Please provide a quotation to the following requirement from importer -
Product Name: Trailer Parts
Specifications:
Quantity Required: Moq
1/2" D-ring W/ Weld On Clip 4,000 Lbs Wll - 12,000 Lbs Mbs - Forged Steel - Raw 5/8" D-ring W/ Weld On Clip 6,300 Lbs Wll - 18,000 Lbs Mbs - Forged Steel - Raw Weld On Chain Retainer W/ Pin For 1/4"-5/16" Chain 10,000 Lbs Wll - Forged Steel - Raw Weld On Chain Retainer W/ Pin For 3/8" Chain 25,000 Lbs Wll - Forged Steel - Raw Gr70 Safety Chain W/ Clevis Hook 1/4" X 36" 12,600 Lbs Mbs - Zinc Plated Gr70 Safety Chain W/ Clevis Hook 5/16" X 36" 15,800 Lbs Mbs - Zinc Plated Gr70 Safety Chain ??w/ Clevis Hook 3/8" X 36" 26,400 Lbs Mbs - Zinc Plated Gr70 Safety Chain W/ Clevis Hook 1/2" X 36" 45,200 Lbs Mbs - Zinc Plated Gr30 Safety Chain W/ Spring Clip Hook 1/4" X 27" 5,200 Lbs Mbs - Zinc Plated E-track Tie Down Fitting 2" O-ring 1,335 Lbs Wll - Zinc Plated Sliding C-channel Winch 6,670 Lbs Wll - Steel - Black Sliding Double L Winch 5,500 Lbs Wll - Steel - Black Double L Sliding Winch Rail 6 Ft Section - Aluminum - Raw 4" X 30' Winch Strap W/ Flat Hook 5400 Lbs Wll - Yellow 4" X 35' Winch Strap W/ Flat Hook 5400 Lbs Wll - Yellow 4" X 40' Winch Strap W/ Flat Hook 5400 Lbs Wll - Yellow
Packaging Term: Customized
Quantity Required : MOQ
Shipping Terms : CIF, FOB
Destination Port : Mexico
Payment Terms : LC, TT
Looking for suppliers from : Taiwan
Contact : Jake Neufeld
Fasteners, nuts, bolts, washers, anchor bolts, anchor chains, bollards, marine ladders, screws, clevis pins, cotter pins, dowel pins, eye bolts, spring inserts, spacers, nails, circlips, retaining rings, e clips, rivets, studs, threaded rods, compression springs, extension springs, torsion springs, double torsion springs, flat springs, garter springs, micro springs, spring assemblies, copper coils, special springs, conical springs, dock accessories, rubber fenders, rubber bumpers, dock bumpers, mooring rope, chain tensioner, shackles, d shackles, mooring ring, eye bolts, swivels, turnbuckles, web slings, sheet metal parts, punching items, springs, raw cotton, spices, marine & dock accessories, coffee and tea powder
The buyer would like to receive quotations for -
Product Name: Pogo Pin Connector
Battery Contact ( Pogo Pin / Spring Contact Pin) With
a flat head shape (diameter 4-5mm),
a stroke of at least 3.5mm,
a maximum diameter of 6mm and
a maximum length of 13mm.
The maximum current is 0.5A at a voltage of 5V.
