Name: Drilling Fluids Chemical Glo Ep 3000
Specifications :
210 Lit., Barrels, 40’ or 53’ FCL, Specification, MSDS Sheet, And Potential Qty Discount
Quantity Required : 210 Liter/Liters
Shipping Terms : CIF
Destination Port : Dubai, United Arab Emirates
Payment Terms : T/T Or L/C
Looking for suppliers from : Worldwide
Contact : Anthony Mitrovie
Please quote for the following wholesale product requirement -
Product Name: Life Saving Products
Specifications:
Type: Lifebuoys, Lifejackets, Head Gear, Respiratory Mask, Oxygen Cylinder
Color: MB Green
Size: S, M, L Shelf
Flame Retardant: ISO11612
Packaging Terms : Standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : FOB
Destination Port : Rotterdam, Netherlands
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Meno
Please quote for the following wholesale product requirement -
Product Name: Beef Tallow
Specifications:
Industrial Grade Beef Tallow ( for Soap)' * Spec- @ Total Fatty matter .98% @Moist + Impurity < 1 % Saponification Value: 190-210 KOH/g @Acid Value < 10mg KOH/g @ Smell : Specific
Quantity Required : 1000 - 2000 Metric Ton/Metric Tons Monthly
Shipping Terms : CIF
Destination Port : China
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Cheah
Buyer is interested to receive quotations for the following RFQ -
Product Name: Gear Pump with Motor
Specifications :
1178 BM-001 FOR P.R. ENG-112
For Building Maintenance
1. Unit Electric Jack Hammer Impact Energy 28.8J ( 21.24FT-LB) Continues Rating Input 1.510W Impacts Per Minute (IPM) 1450 Dimensions 652 X 121 X 231MM (25-3/4"x 4-3/4’,x9-l/8") 15.1KG (33.3 LBS) (LxWxH) Net Weight Power Supply Cord 5.0M ( 16.4FT) Inclusions: 1 X Makita HM1306 28.8 J Demolition Hammer 30mm Hex Shank 1510W, 1X Bull Point, 1X Bit Grease, 1X Side Handle, 1X Manual Brand: Makita Hm3106 Or Equivalent
1313BM-005 FOR P.R. BLR-003
For Replacement of I-main/excess belt conveyor
152 mtrs Belt conveyor Black rubber 1825mm (72") X 15mm thickness, 5 ply (5rmm) Top 7mm, Bottom 3mm EP-200
140 mtrs Belt conveyor Black rubber 915mm (36’’) X 15mm thickness, 5 ply (5rmm) Top 7mm, Bottom 3mm EP-200
1375 BM-008 FOR P.R. REF-018
F0R Cooling Fan Of Vacuum Pan Stirrer
3 units Motor Cooling Fan With Casing Model/Series: G-250A Outer Diameter: 480MM Motor SUPPLY: 440Vac, 3PH, 60Hz, O.37KW
1396 BM-008 FOR P.R. REF-024
Additional Blower For Bagging Station & Mcc Panels.
5 units AXIAL FAN 300W, 2.05A 200-240Vac, 50-60HZ, 1280RPM, IP54 Insulation Class: 130 MODEL: R10R-45APB-ES50B-09C05 BRAND: Hidra Rotomatika
1390 BM-008 FOR P.R. REF-025 For White Basket Regen Filler Spare.
6 pcs Wire Wound Resistor, Axial, 200watts, 0.1 OHM, 5% ARCOL HS 200 R1J
1412/13 BM-008 FOR P.R. REF-032
ITEM #1: For Replacement Of Fondant Ball Mill Steel Balls; Item #2- For Replacement Of Worn-out/damaged Ball Mill For Fondant Preparation.
1,500 Pcs ball Steel SS316 10MM MCM 96415K777
1 set Ball Mill Geared Motor With Complete Set HS 0.37KW, 7L CAP
1367 BM-008 FOR P.R. REF-021
For Refinery Cooling Tower & Motor Pool Deepwell Submersible Spare &
For the purpose of Replacement Of Borrowed Unit @ Pollution Control Department.
3 units Pump Motor Submersible 10HP, 440V, 3P, Max Flow 150 GPM, size 6", discharge connection: 3 inches NPT, Pump Brand: Shakti QF50-5 Motor Brand: Franklin
1371 BM-007 FOR P.R. BLR-011
For Bigelow,TES,JTA1,& JTA2 Bagasse Distribution Monitoring
15 pcs Pressure gauge glycerine filled 0-15 KPA 100mm face diameter 3/8 NPT bottom connection Brand: WIKA or Equivalent
1275 BM-006 FOR P.R. REF-006 For Refinery Bagging Room (modular Belt) Conveyor Drive Spare.
2 units Geared Motor Reduction Gear # 6531595-048 NMRV-P075 115.00 MOTOKW: 1.5 KW RPM: 1740 RPM V: 440 V-480 V, Gear Ratio = 15, Shaft dia. = 28mm, keyway = L - 120mm, W = 8mm, H = 3.5mm.
