Please quote for the following wholesale product requirement -
Product Name: High Density Polyethylene
Quantity Required : 500 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Turkey
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Contact Pazha Intl
Linear Low Density Polyethylene Lldpe.
Please quote for the following wholesale product requirement -
Product : Two high density polyethylene (HDPE), 80 microns Thick Inner Bags
Specifications:
Purdue Improved Crop Storage (PICS) bags for simple, low cost method of reducing post-harvest grain losses due to bruchid/insect infestation
Technical Specifications: Type, weight and dimensions
PICS bags made of:
1.1 Two high density polyethylene (HDPE), 80 microns thick inner bags
1.2 One polypropylene (PP) woven outer bag
1.3 Suitable for storing grain and seed without using chemicals to control insect pests
1.4 Condition: New
1.5 Capacity: 100kg
1.6 Dimensions: 70 cm x 135 cm (Approx.)
1.7 Capable of storing a variety of legume and cereal crops for more than one year after harvest
1.8 Able to provide hermetic condition when sealed or tied
1.9 Water resistant
1.10 Colour: Transparent inner bags and White outer bag
2.0 Technical Specifications: Marking
The woven outer bags should be clearly and indelibly marked with the following:
2.1 Manufacturers name and/or trademark.
2.2 PICS (Purdue Improved Crop Storage) in English as shown in Figure 1 bellow
3.0 Technical Specifications: Packing
3.1 They must be protected from damage during shipment
3.2 They should be packed in bundles of 300 bags
6.0 Warranty:
The minimum requirement is for a twelve months warranty period.
Quantity: 30000 bags
Quantity Required : 30000 Bag/Bags
Shipping Terms : CIF
Destination Port : India
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Naveen Rawat
Virgin raw materials (non recycle type) high density polyethylene (hdpe ); polypropylene ( pp ); polycarbonate (pc) and acrylonitrile butadiene styrene (abs). qty order avg 1000 m ton/mth when supply is smooth.
Ldpe (Low Density Polyethylene) No Additive And Lldpe.
Buyer is interested to receive quotations for the following RFQ -
Product Name: Solar Panels
Specifications:
Type :
Batteries , Inverters
80 MEGA WATT
Quantity :2,000 to 3,000 solar panels,
Setting up a 80 MW (megawatt) off-grid solar system in UNHCR camps in East Africa.Below is a breakdown of the key components needed to design and implement an 80MW off-grid solar power system Using an example of 1Mw. You are free to add or adjust.
1. Solar Panels (Photovoltaic Modules)
• Capacity: To generate 1 MW, you would typically need around 2,000 to 3,000 solar panels, depending on the wattage of each panel.
o For example, if each panel has a capacity of 300 watts, you will need approximately 3,334 panels (1,000,000 watts / 300 watts per panel).
• Panel Type: The most common types are monocrystalline and polycrystalline, with monocrystalline being more efficient and often used in large-scale projects.
• Total Capacity: Panels must provide enough energy to meet the daily needs of the system, considering off-grid operation without relying on the grid.
2. Inverters
• DC to AC Inverters: These convert the DC power generated by the solar panels into AC power, which is what most appliances use.
• Inverter Size: For a 1 MW solar system, you will need inverters that can handle 1 MW of power. Typically, this means installing inverters that are slightly larger than the system’s nominal output capacity to handle peak loads.
• Number of Inverters: A 1 MW solar system may require multiple inverters (e.g., 2 x 500 kW or 4 x 250 kW inverters), depending on the configuration.
3. Battery Storage (Energy Storage System)
• Battery Type: Lithium-ion, lead-acid, or other advanced battery technologies can be used. Lithium-ion batteries are commonly used for large-scale solar off-grid systems due to their higher energy density and efficiency.
• Battery Size: To store the energy generated by the solar panels for use during night-time or cloudy days, a large battery bank is needed.
o For example, if the system needs to run 24/7 with a 5-hour backup requirement, you'd calculate the battery bank size based on your daily energy consumption.
o Example: For a 1 MW system that operates 24 hours a day, it would need to generate around 24 MWh daily. Depending on your backup requirements, this could mean needing a battery bank that stores anywhere from 5-10 MWh or more.
4. Charge Controllers
• Function: Charge controllers regulate the charging of batteries to ensure they don’t overcharge or undercharge, prolonging battery life.
• Type: MPPT (Maximum Power Point Tracking) charge controllers are typically used in large solar systems to optimize the energy harvest from the solar panels.
• Sizing: The charge controller should match the system's capacity. For 1 MW systems, you will need a high-power charge controller, and multiple controllers may be necessary depending on the number of panels and battery bank configuration.
5. Mounting Structures
• Function: These are the physical structures that support the solar panels, ensuring they are securely mounted.
• Types: Fixed tilt or tracking mounts.
o Fixed Tilt: More common in regions with consistent sunlight.
o Tracking Mounts: Move the panels to follow the sun, increasing efficiency, but at a higher initial cost.
6. Cabling and Wiring
• DC Cabling: Connects the solar panels to the inverters and charge controllers.
