Buyer is interested to receive quotations for the following RFQ -
Product Name: Medical Test Kits Like DOA Saliva Test Kits
Specifications :
The test should be accurate and reliable.
The test should be easy to use and understand.
The test should provide quick results.
The test should be affordable.
The test should have a valid CE.
Qty : MOQ
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Jordan, Jordan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Amer Sider
Please quote for the following wholesale product requirement -
Product Name: Rapid Test Kits
Specifications :
Rota Adeno Virus H Polari Anti Body H Polari Antigen Hbs Rapid Test Hcg Enhanced Sensitivity Rapid Test HIV Cardiac Troponin Rapid Test HCV Syphilis
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Bilal Anani
Please provide a quotation to the following requirement from the importer -
Specifications:
- Electrical Test Equipment For Substation And Protection Relay Testing
- Raptor Primary Test System, PME-500-TR circuit breaker test set, PTE-100-C secondary injection test set
Use: Protection Relay Field And In General, Tests And Measurement Equipment Related To The Commissioning And Maintenance In Substations, Power Plants And Energy Systems.
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Shayam
Please provide a quotation to the following requirement from importer -
Product Name: Test Devices
Specifications:
Type: The Original Probe (Mechanical Sector) From Well, Wed-3000, Wed-160, Probe Convex Or Liner, Pregnancy Test Device
For Animals
Quantity Required : 1 Twenty-Foot Container
Shipping Terms : CIF
Destination Port : Amman, Jordan
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Hasan Eldos
Real time RT PCR detection kit
Buyer is interested to receive quotations for the following RFQ -
Product Name: Trupoint Plastic And Composite Doctor Blades
Specifications:
Type: Plastic Doctor Blade
Material: UHMW (white scraper)
L/CM: 70
LPI: 180
Condition: New
Warranty: Unavailable
Applicable Industries: Manufacturing Plant
Applicable Industries: Machinery Repair Shops
Applicable Industries: Food & Beverage Factory
Applicable Industries: Printing Shops
After Warranty Service: Online support
Local Service Location: None
Showroom Location: None
Video outgoing-inspection: Provided
Machinery Test Report: Not Available
Marketing Type: Ordinary Product
Type: Plastic doctor blade
Use: Any machine
Quantity Required : 1 Twenty-Foot Container(sample)
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Rami Baq
Drilling Tools, Equipment For Mineral Exploration, Site Investigation, Water Well Construction
The buyer would like to receive quotations for -
Product Name: Stay Wire
Specifications:
stranded steel wires
Stay wires shall be stranded steel wires, manufactured to BS 183, galvanized to BSI BS EN ISO 1461 with a minimum mean coating thickness of 2.83µm, or related IEC or other standards.
With a minimum breaking load of 60 K Newton. Stay wires shall be high tensile hot-dip galvanized with a diameter of 12mm (4mmx7). They shall be easy to bend and erect (not hard).
The outermost layer of stay wire shall be stranded with the right-hand lay.
All Stay wires shall be supplied on robust drums of approved materials and construction suitable to withstand
very rough transport and handling and to enable conductors or cables to be pulled out smoothly.
Drums shall be non-returnable and, if made from timber, shall be pressure–impregnated against fungal and insect attacks.
Wooden drums shall be lagged with closely fitting battens in accordance with standards as may be approved.
Battens shall be firmly secured to the drum flanges and finally, steel banded under tension close to each flange
using steel tape not less than 25 mm wide and 2mm thick and stapled to at least every third batten.
Drum spindle holes shall be reinforced by steel plates.
INSPECTION AND TESTING
• Test at Manufacturer’s Works.
• Galvanizing- Test.