2 units Geared Motor Reduction Gear # 6531595-048 NMRV-P075 120.00 MOTOR KW: 1.5 KW V: 440 V-480 V Gear Ratio = 25. Shaft dia. = 28mm, keyway = L - 120mm, W = 8mm, H = 3.5mm.
1274 BM-006 FOR P.R. REF-007
Additional Pump For 1st, 2nd & 3rd Stage Aeration Pump. Intended To Be Installed Next Off-season Repair 2022-2023 As Project. Since The Existing Pump/motor Is A Singi F SFT-IJP
3 units Pump Centrifugal With Motor & Base Plate Pump Model: 50-32 CPX 200 Q: 7.3 M3/HR H: 70M NO: 570442-012-01 Brand: Flowserve Ltd. Or Equivalent Motor KW: 7.5 KW V: 440 V - 480 V RPM: 1740RPM
1273 BM-006 FOR P.R. REF-008
OFF-SEASON REPAIR 2022-2023 PROJECT
For the purpose of Additional Pump For Mid & Low Brix Pump. Intended To Be Installed
NEXT OFF-SEASON REPAIR 2022-2023 As Project. Since The Existing Pump/motor Is A Single SET-UP.
2 Units Pump Centrifugal With Motor & Base Plate Pump Model: 32-20 CPX 200 Q: 7.3 M3/HR H: 70M NO: 570442-011-01 Brand: Flowserve Ltd. Or Equivalent MOTOR KW: 2.2 KW V: 440 V - 480 V RPM: 1700 RPM
1106 BM-075 FOR P.R. FAB-256
PO 11-039 ITEM #1 – For High Grade Wash Water Pump (hot Water); Item #2 – For Process Water Pump (hot Water):
1 Unit Pump Motor Centrifugal Type: Single stage, double suction Capacity: 25 m3/hour Motor Drive: 15 HP, 1765 RPM TDH: 40 feet
2 Units Pump Motor Centrifugal Type: Single stage, double suction Capacity: 800 GPM Motor Dri
Please quote for the following wholesale product requirement -
Product Name: Stearic Acid
Specifications :
Acid Value Min.160-max.210 Mgkoh/g
Iodine Value Min.0-max.5 G/100g
Titre Min.48-max.55 C
Lovibond 51/4y Min.0,0-max.30,0
Lovibond 51/4r Min.0,0-max.3,0
Quantity Required : 20 Ton/Tons
Shipping Terms : CIF
Destination Port : Romania
Payment Terms : L/C
Looking for suppliers from : Europe
Contact : Simona Marcu
Please quote for the following wholesale product requirement -
Product Name: Clear Epoxy Resin
Specifications :
Epoxy Equivalent(g/mol):184-194
Hydrolysable Chlorine, wt % =:0.1
Viscosity (MPA. S25 ?):11000-14000
Volatile, wt % =:0.2
Color(Platinum-cobalt) = 100
EINECS No.:210-898-8
MF: c6h7no2
CAS No.:7085-85-0
Grade: CYD-128
Quantity Required : 5 Forty-Foot Container
Shipping Terms : CIF
Destination Port : Bulgaria
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Georgi Lutskanov
The buyer would like to receive quotations for -
Product Name: Steel Drums
Specifications :
Steel Thickness: 0.7MM -1.4MM
Streel quality: prime grade cold rolled steel as per JIS G SPCC-SD
Normal Drum Capacity: 210 liters (55 gallons)
Height: 883MM +/- 3MM
Looking supplies from GCC Countries like UAE, Oman, Qatar and Bahrain
Packaging Terms : Standard
Quantity Required : 200 - 400 Dram/Drams
Shipping Terms : By Road
Destination Port : United Arab Emirates
Payment Terms : Bank Transfer
Looking for suppliers from : United Arab Emirates
Contact : Ivy Agacer
The buyer would like to receive quotations for -
Product Name: Chlorinated Paraffin
Specifications:
70, For Rubber Industry Use
Appearance: White To Yellowish Powder
Chlorine Content [%]: 70-73
Softening Point [*C]: 90-120
Thermal Decomposition [*C]: 180-210
Moisture [%]: 0.1
Acid Value [mgKOH/g]: 0.1
Fineness [40mesh] [%]: 95
Thermal Stability [175*C,4h] [%]: 0.1
The goods must have a Reach registration certificate.