1000 pcs- first order
10000 pcs if product is good
Quantity Required : 10000 Piece/Pieces
Shipping Terms : CIF
Destination Port : Germany, Germany
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Bertram Henn
Please provide a quotation to the following requirement from importer -
Product Name: Surgical Microscope
Specifications :
For Eye
Type: Galilean Magnification: 4.5x, 7.5x, 11.5x, 18.5x, 29.5x Or Similar
Field Of View: Ø 49mm To Ø 8mm Illumination: Achromatic Shadow
Free Spot Light Source: Cold Light Through Fiber-optic Light Guide Bulb :
Reflector Type Halogen Bulb 15V 150W (24V 250W optional) Illumination
Field: 48mm (ø) Light Intensity: 80000 Lux Max. Filter: Various Filters Are Available
Arthroscope
Telescope: 1.2mm, 0º Direction Of View. Trocar Tube: 1.2mm Trocar
Spike: 1.2mm Accessories: Adapter With Luer Lock Male And X-mas Tree
Telescope Holder Light Quid, 3.5m With Condenser Trocar Tube For
Surgical Instruments 2mm Trocar Spike 2mm Pointed Trocar Spike 2mm
Blunt Palpation Probe 2 Mm Straight -4pcs. Palpation Probe 2mm Hook
Type -4pcs. Knife 2mm Side Cutting -4pcs. Knife 2mm Front Cutting -
4pcs. Rasp 2mm -4pcs. Biopsy Forceps 2mm -4pcs. Grasping Forceps
2mm -4pcs. Instruments Tray Shaver System
Microscope Monocular
Microscope With Metal Base With 360° Rotatable Monocular Tube, 45° Inclined
3-fold Objective Nosepiece
Separated Coarse And Fine Focus
Stage Focus Control (protection Of Sample!)
Objectives:
ACHRO 4x/0.10
ACHRO 10x/0.25
ACHRO 40x/0.65 spring
Objective 100x/1.25 oil,
Attachable Mechanical Stage, Etc.
Abbé Condenser N.a. 1.25 With Iris Diaphragm, Variable At Height
Stage With Stage Clips
Blue Filter.
Built-in Illumination 6v/20 Watt Halogen, Adjustable
Daylight Mirror For Outdoor-use
Dust Cover.
Packed In Styrofoam Case
Power Requirements: 220V / 50 Hz
Body With 6V 20W Halogen for 220V, 50 Hz.
Quadruple Revolving Nosepiece.
Sturdy, Base With Supportive Rubber Feet.
With Low Position, Coaxial Coarse And Calibrated Fine Focus Control, With Graduation
Reading 2 Microns Per Division
Total Focusing 40mm
Condenser Adjustable
Built-in Power Supply, Halogen Bulb Adjustable
Double Layer Mechanical Specimen Stage
Dust Cover, Blue Filter, Immersion Oil And Instruction Manual Included
2 Pcs. 6v 20w Halogen Bulbs Included.
Binocular Head, 30° Inclined, 360° Rotatable, Interpupillary Distance 55 – 75mm
Objectives:
ACHRO 4x/0.10
ACHRO 10x/0.2
ACHRO 40x/0.65, spring-loaded
ACHRO 100x/1.25, Oil, spring-loaded
Gastroscope (with Halogen Light Source)
Optical System :
Field Of View: At Least 100°°
Depth Of Field: At Least 4 To 100mm
Distal End: Outer Diameter: Not More Than 10mm.
Bending Section
Range Of Tip Bending: Not Less Than Up 210°, Down 90°, Right 100°, Left 100°
Insertion Tube : Outer Diameter: Not More Than 13.3mm
Working Length: Not Less Than 1025mm.
Length Markings
Instrument Channel :
Inner Diameter: Not Less Than 2.8mm
Light Source
Halogen Technology Shall Provide A High Light Intensity Of At Least 150w.
Variable Light Intensity
Fast And Easy Bulb Change During Operation: In Case Of A Bulb Failure Immediate
Switch To The Second Bulb With The Reverser Shall Be Possible. Adjustment Of
Brightness And Power With Buttons And Switches On The Front Panel.
Shall Be Connectable With Conventional Telescopes, Fiberscope.