Stay wire supplied shall be easily cut by a hacksaw and easily bent through 180 by hand since bulldog clamps are to be used for fixing stay wires after bending
Quantity Required : 75 Kilometer/Kilometers
Shipping Terms : CFR
Destination Port : Aqaba, Jordan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Ramzi Saba
Please quote for the following wholesale product requirement -
Product Name: DI Fittings
Specifications :
Item # Description QTY Unit
1 All Flange Tee 100 × 100 × 100 mm 16 Bar 200 Each
2 All Flange Tee 150 × 100 × 150 mm 16 Bar 50 Each
3 All Flange Tee 150 × 150 × 150 mm 16 Bar 10 Each
4 All Flange Tee 200 × 200 × 200 mm 16 Bar 10 Each
5 Ductile Double Flange Elbow 100mm 90 Degree 16 Bar 50 Each
6 Ductile Double Flange Elbow 100mm 45 Degree 16 Bar 65 Each
7 Ductile Socket Flange 150mm 16 Bar 15 Each
8 Ductile Socket Flange 200mm 16 Bar 15 Each
9 Universal Coupling Ductile 100mm 16 Bar 200 Each
10 Universal Coupling Ductile 150mm 16 Bar 100 Each
11 Universal Coupling Ductile 200mm 16 Bar 50 Each
12 Flange Adaptor Ductile 100mm 16 Bar 750 Each
13 Flange Adaptor Ductile 150mm 16 Bar 300 Each
14 Flange Adaptor Ductile 200mm 16 Bar 100 Each
15 Ductile Blank Flange 100 mm 16 Bar 200 Each
16 Ductile Blank Flange 150 mm 16 Bar 25 Each
17 Ductile Blank Flange 200 mm 16 Bar 20 Each
18 Ductile Reducer Flange 200 mm × 100mm 16 Bar 25 Each
19 Ductile Reducer Flange 200 mm × 150mm 16 Bar 25 Each
20 Ductile Tapping Saddle Clamp 100 × 25 mm 16 Bar 500 Each
21 Ductile Tapping Saddle Clamp 100 × 32 mm 16 Bar 600 Each
22 Ductile Tapping Saddle Clamp 150 × 25 mm 16 Bar 350 Each
23 Ductile Tapping Saddle Clamp 150 × 32 mm 16 Bar 250 Each
24 Ductile Tapping Saddle Clamp 150 × 63 mm 16 Bar 150 Each
1. General
1.1 Potable Water Certification
All fittings, gaskets and materials shall be certified for potable water use, and all pipes and materials should be certified as safe for transporting potable water by an independent testing laboratory. All material in contact with or likely to come into contact with water for public shall introduced with the requirements of BS 6920 (suitability for non metallic products for use in contact with drinking water) or any equivalent standard as well as the Jordanian standard (JS 286/2008) and the requirements of EN 15664 ( influence of metallic materials on water intended for human consumption ) or any equivalent standard and the World Health Organization standard (WHO), and whenever the regulation is changed it is the supplier responsibility to ensure conformity with any new requirements.
1.2 Toxic Materials
All fittings, coating, sealing and lining material shall be certified for potable water use and shall contain no ingredients that may migrate into water in amounts that are considered to be toxic or otherwise dangerous for health. Pipes and pipeline components, including their protective coatings and joint materials, that will or may come into contact with potable water shall not constitute a toxic hazard, shall not support microbial growth, shall not cause taste or odour, cloudiness or discolouration of the water and shall contain no ingredients that may migrate into water in amounts that are considered to be toxic or otherwise dangerous for health.
Non-toxicity certificate should be provided in English.
1.3 Third Party witness
The supplier/contractor shall furnish an original certificate from third party inspection agency showing all test results and analysis required by the applicable standard according to which the materials have been manufactured. The third party inspection agency shall under this contract, have witnessed the manufacture and testing operation to verify compliance with the technical specifications and the relevant standard. All certification should be from third party, and the certification should be valid and up to date, in English, and it must be shown in the certificate which batch is being tested to make sure that this certificate is for the right batch.
Quantity Required : MOQ
Shipping Terms : CFR
Destination Port : Aqaba, Jordan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Ramzi Saba
Please provide a quotation to the following requirement from importer -
Product Name: GI Fittings
Specifications :
Item Description Qty Unit
1 GI Coupling 1/2" Weldable 1,500 Ea (10pcs/Bag)
2 GI Coupling 3/4" Weldable 1,500 Ea (10pcs/Bag)
3 Weldable 1" Coupling GI 1,000 Ea (10pcs/Bag)