• AC Cabling: Connects the inverters to the battery bank and loads.
• Sizing: Wiring should be appropriately sized to handle the current and minimize energy loss. In high-power systems, large cables and low-resistance wiring are important.
7. Disconnects and Protection Devices
• DC Disconnects: To safely disconnect the solar panels from the system during maintenance or emergencies.
• AC Disconnects: Disconnects the inverter and other AC components from the electrical load or grid.
• Fuses and Circuit Breakers: Protect the system from electrical faults and overloads.
Please quote for the following wholesale product requirement -
Product Name: Density Board MDF, HDF
Specifications :
Size Requirements 1275/1280*2525/2530*2.5mm
1275/1280*3085/3090*2.5mm
Requirements:
1. Must Have FSC, Raw Materials Must Be FSC Raw Materials
Quantity Required : 3 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Viet Nam
Payment Terms : To be discussed with sellers
Looking for suppliers from : Malaysia, Indonesia
Contact : Lan Vo
Please quote for the following wholesale product requirement -
Product Name: Polyethylene Sheet
Specifications :
High Density
Quantity Required : 500 Kilogram/Kilograms
Shipping Terms : FOB
Destination Port : Poland
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Marta Piotrowska
Please quote for the following wholesale product requirement -
Product Name: Steel Drum, Barrel
Specifications :
Units: Material: Commercial Grade Steel Specifications: Brand New And Made In Accordance With Iso 15750-1 Open Top With Leak-proof Quick-closing Lids Low/high-density Polyethylene Anti-static Type Internal Lining Fully Removable Top Cover With Gasket And Closing Ring Galvanized Tension Ring With Lock And Locking Lever External Painting: Black Color Steel Thickness: Body 0.8 Mm, Top 1 Mm, Bottom 1 Mm Internal Surface: Polyethylene Lined Top And Bottom Seam: Triple Seamed Body Seam: Electrically Welded UN Marking: 1A2/Y1.2/100/18/P/VL609 or 1A2/X320/S/18/P/VL609 (or both) Capacity: 210L
Quantity Required : 1752 Piece/Pieces
Shipping Terms : CIF
Destination Port : Oman
Payment Terms : To be discussed with sellers
Looking for suppliers from : Worldwide
Contact : Abdallah Najjarine
Ldpe, lldpe (low density polyethylene)
Polyethylene: llpde (linear low density polyethylene)
High density polyethylene hdpe
High density polyethylene hdpe
High density polyethylene hdpe
Fertilizers, sulphur, liquid sulfur, urea, diammonium phosphate (dap), triple super phosphate (tsp), granular triple super phosphate (gtsp), muriate of potash (mop), rock phosphate, chemical materials, sodium hydroxide, bauxite, bitumen asphalt, feldspar, quartz, kaolinite, red clay, slack wax, butyl acrylate, glacial acrylic acid, polymers, polypropylene, high density polyethylene, low density polyethylene, industrial materials, cement, steel, clinker, iron, oils, petroleum coke
Please quote for the following wholesale product requirement -
Product Name: Shoe Lining Material
Specifications:
Type: Pp Co Polymers, High Density Polyethylene Etc.
Feature: Waterproof, Safety, Eco-friendly, Disposable
Packaging Terms : Standard
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : FOB/CIF
Destination Port : Sri Lanka
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Ms. Nethmini
Polymers Such As Virgin, Off Spec, Off Grade, Plastic Scrap, Reprocess Material, Plastic Form Of Granules, Powder, Baled & Roll And Lumps, Hdpe (high Density Polyethylene), Ldpe (low Density Polyethylene), Lldpe (linear Low Density Polyethylene), Pp (Polypropylene), Pvc (Polyvinyl Chloride), Pet (Polyethylene Terephthalate), Pc (Poly Carbonate)
The buyer would like to receive quotations for -
Product Name: Resin
Specifications :
Type: Acrylic Resin, Polypropylene, Polyethylene Resin, Etc.
Use: Industrial
Quantity Required : 1 Forty-Foot Container
Shipping Terms : CNF Or FOB
Destination Port : Colombo, Sri Lanka
Payment Terms : L/C Or T/T
Looking for suppliers from : Worldwide
Contact : Devander
Buyer is interested to receive quotations for the following RFQ -
Product Name: Polyethylene Terephthalate
Specifications :
Use: For Producing Pet Bottles & Preforms
Packaging Terms : Customized
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Trinidad and Tobago
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Elvis Seelochan
Please quote for the following wholesale product requirement -
Product Name: Polyethylene Glycol 4000
Specification:
Category: Chemical
· Molecular weight: We are looking for a product with a molecular weight of 4000 or above.
· Purity: We require the product to be of high purity, with a minimum purity level of 99%.
· Solubility: The product should be soluble in water and other solvents.
· Viscosity: We require the product to have a specific viscosity range.
· Stability: The product should be stable under different temperature and pH conditions.
1 fcl - on container basis
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Turkey, Turkey
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Mutlu