Shall Be Adaptable To All Endoscopic Procedures
Optionally, An Automatic Built-in Swivel Mechanism Will Bring The Spare Halogen
Bulb Into Working Position
Technical Data: Halogen, 150 Watts, Halogen, 2 Pieces
Manual Switch, 2 x 150 W, 24 V
Power Supply: 220 VAC 50 Hz
Standards
CE
EC Marked
US FDA
ISO
Quantity Required : 1 - 4 Unit/Units
Shipping Terms : CIF
Destination Port : Afghanistan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : John Thomas
The buyer would like to receive quotations for -
Product : Bed Single Mattress
Specifications:
90 cm x 190 cm Mattress --- Height 6 inch or 15.25cm --- Open Coil 13.5 gauge bonnell Spring --- 800 GSM felt pad --- quilted cover --- No foam on the sides --- single side use, (not double to keep cost down) --
Roll packed Mattresses.
Target price : 20 Euros or less per unit
Qty : 1 container Trial
Later 4 to 5 full full Containers
Note : Contact Via Whatsapp
Quantity Required : 4 - 5 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : United Kingdom
Payment Terms : LC
Looking for suppliers from : Turkey
Contact : Sajad Ali
Please quote for the following wholesale product requirement -
Product Name : Hot Melt Glue Gun
Specifications :
Type : Glue Gun With Trigger Feed, Black Housing/Body, With Red Safety Cap, Include Wire Stand, European Plug And Cable With 2 Pins FOR 11,2 x 300 MM Hot Melt Glue Stick
Brass Nozzle 60W and 80W With Light And On/OFF Button
Packaging : Double blister per gun includes USER Guide / Carton
Certificate : CE certificate and test results
Quantity Required : 1 Less than Container Load/LCL
Shipping Terms : CIF
Destination Port : Singapore
Payment Terms : TT , LC
Looking for suppliers from : Worldwide
Contact : Ben
The buyer would like to receive quotations for -
Product Name : Hot Melt Glue Gun
Specifications:
Type : Glue Gun With Trigger Feed, Black Housing/Body, With Red Safety Cap, Include Wire Stand, European Plug And Cable With 2 Pins FOR 11,2 x 300 MM Hot Melt Glue Stick
Brass Nozzle 60W and 80W With Light And On/OFF Button
Packaging : Double blister per gun includes USER Guide / Carton
Certificate : CE certificate and test results
Quantity Required : 1 Less than Container Load/LCL
Shipping Terms : CIF
Destination Port : Singapore, Singapore
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Ben
Please provide a quotation to the following requirement from importer -
Product Name: Personal Protective Equipment
Specifications :
Quantity :
1. Safety Helmet Pin lock No. 1500
2. Safety Helmet Pin lock with Ventilation No. 1000
Safety Shoes for Labours No. 2000
Safety Shoes for Foreman No. 1000
3. Welding Mask No. 500
4. Clear Visor No. 300
5. Safety Vest for Labours No. 1500
6. Safety Vest for Foreman No. 1000
7. Safety Vest for Engineers No. 500
8. Coverall Polyester Size : S,M,L,XL No. 1000
9. Coverall Cotton Size : S,M,L,XL No. 1000
10. Safety Glasses White No. 1000
11. Safety Glasses Black No. 1000
12. Cut Resistance Gloves Pair 1000
13. Latex Gloves Foam Pair 1000
14. Double Dotted Gloves Pair 3000
15. PVC Gloves Pair 1000
16. Rubber Gloves Cotton Pair 1000
17. Leather Gloves Pair 1000
18. Cartrige Respirator Mask No. 1000
19. Disposable Paper Type Mask No. 1000
20. Side Mask No. 1000
21. Safety Harness No. 100
Quantity Required : 100 - 3000 Piece/Pieces
Shipping Terms : CIF
Destination Port : Doha, Qatar
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Mohammad Slim
The buyer would like to receive quotations for -
Product Name: Laboratory Equipments
Specification with Quantity -
Stainless Steel Sharp Ends Forceps – quantity 3
Chemically resistant and non-contaminating
Non-protein binding and providing bio-inert surfaces
No critical quantities lost due to sticking
No build up on surfaces
Ideal for use under severe laboratory conditions
Excellent non-wetting properties for easy cleaning and can be steam or chemically sterilized
With guide pin
Test tube
Made of Borosilicate glass material.