4 Weldable 2" Coupling GI 500 Ea (5pcs/Bag)
5 GI Union Joint 1/2" 200 Ea (10pcs/Bag)
6 GI Union Joint 3/4" 1,000 Ea (10pcs/Bag)
7 GI Union Joint 1" 1,000 Ea (10pcs/Bag)
8 GI Union Joint 2" 500 Ea (5pcs/Bag)
9 GI Nipple 1/2" 25,000 Ea (10pcs/Bag)
10 GI Nipple 3/4" 33,000 Ea (10pcs/Bag)
11 GI Nipple 1" 5,00 Ea (10pcs/Bag)
12 GI Nipple 2" 1,000 Ea (5pcs/Bag)
13 GI Reducer 3/4" x 1/2" 20,000 Ea (10pcs/Bag)
14 GI Reducer 1" x 1/2" 1,000 Ea (10pcs/Bag)
15 GI Reducer 1" x 3/4" 6,000 Ea (10pcs/Bag)
16 GI Reducer 2" x 3/4" 200 Ea (5pcs/Bag)
17 GI Reducer 2" x 1" 200 Ea (5pcs/Bag)
18 GI Tee 1/2" 200 Ea (10pcs/Bag)
19 GI Tee 3/4" 4,000 Ea (10pcs/Bag)
20 GI Tee 1" 500 Ea (10pcs/Bag)
21 GI Tee 2" 100 Ea (5pcs/Bag)
22 GI Tee Reducer 3/4" x 1/2" x 3/4" 4,000 Ea (10pcs/Bag)
23 GI Tee Reducer 1" x 1/2" x 1" 1,000 Ea (10pcs/Bag)
24 GI Cross 3/4" 500 Ea (10pcs/Bag)
25 GI Cross 1" 500 Ea (10pcs/Bag)
26 GI Elbow 1/2" 1000 Ea (10pcs/Bag)
27 GI Elbow 3/4" 15,000 Ea (10pcs/Bag)
28 GI Elbow 1" 3,500 Ea (10pcs/Bag)
29 GI Elbow 2" 500 Ea (5pcs/Bag)
30 GI Reducer Elbow 1" x 1/2" 100 Ea (10pcs/Bag)
31 GI Reducer Elbow 3/4" x 1/2" 250 Ea (10pcs/Bag)
32 GI plug 1/2" with a hole 4,500 Ea (10pcs/Bag)
33 GI plug 3/4" with a hole 1,000 Ea (10pcs/Bag)
34 GI plug 1" with a hole 1,000 Ea (10pcs/Bag)
35 GI plug 2" with a hole 500 Ea (5pcs/Bag)
Galvanized Iron Fittings specifications
1.1 Ambient Conditions
All Fittings, materials and Equipment shall be in every respect suitable for storage, installation, use and operation in the conditions of temperature, humidity and The PH and water quality appertaining in Jordan.
The atmospheric temperature in Jordan varies between -10°C and 50 °C.
1.2 Potable Water Certification
All Fittings and materials shall be certified for potable water use, and all fittings and materials should be certified as safe for transporting potable water by an independent testing laboratory. All material in contact with or likely to come into contact with water for public shall introduced with the requirements of BS 6920 (suitability for non metallic products for use in contact with drinking water) or any equivalent standard as well as the Jordanian standard (JS 286/2008) and the requirements of EN 15664 ( influence of metallic materials on water intended for human consumption ) or any equivalent standard and the World Health Organization standard (WHO), and whenever the regulation is changed it is the supplier responsibility to ensure conformity with any new requirements..
1.3 Toxic Materials
Fittings and components, including their protective coatings and joint materials, that will or may come into contact with potable water shall not constitute a toxic hazard, shall not support microbial growth, shall not cause taste or odour, cloudiness or discoloration of the water and shall contain no ingredients that may migrate into water in amounts that are considered to be toxic or otherwise dangerous for health Non toxicity certificate should be provided.
1.4 Third Party Witness
The supplier must submit at least 3 different international third party companies where Miyahuna will choose one of them.
The supplier shall furnish an original certificate from a third party inspection agency showing all test resu
Quantity Required : MOQ
Shipping Terms : CFR
Destination Port : Aqaba, Jordan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Ramzi Saba
Russia and non russia oil and gas (kazakhstan, qatar, netherlands) oil and gas products such as en590 10ppm, d6, jet fuel a1 & 54, lng, lco, ago, d2, espo, pet coke, sulphur, urea 46 granular/prilled and others. in addtion, nitrile gloves, face mask, covid testing kits, and other ppe products to overseas including the usa & europe & other countries.
The buyer would like to receive quotations for -
Product Name : Industrial Radiator
Specifications:
Looking For 2 Types Of Radiator:
1. Cooling Water Heat Exchanger as per the following specifications: (needed quantity : 1)
• Air To Water Heat Exchanger
Ge Part No.: 298a8917p003/298a8917p001. Manufacturer: Aerofin/ Usa.
Headers: Carbon Steel, Outside The Casing.
Tubes: 5/8" Od X .025" Avg Wall Seamless Copper With Bends. Joints: Brazed.
Fins: Aluminum Edgewound At 14 Fpi - Cannot Be Solder 1coated. Casing: Galvanized Steel Sheet.
Conns: 4" Ips Victaulic Carbon Steel (same End).
No. Of Tubes: 208.
No. Of Columns: 8.
No. Of Rows: 52.
No. Of Length: 5.23 M.
Height: 1.17 M.
