Disposable syringe luer lock with needle
The buyer would like to receive quotations for -
Product Name: Laboratory Equipments
Specification with Quantity -
Stainless Steel Sharp Ends Forceps – quantity 3
Chemically resistant and non-contaminating
Non-protein binding and providing bio-inert surfaces
No critical quantities lost due to sticking
No build up on surfaces
Ideal for use under severe laboratory conditions
Excellent non-wetting properties for easy cleaning and can be steam or chemically sterilized
With guide pin
Test tube
Made of Borosilicate glass material.
Uniform bottom, fire-polished rims and consistent lengths.
Suitable for all usual laboratory applications
Volume: 10 mL – quantity 100
Volume 20 mL – quantity 100
Test tube rack – quantity 5
Rack can be securely carried and are fully autoclavable
Racks remain fully orientated until they are twisted again
Use different sizes of test tubes at the same time
Tubes (6 x 15 mL, 9 x 1.5/2.0 mL, 12 x 0.5 mL, 32 x 0.2 mL)
Hi-Accuracy Thermometer – quantity 1
Available with one probe or two probes
Monitor inlet and outlet simultaneously
Thermometer – quantity 3
Water-resistant and shockproof
Stainless-steel probe is resistant to most acids, bases and solvents
Reading updates every second
Memory recall of highest and lowest temperature readings, over period of 5 hours
Silver-oxide battery included
Wide temperature range
Needles – quantity 16 box
Hypodermic needles with thin walls for optimal flow
Fits Luer slip syringes
Colour coded for quick recognition of gauge for easy selection of appropriate flow rate
Sterile and individually wrapped for hygienic, single-use application
Stainless steel needles with epoxy resin adhesives
Needle Gauge: 16G to 28G
Insulin Syringe – quantity 10 box
Individually packed
Sterilized
Use with 1 ml insulin syringe
Length: 60 mm
Sterile Syringes for Single Use – quantity 20 boxes
Sterile
Individually wrapped in a paper/plastic blister pack
Size: 5 mL – quantity 10 boxes
Size 10 mL – quantity 10 boxes
Automatic Syringe – quantity 4
Pistol grip handle.
Self-refilling automatic syringe.
Detachable Luer lock valve system.
High chemical resistance.
Corrosion resistant.
Optimal hand balance and ergonomics
Fast and reliable volume setting.
High reproducibility due to safety locking nut on a micrometric screw.
Plastic Test Tube
Provide reliable containment of laboratory fluid samples
Polypropylene tubes are best suited for applications requiring greater thermal and chemical stability
Dual-position snap caps, heavier gauge walls, and unique construction provide a secure, positive seal
Medical-style packaging materials
3,000 RCF rating (RCF claims refer to Relative Centrifugal Force measured in g-force for materials with a specific gravity of 1.0, used in an appropriate rotor with correct cushion and safety precautions. Tubes used
with organic solvents at temperatures below 0°C may have lower RCF ratings.)
Size: 15mL – quantity 1000
50mL – quantity 1000
Counting chamber /slides. – quantity 20 box
Disposable counting chamber, 20 µm depth, 4 counting areas per slide for semen concentration measurement with CASA systems ,20 PCS/BOX
Covered with a special coating to prevent air bubble formation and to prevent semen from sticking to the chamber surface.
Material non-toxic to sperm cells.
Suitable for low and high sperm concentrations.
Storage: room temperature, noncondensing conditions.
Quality control of each production batch includes: sperm compatibility, chamber height, filling capability, absence of impurities / particles that interfere with concentration measurement
Test tube: 10cm ,disposable ,plastic – quantity 10000 tube
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Bulgaria
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Lyubomira Kostadinova
Furniture, sanitary, bar stools, construction machinery, wallpapers, safes, locks, props
Please quote for the following wholesale product requirement -
Product Name: Car Aroma Diffuser Perfume Bottles
Specifications:
Size: 5ml And 10ml
Color: Black
Material: Glass
Shape: Square
Surface Handling: Screen Printing
Quantity Required : 4000 Unit/Units
Shipping Terms : Ex-works
Destination Port : Other-Not Shown
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Ivan Ivanov
Please quote for the following wholesale product requirement -
Product Name: Portable Aluminum Suitcase
Specifications :
portable aluminum suitcase with minimal dimensions 550 x 250 x 100 mm
Custom Dimension Equipment Carrying Aluminum Tool Case with Shaped Foam Interior Hard Aluminum Flight Case with Handle and Wheel
Quantity : Initially 50 Pieces for sample & later more
Quantity Required : 50 Piece/Pieces(sample)
Shipping Terms : CIF
Destination Port : Bulgaria
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Viktor Tsachev
The buyer would like to receive quotations for -
Product Name: Cooking And Feeding Sets
Specifications :
Send Also Photos
Specifications Required Specifications Offered, Including Photos
Description Of Requirements For 1 /one/ Set
1. casserole
With Folding
Handle
Minimum 2.5 L. Useful Volume, With A Diameter Of At Least
20cm. and A Minimum Of 10cm. height. made Of
Stainless Metal Alloy, Aluminum
2. pan With
Folding Handle
Minimum 0,7 L. Useful Volume, With A Diameter Of At Least
20cm. and A Minimum Of 4cm In Height. made Of
Stainless Metal Alloy, Aluminum
3. cups
Volume Of Minimum 0,25 L.