Uniform bottom, fire-polished rims and consistent lengths.
Suitable for all usual laboratory applications
Volume: 10 mL – quantity 100
Volume 20 mL – quantity 100
Test tube rack – quantity 5
Rack can be securely carried and are fully autoclavable
Racks remain fully orientated until they are twisted again
Use different sizes of test tubes at the same time
Tubes (6 x 15 mL, 9 x 1.5/2.0 mL, 12 x 0.5 mL, 32 x 0.2 mL)
Hi-Accuracy Thermometer – quantity 1
Available with one probe or two probes
Monitor inlet and outlet simultaneously
Thermometer – quantity 3
Water-resistant and shockproof
Stainless-steel probe is resistant to most acids, bases and solvents
Reading updates every second
Memory recall of highest and lowest temperature readings, over period of 5 hours
Silver-oxide battery included
Wide temperature range
Needles – quantity 16 box
Hypodermic needles with thin walls for optimal flow
Fits Luer slip syringes
Colour coded for quick recognition of gauge for easy selection of appropriate flow rate
Sterile and individually wrapped for hygienic, single-use application
Stainless steel needles with epoxy resin adhesives
Needle Gauge: 16G to 28G
Insulin Syringe – quantity 10 box
Individually packed
Sterilized
Use with 1 ml insulin syringe
Length: 60 mm
Sterile Syringes for Single Use – quantity 20 boxes
Sterile
Individually wrapped in a paper/plastic blister pack
Size: 5 mL – quantity 10 boxes
Size 10 mL – quantity 10 boxes
Automatic Syringe – quantity 4
Pistol grip handle.
Self-refilling automatic syringe.
Detachable Luer lock valve system.
High chemical resistance.
Corrosion resistant.
Optimal hand balance and ergonomics
Fast and reliable volume setting.
High reproducibility due to safety locking nut on a micrometric screw.
Plastic Test Tube
Provide reliable containment of laboratory fluid samples
Polypropylene tubes are best suited for applications requiring greater thermal and chemical stability
Dual-position snap caps, heavier gauge walls, and unique construction provide a secure, positive seal
Medical-style packaging materials
3,000 RCF rating (RCF claims refer to Relative Centrifugal Force measured in g-force for materials with a specific gravity of 1.0, used in an appropriate rotor with correct cushion and safety precautions. Tubes used
with organic solvents at temperatures below 0°C may have lower RCF ratings.)
Size: 15mL – quantity 1000
50mL – quantity 1000
Counting chamber /slides. – quantity 20 box
Disposable counting chamber, 20 µm depth, 4 counting areas per slide for semen concentration measurement with CASA systems ,20 PCS/BOX
Covered with a special coating to prevent air bubble formation and to prevent semen from sticking to the chamber surface.
Material non-toxic to sperm cells.
Suitable for low and high sperm concentrations.
Storage: room temperature, noncondensing conditions.
Quality control of each production batch includes: sperm compatibility, chamber height, filling capability, absence of impurities / particles that interfere with concentration measurement
Test tube: 10cm ,disposable ,plastic – quantity 10000 tube
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Bulgaria
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Lyubomira Kostadinova
Please quote for the following wholesale product requirement -
Product Name: Double A Copy Paper
Specifications:
Sheet Size:210mm x 297mm, International Size A4
Quality: Imported 100% Virgin Wood Pulp
Whiteness = 102-104%,Natural White
Capability: High-Speed Copying100ppm, Laser Capable, Inkjet Capable, Fax Capable.