• Width: 34 Cm.
Quality: Includes Metal Nametag And Pneumatic Test Report.
2. Cooling Water Heat Exchanger As Per The Following Specifications And The Attached Drawing Quantity : 2
• Air To Water Heat Exchanger
• Mfg: Luwa Japan Ltd.
• MFG No.: NGO 244-1
Quantity:
2-3 Piece/Pieces
Quantity Required : 2 - 3 Piece/Pieces
Shipping Terms : Ex Works
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Rateb Abuhussien
The buyer would like to receive quotations for -
Product : White Spirit
Specifications :
Quantity : 2000MT*12
Packing: steel drums Inspection company: SGS or any others recognized inspection company
Quantity Required : 2000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Aqaba, Jordan
Payment Terms : DLC
Looking for suppliers from : Worldwide
Contact : Arqam Alsayagh
The buyer would like to receive quotations for -
Product Name : White Corn
Specifications:
For Human Consumption
Quantity Required : 50,000 Tons And 100000 Tons For Two Different
Quantity Required : 50000 - 100000 Ton/Tons
Shipping Terms : FOB
Destination Port : Other-Not Shown
Payment Terms : DLC after inspection
Looking for suppliers from : Worldwide
Contact : Nayef Almnweer
Buyer is interested to receive quotations for the following RFQ -
Product Name: Diesel EN590 10 PPM
Specifications :
For Serious Sellers, Please Send Us Full Corporate Offer (FCO) With Procedure And Trade License For Diesel En590.
Interested Direct Sellers Or Refinery Mandate
Quantity Required : 100000 Metric Ton/Metric Tons
Quantity Required : 100000 Metric Ton/Metric Tons
Shipping Terms : FOB
Destination Port : Rotterdam And Fob Singapore., Other-Not Shown
Payment Terms : No Prepayment, No Deposit Dip Test, Pay MT103
Looking for suppliers from : Worldwide
Contact : Khalil Husni
Please quote for the following wholesale product requirement -
Product Name: EN590 10PPM ultra low Sulphur
Specifications:
Quantity: 100,0000 MT EN590 10PPM ultra low Sulphur. This is for one time trial
2) 400,000 MY En590 10ppm
NOTE: Please refer to the following Buyer's requirements, which must be included/considered in your SCO & FCO:
1) The buyer wants to purchase EN590 10 PPM Ultra Low Sulphur Diesel based on the following:
2) FOB Rotterdam Port is the delivery port for the one-month trial supply (100,000 MT).
3) FOB Rotterdam Port is the delivery port for the 12-month supply (400,000 MT) contract upon the success of the trial. Buyer will open a bank instrument for a 12 month contract.
4) Seller shall send seller's working procedure for buyer's acceptance
5) Seller shall send Company registration and Trading License to buyer for due diligence purposes
6) Buyer, upon acceptance of Seller's working procedure, will issue the ICPO 2.
7) Seller shall issue a commercial invoice (CI), and the buyer signs and returns the commercial invoice.
8) Seller shall issue the following Partial POP documents:
a) Tank Storage Receipt {TSR} with GPS coordinate and Physical Authorization to Verify {ATV} for Confirmation to Buyer Company.
b) Sanitize SGS Report for Successful Transaction.
c) Injection Report
d) Seller issues UDTA – Unconditional DIP Test
9) Buyer will contact the Seller's storage facility to enable Buyer SGS to gain access to the facility with the seller UDTA and execute the Quality & Quantity Inspection in the Tank Farm for FRESH Analytical Report/Result by SGS and Seller provide the SGS Test Report for buyer verification and confirmation.
10) Upon successful DIP test OR Confirmation of the SGS Test Report, Seller must share FULL POP documents and Buyer will make full payment via MT 103 T/T Wire Transfer to Seller bank account upon the invoice issued.
11) Seller injects product into Buyer’s vessel or injects into Buyer’s tanks Buyer or buyer take over the storage tanks, Seller transfer Title Ownership to buyer name and all export documents to buyer.
12) Upon conclusion of the first lift transaction, the seller pays all intermediaries involved in the Transaction and proceeds with the signing of the contract with Buyer.
Please also send me the NCNDA document
Please provide me with your feedback at the earliest possible.
Quantity Required : 100000 - 400000 Metric Ton/Metric Tons
Shipping Terms : FOB
Destination Port : Fujairah & Rotterdam., Other-Not Shown
Payment Terms : MT 103
Looking for suppliers from : Worldwide
Contact : Saleh Alkharoubi
Medical test kits like doa saliva test kits
The buyer would like to receive quotations for -
Product Name: Calibration And Metering Equipment
Specifications:
1: Long range Indicator calibrator
Indicator calibrator optimar 25 with digital readout.