Made Of Material Resistant To Heat (at A Minimum Of 100
°c), Shocks And Deformation. Made Of Stainless Metal
Alloy/aluminum .
Reusable
4. plates With A Diameter Of At Least 20cm
Made Of Material Resistant To Heat (at A Minimum Of 100
°C), shocks and deformation. Made of stainless metal
Alloy, Aluminum
Reusable
5. set
Fork
Spoon
Knife
Fork, Spoon And Knife. Made Of Material Resistant To Heat
(at A Minimum Of 100 °c), Shocks And Deformation.
Reusable
6. Goods From Items 1 To 5 Must Be Placed In The Case. the
Layout In The Case Must Be Optimized To Reduce Transport
Noise And Prevent Damage To The Components In The Kit
7. gas Hob For
Cooking
Power: Minimum 1300w
Maximum Consumption: 170 Gr/h
Minimum Hob/stove Diameter 13cm
Comply With En 521 Or Equivalent Compatible With A
Gass Screw Bottle Complying With En 417 Or Equivalent
8. gas Bottle
Capacity Minimum 400 G. gas.
Comply With En 417 Or Equivalent Compatible With A
Screw Hob Complying With EN 521 or equivalent
Quantity Required : 1250 - 5000 Piece/Pieces
Shipping Terms : CIF
Destination Port : Varna, Bulgaria
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Stanislav Liov
Cardboard boxes, product packaging, industrial packaging, packing carton, standard a box cardboard box, flaps fully overlap box, envelope base box, self locking tray box, five panel wrap, die cut box
The buyer would like to receive quotations for -
Product Name: TS Beds, TS Tents
Specifications :
Send Also Photos
Rollaway Beds
Dimensions In Unfolded
Position
Length Not Less Than 190cm
Width Not Less Than 65cm
Height From The Ground Not Less Than 40cm
Dimensions In Folded
Position
Length Not More Than 110cm.
Width Not More Than 25cm.
Thickness No More Than 20cm
Construction Lightweight Metal Construction With Bed Legs Stoppers
Textile Part Made Of Reinforced Polyester. smooth Surface Resistant To
Water And Dirt.
Load Capacity Minimum 120 Kg.
Weight Weight – Not More Than 10 Kg.
Storage And Transportation
Bag
Bag For Storing And Transporting The Rollaway Bed With
Handle(s) With The Possibility Of Carrying Over A Shoulder
Specifications Required
Tents - 500 Pieces Manufacturer
model
1. Sizes
Length At The Base (external Size) – Not Less Than 4,90 M
Width At The Base (outer Size) – Not Less Than 4,70 M
Height From The Ground To The Top (highest Point) – Not Less Than 2,5
M
Side Wall Height(s) – Not Less Than 1,7 M
Capacity Of The Tent - For A Minimum Of 8 Persons, single Rollaway
Beds For 8 People
2. Construction
Lightweight Prefabricated construction With High Durability And
Resistance To Twisting;
Main Material Of The Construction – Aluminum Alloy
Accessories For Assembly And Fastening: Scaffolding Fittings,
Coupling Elements, strengthening Elements, Ground Anchorage Pegs,
Ropes, Etc. according To The Manufacturer's Decision
3. Material
Material – Textiles Made Of Cotton/polyester (minimum 50 %
Cotton)
Specific Mass Of The Material (mass Per Unit Area) – Not Less Than 420
G/m 2
Hard-to-burn material Fire Resisting Class Not Lower Than "b"
According To En 13501-1 Or Equivalent;
Breathable, Waterproof, impregnated;
Resistant To Rupture;
Provide Protection Against water Ingress With Water Resistance Of
Textiles Of At Least 420 Mm Water Column
4. 2 Opposite Entrances With Minimum Size: Width - 1m And Height - 2
Entrance M With Zip To Close with Opening/closing On Both Sides;
One Of The Two Entrances Shall Be Fitted With The Relevant Elements
Enabling The Tents To Be Directly Connected To Each Other;
5. Windows
2 Windows With Sizes At Least 40 X 60 Cm, Located One On Two
Opposite Sides Other Than The Entrances Fitted With An Insect Net And
An Outer Lid Winding Into A Roll With Fixing Elements
6. Weight Weight Of Tent With Structural Elements And Accessories – Not More
Than 85 Kg
7.
Water
Repellent safety
Tape
At The Bottom Along The Entire Circumference, The Tent Is Equipped
With An Additional Pvc Water Repellent Tape, Preventing Water From
Entering The Interior
8. Storage Bags Bag(s) For Storing The Tent And Tent Accessories.
9. Sustainability
Requirements
The Tent Shall Be Resistant To Load On The Roof With A Minimum Of
0,105 Kn/m 2 (10,5 Kg/m 2 ) Of Snow And Shall Be Wind Resistant At A
Speed Of At Least 0,14 Kn/m 2 (15 M/s) According To En 13782 Or
Equivalent
Quantity Required : 500 - 5000 Piece/Pieces
Shipping Terms : CIF
Destination Port : Varna, Bulgaria
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Stanislav Liov