Thickness: 103-110 um
Surface roughness TS ml/min: 75-175
Surface roughness BS ml/min: 100-200
Bending stiffness MD: >110 Mn
Bending stiffness CD: >50 Mn
CIE whiteness: 148-152
Cobb Test: 27-33 g/m2 27-33
Key Performance:
No jam in photocopy machine
No double feed
Stay flat after copying
Leave no dust in the copy-machine
Nice appearance-white and clean
Nice touch-smooth and bulky
No see through-print both sides
Been developed for: Photocopy Mac
Quantity Required : 1 Forty-Foot Container
Shipping Terms : CIF
Destination Port : Indonesia
Payment Terms : T/T
Looking for suppliers from : Worldwide
Contact : Radita Auto Prima
Please provide a quotation to the following requirement from the importer -
Product Name: Thermal Paper Rolls
Specifications:
- Stickers (width 70cm, lenght100cm)
- Transparent stickers (width 70cm, length 100cm)
- 2 SIDE PE COATED Paper 210g + 15g PE
- 700 mm x 1000 mm per sheet
- PE Coated Paper (cup bottom) 210g + 15g PE Roll / 63mm
- MG Bleached Kraft 32gsm /40 gsm Roll Width 50cm
- Uncoated white top test-liner 125g by roll size 80cm/100/120/140cm
- C1S coated glossy art paper by sheet 700x 1000mm
120gsm
180gsm
280gsm
370gsm
- C2S coated glossy art paper
By sheet 700x 1000mm
120gsm
180gsm
280gsm
370gsm
- Offest Paper 60 gsm recycled materials used for journals and copybooks by sheets 700 x 1000mm
- Kraft brown 125g
-Test liner paper treated double 125g ( one face brown and other white )
- Flute 125g 125hp/ 112hp and 125g
- Paper Roll 80g
Quantity Required : 1 Twenty-Foot Container(sample)
Shipping Terms : CIF
Destination Port : Lebanon
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Mona Khader
Please provide a quotation to the following requirement from importer -
Product Name: A4 Size Copy Papers
Specifications:
Gramage: 70 GSM
Quality: Imported 100% Natural Wood Pulp
Brightness = 102-104%, Natural White
Capability: High Speed Copying100ppm, Laser
Capable, Inkjet Capable, Fax Capable.
Thickness: 103-110 um
Surface roughness TS ml/min: 75-175
Surface roughness BS ml/min: 100-200
Bending stiffness MD: >110 Mn
Bending stiffness CD: >50 Mn
CIE whiteness: 148-152 or 152-165
Cobb Test: 27-33 g/m2 27-33
Two-sided usage gives the paper sheet high opacity.
Smooth paper surface makes sharp printing and copying.
Moist protected wrapper.
Moisture: 3.5%-4.5%.
Opacity: 94%.
Size: A4: 210 x 297mm.
Packaging Terms: 500 Sheets Per Ream, 5 Reams Per Carton(box).
Material: 100% wood pulp with whiteness ISO 96-100.
Key performance: No jam in photocopy machine.
No double feed.
Stay flat after copying.
Leave no dust in the copy-machine.
Nice appearance-white and clean.
Nice touch-smooth and bulky.
No see through-print both sides.
Been developed for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines.