Application: for both analog dial indicator, dial comparator, level type test indicators & digital indicators.
Measuring range: 25mm
Resolution: 0,1um (0.0001mm)
Accuracy: 0+/- 0.2um
Power Supply: (220-240 VAC), 50Hz
Long clearly readable LCD monochrome digital display.
Selectable for either Metric or Inch
Output: USB interface for PC, RS232 Interface
Inspection Program: QN Software/dial – 32 with laptop and printer
Accessories: all operational accessories
Footswitch for data transfer supplied with calibration certificate issued by a laboratory accredited (including the calibration error and uncertainty)
List#4 Standard Glass Scale
High precision glass scale
Accuracy: 0.005mm
Line width: 0.005mm
Measuring range: (0-300mm)
Wooden Case
Calibration Certificate from national metrology institute (NMI)(VSL, PTB, NPL)
List#5 CERA Caliper Checker
Specification:
Wrung high-grade CERA gage blocks in a protective casting
Range: 0-600mm
Accuracy of block pitch: +/-0.005mm
Parallelism of block pitch: 0.005mm
Calibraton Certificate from accredited lab.
List #6 measuring tape and rule calibrator
Calibration unit for checking scales rule and measuring tapes with 0.001 mm resolution
Clamping range: upto 2000mm,
Drawer load range: 20n – 50N
Measurement uncertainty: ((0.05)^2 + (0.005L)^2)^0.5 where L: M
The instrument should be supplied with the required computer, software and accs.
Supplied with calibration certificate from national metrology institute (UME, vsl, or NPL)
List#8 Standard Thickness Foil
Standard block for calibration coating thkness gauge.
Range: (from 0.001 – 1)mm
Calibration certificate from accredited lab.
List #9 Precision Electronic Level
Wireless talyvel 6 electronic precession
Level flatness measurement with PC and Software
Measuring range: 1600s
Resolution: 0.1 arc-sec
Accuracy: +/-0.2sec
Power: 220VAC 50Hz
Calibration Certificate from national metrology institute NMI metrology
List# 10 Small angle Generator
Used for calibration of angle measurement device (sprit level, electronic levels and autocollimators)
with software and PC
Range 1m SAG
Uncertainty measurement = 1 arc second.
Power: 220 VAC 50Hz
Calibration Certificate from national metrology institute NMI metrology
List #11 Handheld, calibrator (process calibrator with portable pressure calibrator)
Measurement and electrical pressure generation at the touch of a button with integrated pump
From -0.8..+20bar (11.6..+290psi)
Accuracy: 0.025% of reading +/- 0.01% FS(including calibration certificate)
Generation/measurement of 4…20mA, 24V voltage supply to power transmitter
Pressure supply via external compressed air-line
With calibration certificate from national accredited lab.
List# 12 Process Calibrator
With Hydraulic handheld pressure with integrated medium reservoir & ergonomic handling
With hydraulic hand spindle pump with function for calibration & pressure switch test
Range: 0-1000 bar
Accuracy: 0.05% FS
Medium: non-corrosive gases, liquids, water
With complete 4 test and service cases
With refence pressure sensor (interchangeable without tools) 1.2m
With Calibration Certificate from national accredited lab
List #13 mechanical vacuum pump
Minus 1bar (220V 50Hz)
With Calibration Certificate from nationally accredited lab
List #14 High Performance Pressure Generation and Control 200MPa PPCH
Precision: to 0.003% of Q-RPT span.
Volume: 0-100cc, 50cc optimum, operated in larger volumes but pressure stabilizing time increases
Dynamic Mode typical time to ready
180sec into a 50cc volume & 20% FS excursions with default hold-limits 1.0 MPa (150psi) (lower in optimum conditions and with PG7302.
RS232 Cable, 9-in 2m for PPC3 COM1 or PPC3 to RPM4 connection
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms :
Hand sanitizer, mask, covid 19 test kit
Buyer is interested to receive quotations for the following RFQ -
Product Name: Soya Oil
Specifications :
Style: Refined
Inspection: SGS
Performance Bond: 2%
Quantity Required : 100 Forty-Foot Container Monthly
Shipping Terms : CIF
Destination Port : South Korea (Republic Of Korea)
Payment Terms : 10% TT Advance, 20% TT Against B\L, 70% After Delivery And Shipment And Inspection Documents
Looking for suppliers from : Worldwide
Contact : Yusuf Rousan
