Australian pine logs
Buyer is interested to receive quotations for the following RFQ -
Product Name: Wood Chipper
Specifications :
On Track Crawler
Type: Machine
Quantity Required : 2 Unit/Units
Shipping Terms : CIF
Destination Port : Italy
Payment Terms : L/C Or T/T
Looking for suppliers from : Worldwide
Contact : Salvatore Tortorelli
Wood chips pulp grade, wood logs, timber and lumber, biomass fuels, oils, jet fuels, oil refinery products, lng, lpg
Timber decking, raw material, pine species
Ash wood and syp usa
Wood And Bamboo Materials
Sea urchin, seashell, agar wood, eel fish.
Brazilian sandals, wood, brazilian coffee, personalized wood box to pack wines and tea;
Wood, Lumber, Briquettes, Firewood, OSB.
Wood Raw Materials , Hardware
Extrusion Profiles, Anodising, Powder Coating And Wood Sublimation Finishing Treatments
Materials In The Form Of Foam, Wood, Cloth, Multiplex
Fabric And Wood Material
Iron, Ss, Cs Raw Material, Machines Like Lathe Machine, Cnc
Wood and timber all sorts, paper, agriculture products
Wood materials ; poultry and food; marine engines
The buyer would like to receive quotations for -
Product : Teak Wood Logs
Specifications:
Diameter : 120 - 130 diameter
Quantity : 200 - 300 Meters
Quantity Required : 200 - 300 Meter/Meters
Shipping Terms : CIF
Destination Port : Tuticorin Port, India
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Manoj Kumar
Plywood
Please quote for the following wholesale product requirement -
Product Name: Blockboards
Specifications:
3 layer panel product.
[material and dimensions]
The front and rear outer layers need to be 5mm thick solid cherry(American cherry), and the core is 9-12mm thick plywood(made in low hardness wood like poplar or spruce). So, the total thickness of the panel would be 19 - 22mm. For the width and length, they are 1220*1220mm.
We want both the front and rear cherry layers to be;
[cherry board grade]
- a premium grade with no knots or other imperfections
- straight grains most preferred, and curly grains to be avoided.
- surface to be sanded smooth.
[cherry board size and orientation]
- wide cherry boards to be used to have the minimum glue lines(8 cherry boards at most on each side of the panel, and fewer than 8 would be great).
- continous stave(no cherry boards are joined lengthwise)
- cherry boards are oriented in the same direction between the front and the rear of the panel.
[glue for cherry boards]
- polyurethane glue preferred, D4. If you have a better alternative, please advise. The dried glue needs to be less hard than the surrounding cherry wood.
- Please note that in our use of the panel, it can be in contact with water often, for hours each time.
- Surfaces to be glued need to be fully covered with glue, without missing any part resulting in dry joint, so that water does not penetrate in such a dry joint and split the joint.
- light tight between adjoining boards when glue is not applied yet(You cannot see light come through from the opposite side, meaning all board edges are very straight. Once the boards are glue joined, the glue line is almost invisible.)
Quantity : 20 foot container load for the initial purchase
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Sydney, Australia
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Steve Bae
Please quote for the following wholesale product requirement -
Product; FSC certified MDF Board
Specifications:
of 3, 6,9, 12,16, 18 & 25mm.
Note: Please share Density, HSS code and TDS
Qty: MOQ
Quantity Required : MOQ
Shipping Terms : FOB
Payment Terms : LC at sight
Looking for suppliers from : Worldwide
Contact : Md. Mongur Hossain