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Kolkata, India
Payment Terms : 100% Irrevocable L/C
Looking for suppliers from : Worldwide
Contact : Anandamay Barik
The buyer would like to receive quotations for -
Product Name: JCB Backaloaders Spare Parts
Specifications :
Part Number Description Part Count
458/20353 Plate brake friction 100
458/20285 Plate brake counter 100
331/11963 Carrier Brake Plate 12
2203/0071 Circlip External 24
813/50012 Seal Brake Piston 20
813/50026 Seal Brake Piston (square section) 20
814/00365 Spring Compression 24
448/16905 Bush tension Flanged - External 24
2203/1020 Circlip 24
826/M7635 Nut Stake M30 x 2 8
904/20172 Seal Triple Lip, 8
907/09000 Bearing Roller 12
907/08300 Bearing Taper Roller 48
921/01900 Kit-shim 8
921/53400 Kit Spacer 8
458/W4742 GA Crownwheel & Pinion 13/38 5
826/01080 Bolt M12 x 60mm 70
450/26200 Differential Assembly, LSD 4
907/50100 Bearing Taper Roller 16
458/M2842 Casing Assembly Differential 5
450/20600 Gear set differential 5
808/00210 Washer thrust Pinion 20
450/20403 Plate counter 100
450/20402 Plate friction 100
450/20401 Plate pressure 12
914/89300 Driveshaft 10
904/50040 Seal 16
907/08400 Bearing 16
904/50047 Seal 20
917/50200 Bearing Needle Roller NK 45/30 20
333/H4196 Kit 20
458/20061 Trunnion 36
904/06700 Seal 50
1321/0509 Screw 24
826/01363 Stud double ended M12 X 78 X 35 X 35 24
816/60056A Nipple 40
911/22800 Pin pivot 105mm x 25mm dia. 32
904/09300 Seal oil 32
808/00253 Bush 33mm Long 30mm OD X 25mm ID 48
448/17902 Ball joint 32
904/M6779 Seal 16
907/M7473 Bearing 24
458/20403 Cover Plate Hub Seal 12
821/00494 Circlip External 12
828/00196 O Ring 16
826/01060 Bolt M14 x 70mm long 96
453/00303 Breather Nylon Black 10
448/17205 Kit-seal Track Rod Cold Climate 24
914/90640 Shaft Drive 2
333/G3318 Kit Spider 32
826/00892 Screw Special 3/8UNF X 3/4 40
448/42210 Differential Assy 5
15/920315 Kit spring 12
826/01434 Bolt verbus ripp M10 x 35mm 40
826/01586 Bolt (M8 x 80) 32
826/01472 Bolt M12 x 35mm 32
826/11174 "
Nut M12 x 1.5 Philidas 32
Quantity Required : MOQ
Shipping Terms : FOB
Destination Port : Azerbaijan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Gunay Valiyeva
The buyer would like to receive quotations for -
Product Name : Spare Parts For JCB Backaloaders
Specifications :
Part Number Description Part Count
458/20353 Plate brake friction 100
458/20285 Plate brake counter 100
331/11963 Carrier Brake Plate 12
2203/0071 Circlip External 24
813/50012 Seal Brake Piston 20
813/50026 Seal Brake Piston (square section) 20
814/00365 Spring Compression 24
448/16905 Bush tension Flanged - External 24
2203/1020 Circlip 24
826/M7635 Nut Stake M30 x 2 8
904/20172 Seal Triple Lip, 8
907/09000 Bearing Roller 12
907/08300 Bearing Taper Roller 48
921/01900 Kit-shim 8
921/53400 Kit Spacer 8
458/W4742 GA Crownwheel & Pinion 13/38 5
826/01080 Bolt M12 x 60mm 70
450/26200 Differential Assembly, LSD 4
907/50100 Bearing Taper Roller 16
458/M2842 Casing Assembly Differential 5
450/20600 Gear set differential 5
808/00210 Washer thrust Pinion 20
450/20403 Plate counter 100
450/20402 Plate friction 100
450/20401 Plate pressure 12
914/89300 Driveshaft 10
904/50040 Seal 16
907/08400 Bearing 16
904/50047 Seal 20
917/50200 Bearing Needle Roller NK 45/30 20
333/H4196 Kit 20
458/20061 Trunnion 36
904/06700 Seal 50
1321/0509 Screw 24
826/01363 Stud double ended M12 X 78 X 35 X 35 24
816/60056A Nipple 40
911/22800 Pin pivot 105mm x 25mm dia. 32
904/09300 Seal oil 32
808/00253 Bush 33mm Long 30mm OD X 25mm ID 48
448/17902 Ball joint 32
904/M6779 Seal 16
907/M7473 Bearing 24
458/20403 Cover Plate Hub Seal 12
821/00494 Circlip External 12
828/00196 O Ring 16
826/01060 Bolt M14 x 70mm long 96
453/00303 Breather Nylon Black 10
448/17205 Kit-seal Track Rod Cold Climate 24
914/90640 Shaft Drive 2
333/G3318 Kit Spider 32
826/00892 Screw Special 3/8UNF X 3/4 40
448/42210 Differential Assy 5
15/920315 Kit spring 12
826/01434 Bolt verbus ripp M10 x 35mm 40
826/01586 Bolt (M8 x 80) 32
826/01472 Bolt M12 x 35mm 32
826/11174 "
Nut M12 x 1.5 Philidas 32
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Azerbaijan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Gunay Valiyeva
The buyer would like to receive quotations for -
Product Name: Steel Billets B500B/3SP
Specifications:
Qty : 200,000 MT monthly
Grade: B500B/3SP
Process of manufacture:
process route: EAF/BOF---LRF---CCM.