Quantity Required : 1 Twenty-Foot Container(sample)
Shipping Terms : FOB
Destination Port : Constanta, Romania
Payment Terms : L/C
Looking for suppliers from : Europe
Contact : Simona Marcu
Please provide a quotation to the following requirement from the importer -
Product Name: Steel Drum And Barrels
Specifications:
- Steel Drums (Barrels) Item 55 Gallons Steel Barrels Material Prime Cold Rolled Steel As Per JIS G 3141 SPCC-SD Drum Capacity 210 Liters (55 Gallons) Specs External Diameter: 585 +/- 3mm Internal Diameter: 580 +/- 3mm Height: 883 +/- 3 Thickness: For Body And (Top & Bottom) 0.7. 1.4 Mm Weight Of Empty Drum: 16.2 17.8 Or 21.1 Kg Rolling Hoop: Two Rolling Hoops, Expanded, W Corrugated Body Steam: Electrically Welded Top & Bottom Seam: Seven Triple Seamed External Surface: Painted With Specially formulated stoving paint
Quantity Required : 12000000 Unit/Units
Shipping Terms : CIF
Destination Port : United Arab Emirates
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Werner Rojik
Please provide a quotation to the following requirement from importer -
Product Name: Engine Oil
Specifications :
For Diesel Engines M-14v2
Kinematic Viscosity At 1000c, Mm2 / S Norm 13.5-14.5
Viscosity Index Not Less Than 85
Flash Point In An Open Crucible, 0ð¡ Not Less Than 210
Pour Point, 0ð¡ Not Higher Than -12
Base Number, Mg Koh / G Not Less Than 4.8
Sulphated Ash Content,% No More Than 1.2
Density, At 20 0ð¡, Kg / M3 No More Than 910
Color On A Tsnt Colorimeter With A Dilution Of 15:85, Units. Cnt 4.0
Masses. Sulfur Content Up To 0.5%
Quantity Required : 4000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Ukraine
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Teo
Buyer is interested to receive quotations for the following RFQ -
Product Name: LV MV Cables
Specifications :
1. Low tension cable type YmVK-mb.0.6/1 kV NEN K42 Draka 4 x 16 mm², VULT-G
Specification : • NYCY 4 x 16 mm² RM
• Type : NYCY
• Diameter : 4 x 16 mm² RM
• Conductor : - Copper (Stranded Core)
- Conductor according to DIN VDE 0276-603/IEC 60502
• Core insulation: PVC DIV 4
• Outer Sheath : PVC Black (UV-resistant)
• Nominal Voltage (U0/U) : 0.6/1 kV
• Temp. Range : - Flexing -5°C to +50°C
- Fixed installation -40°C to +70°C
• Minimum bending radius: - For single core approx. 15x cable
- For multi core approx. 12x cable
• Core identification: Black, Blue, Brown & Grey
• Application: Entrance cable for Underground fixed installation between low voltage grid and user metering box.
• Armouring: No
Quantity : 500 meter
2. Entrance cable 2x10 mm2
Specification :
Detail Specifications: Low voltage XLPE cable 2 x 10 RM mm² Cu. 0.6/1kV.
• Type : XLPE cable
• Diameter : 2 x 10 RM mm²
• Conductor:- Copper (Round Stranded Core) - Conductor according to IEC 60228
• Core insulation : XLPE
• Outer Sheath : PE/XLPE Black (UV-resistant) or Carbon black PVC-type ST2
• Nominal Voltage (U0/U) : 0.6/1 kV
• Temp. Range : -5°C to +90°C
• Minimum bending radius: - For single core approx. 15x cable
- For multi core approx. 12x cable
• Marking printed on the outer sheath: NV EBS, Manufacturer, Cable type designation, Year and week of manufacturing, Outer sheath material designation, Length in meters • Application : Outdoor overhead aerial cable and underground cable
• Color of cores insulation : Black, Blue • Length of drum : 1000 meter • Safety : fire retardant according to IEC/EN 60332-3-24 and IEC 60502 • Test r
Please provide a quotation to the following requirement from importer -
Product Name: Low Density Polyethylene (LDPE)
Specifications :
DPE MP3425 Complies With The Requirements As Below Indicated When The Product Is Processed Using The Correct Practice And Testing Procedures
Properties
Unit
Test Method
Typical Value
Density ( Compound ) At 23ºc
G/cm3
ASTM D 792
0.934
Melt Flow rate 2,16 kg al 190ºC
g/10min
ASTM D 1238
0.25
Melt Flow rate 5kg at 190ºC
g/10min
ASTM D 1238
1.0
Carbon Black Content
%
ASTM D 1603
Greater Than 2
Vicat Softening Point
ºC
ASTM D 1525
98
Melting point
ºC
ASTM D 2117
124
Brittleness Temperature
ºC
ASTM D 746
Less Than -70
Tensile strain at break
%
ASTM D 638
22
Tensile elongation
%
ASTM D 638
Greater Than 600
Hardness
Shore D
ASTM D 2240
50
E.S.C.R. 10% igepal F50
Hr
ASTM D 1693-A
Greater Than 5000
Oxidation Induction Time 210 ºC
Min
ISO 11357
Greater Than 20
Quantity Required : 60000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Valencia, Spain
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Jorge
