Specifications:
Material Specifications:
Material Type: Low-Density Polyethylene (LDPE)
Color: Black / Grey / Amber (No other colors allowed)
Gloss: Medium
Shape: Single and uniform shape and size
Impurities: Not present
Moisture Content: No moisture allowed (visually dry)
Hardness and Flexibility: Flexible, manually checked, no brittle particles
Cutting Edges: Uniform, no other color contamination
Extrudate Finishing: Smooth
Packing Condition: 25 kg bags or jumbo bags, damage-free, protected from moisture
Melt Flow Index (MFI):
Test Method: ASTM D1238
Value: 0.22 g/10 min at 190°C
Accepted Result: 0.1633 g/10 min (within tolerance)
Specifications:
Quantity:
1000 Piece/Pieces
1. Custom 3D cutout metal stickers to be attached to the phone using double-sided adhesive" size 3x4 cm
(Option-1) 4 designs (500 of each design)
2. Custom 3D cutout metal stickers to be attached to the phone using double-sided adhesive" size 5x6 cm
(Option-2) 4 designs (500 of each design)
information:
• Filling terminal location(s) and loading procedures
• FOB pricing structure
• Port specifications and limitations for LPG tankers
• Applicable port fees
• Laycan: 30 July - 1 August 2025
• Average waiting time at anchorage prior to berthing
• Current vessel congestion or delays (if any)
• Nomination, scheduling, and ETA notice requirement
• Any regulatory, compliance, or logistical requirements (e.g., pump flow rate)
Buyer is interested to receive quotations for the following RFQ -
Product Name: Quartz Tubes
Specifications:
High Temperature Resistant Quartz Glass Tubes Cylinder
• Inner diameter: 150 mm
• Wall thickness: 4 or 5 ± 1.2 mm
• Outer diameter tolerance: ± 4.5 mm
• Length: 1000 ± 5 mm
• Straightness tolerance of the tubes must not exceed 0.4% of the tube length
• Tube ends must be cut evenly and ground, chips larger than 2 mm are not allowed
• Working temperature: 1250 C
• Tubes must be resistant to crystallization: when tested at 1000 C for 2 hours followed by air cooling, no signs of crystallization should appear on the tube surface
• Tubes must be thermally resistant: after heating to 800 C and subsequent cooling in running water, they must withstand 15 thermal cycles without cracks, fractures, chips, or spalls
• The tubes must be chemically resistant to acids
• Each tube must be packed individually for shipping
Please quote for the following wholesale product requirement -
Product : 1MT Jumbo Bags (FIBC)
Specifications:
for Bentonite
Polypropylene bulk bags of 1.0 ton, which should comply with BS EN ISO 21898:2005 and having the with following specifications:
1. Outer bag: Heavy Duty Polypropylene Fabric, 240 g/m, UV stabilized, Polyethylene liner or lamination, which fits into FIBC. Liner thickness should be a 6 mil LLD Polyethylene stitched all the way.
2. Safe Working Load (SWL) 1.5MT
3. Safety Factor: 6:1(both for Offshore and onshore).¨
4. Bag Type:
a. Standard duty reusable for offshore requirement
b. Single trip for onshore requirement.
5. Lifting Loops: Cross corner lifting straps which are stitched all the way around the bag, Color contrasting from the bag's fabric color.¨
6. Filling and discharge: Jumbo bag should have top & bottom spouts for filling and discharge, cord tied, the inner bag to be attached to the top of the outer bag.
7. UV Protection: The bags should be UV treated to the minimum level of 200 Kly. The residual tensile. Strength of the bulk bag should at least be 50% after 12 months.
8. The Bags should have permanently attached label with the following information¨
Manufacturer & Supplier names/address¨
FIBC Class¨
Date of Manufacture¨
Maximum Stacking Height¨
Special treatment¨
Safety Factor
9. Size 95cm x 95cm x 120cm
Quantity: 1 full container
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Jebel Ali Port, United Arab Emirates