Input raw material: Hot DRI/HBI + Scrap + Internal virgin scrap(as and when required).
Killing practice: Silicon killed/Aluminum killed.
Metallurgical requirements:
Color code: As agreed before contract
Range: Min% - Max%
C 0.19 - 0.22 , Mn 0.65 - 0.80 , Si 0.15 0.30 , S 0.20 , P 0.035 , Cr 0.10 , Ni 0.10 , Cu 0.05 , Sn 0.015 , B 0.0008 , As 0.015 , Sb 0.01 , N2ppm 70
CE : 0.48 max (Aim 0.31-0.36)
CE= C+ Mn/6+ (Cr +Mo +V) /5+(Cu +Ni) /15
Permissible variation in analysis for individual chemical elements will be as per ASTM A29.
Internal soundness:
- One macros sample shall be checked for every 3 heats per sequence.
- Billet macrostructure should be appropriate to produce rolled product as per C2S2R2 ASTM E381.
- Free from harmful subsurface defects like blow / pin holes, and cracks which can affect the end product quality.
- Central looseness / piping: 4mm max.
- No visible defect (piping, pin holes, crack) should be on the cross section of both ends.
Surface Quality:
Billet shall be supplied free from harmful surface defects like longitudinal/transverse cracks, pinholes, slag patches, mechanical mark etc., which can affect surface quality of the end products, Mechanical/Scratch marks with a maximum depth of Less Than = 1mm depth are allowed, defect more than 1mm should be removed by smooth grinding and width of grinding and width of grinding and width of grinding and width of grinding should be at least 6 times of depth.
Size and dimensional tolerances:
Section in mm: 150*150 - 160*160
D1-D2 in mm (max) 10
Side Tol in mm +/-4
Length in meter 12
Length Tol in mm +/-50
Bulging 4 mm max
Bend in mm 5mm/m & 60mm in entire length, no end bend allowed
Ends Cut deviation 5mm max.
General :
- Billet ends will be Gas cut which should be straight.
- Burrs if present should not be more than 5 mm of thickness and 25 mm width
- Billet should be from current production and rust if present should be superficial
Certification:
The test certification will contain
- Supply condition
- Process of manufacturing
- Steel grade
- Heat number(cast number) , length, no of pieces and weight
- Chemical composition
- Declaration for free from radioactivity
Identification:
- Heat no./grade/length will be painted on one end of each billet with a specific color code Please let us know if there is any additional information you require from our end to proceed with this inquiry.
NO Parameters Unit Specs
1 T.Fe % 65.00 Min
2 SiO2 %
3 Al2O3 % 6.00 Max
4 CaO % 0.65 Typical
5 MgO % 0.04 Typical
6 P % 0.06 Max
7 S % 0.0040 Max
12 Moisture % 2.50 Max
21 Less Than 5.0 mm % 1.0 Max
22 T.I.(+6.3mm) % 94.0 Min
23 A.I.(-0.5mm) % 3.0 Max
24 CCS Kg/P 280 Min
26 Porosity % 23% Min
28 Mean Size mm 13 mm
Quantity Required : 200000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Oman
Payment Terms : L/C
Looking for suppliers from : Indonesia
Contact : Soheil Damaj
