Please quote for the following wholesale product requirement -
Product: Steel Plates
Specifications:
Grade S235JR+N thickness 12mm width 250mm
Grade S235JR+N thickness 10mm width 150mm
Grade S275JR. thickness 4;5;6mm width 150mm (higher grades are acceptable, for example S355JR)
Grade S275JR. thickness 5;6;8mm width 200mm (higher grades are acceptable, for example S355JR)
Qty: 20-24 tons
Note: Suppliers From Turkey Only Preferred
Quantity Required : 20 - 24 Ton/Tons
Shipping Terms : CIF
Destination Port : Poland
Payment Terms : Bank Transfer
Looking for suppliers from : Turkey
Contact : Dariusz Modliski
Please provide a quotation to the following requirement from importer -
Product : Steel Plate Carbon, Hot Rolled, Alloy
Specifications:
STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X
WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM)
NO.35 Cr. Mn SiA
CHEMICAL COMPOSITION
C=0.32-0.39% Si=1.10-1.40%
Mn=0.80-1.10% Cr-1.10-1.40%
P=Max 0.025% S=Max 0.025%
Cu= Max 0.25% Ni = 0.30%
MECHANICAL PROPERTIES
Tensile strength=600-800(MPa)
Elongation = 16% Min
Quantity: 30,400 Kg.
ITEM # 2:
STEEL PLATE CARBON, HOT ROLLED, ALLOY
STRUCTURE ANNEALED (LENGTH= 1000MM+ 10/-0) X
WIDTH (180 MM + 5/-0) XTHICK (6MM ± 0.30MM)
NO.35 Cr. Mn SiA
CHEMICAL COMPOSITION
C=0.32-0.39% Si=1.10-1.40%
Mn=0.80-1.10% Cr-1.10-1.40%
P=Max 0.025% S=Max 0.025%
Cu= Max 0.25% Ni = 0.30%
MECHANICAL PROPERTIES
Tensile strength=600-800(MPa)
Elongation = 16% Min
Quantity: 35,700 Kg.
SPECIAL CONDITIONS: To be followed by Shipper/Maker;
1. Same (Single) competitive Unit Rate must be quoted against the same tendered items.
2. Full Qty falling in both inspection authorities must be quoted otherwise offer will be ignored.
3. Sample to be provided by the firms within 15 x days of technical opening except last Supplier,
4. Validity of offer at least 90 days (Extendable if required) would be considered w.e.f
commercial opening of tender (s) after acceptance of technical offers
5. Conditional offers are likely to be ignored.
6. Needful supporting technical literature/ Catalogue/ Brochure against each tender it
must accompany technical quotation if requisite/relevant technical literature found
missing, quotation will be considered rejected.
7. Performance Bond (in shape of CDR/B.G) should be provided against L.O.I for issuance of formal contract. However,
20 The supplier will render a Warranty / Guarantee Certificate for a period of 12 x months
from final acceptance of store
21 Protocol of inspection will be followed as per inspection authorities.
Further requirements:
· Supplier type: manufacturer
35 tons approx
Quantity Required : 35 Ton/Tons
Shipping Terms : CIF
Destination Port : Pakistan, Pakistan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Rashid Akhtar
Steel plate
Cold rolled plates
Steel plate
Steel plate h beam
Engraving plates
Steel plates
Alloy steel plates
Hot rolled steel plates
A516GR70 Plates
Hr Steel Plate De Coilers
Wear Resistant Steel Plate
Steel plates
Astm a36 carbon steel plates
Mild steel plate
Carbon steel plates
Hot Rolled Steel Plates
Wooden plate
Steel plates
